Download "user manual"
Transcript
Electrical Installations •Only accumulator batteries with bound electrolytes (gel batteries) may be installed in those positions specified by the manufacturer. •The installed gel battery may not be opened. •When changing ancillary batteries, use only batteries of the same make and capacity. •All of the electrical devices must be switched off before you disconnect or connect the ancillary battery. •Before replacing fuses you must first de-energise the charger. •Before replacing fuses you must first de-energise the charge controller. •Before replacing a blown fuse you must first fix whatever caused the fuse to blow. •Fuses may only be replaced by fuses with the same fuse protection value. •Airing the charge controller insufficiently will cause a reduction of the charge current. •The surface of the charger casing may become hot when the device is in operation. Position of the battery circuit breaker In the Renault, the battery circuit breaker is located in the Bpillar in the passenger door (see illustration above). Fiat Drive directly on the passenger seat. A circuit breaker has been installed to protect the modular battery from being exhaustively discharged when the motor home is not being used. When the switch is opened, the modular battery is completed disconnected from the 12 V mains. "Off" position = disconnected from 12V mains. 07-28