Download here - Dragon/ips

CHAPTER 1. INTRODUCTION TO DRAGON
Dragon. To run the Manual Reader from the command line, switch to the Dragon
system directory and type:
ManReader
To bring up the Manual Reader when you are running Dragon, choose the
Help⇒User Manual menu item.
The Manual Reader has three tabbed panes. The leftmost tab, labeled Contents,
displays a table of contents in a tree-structured form. Figure 1.2 shows the Manual
Reader contents page. When you select a topic from the tree, the center tab, labeled
Description, comes to the front, showing the text of the currently-selected topic.
Buttons at the bottom of the application allow you to navigate to the next or
previous topic in the document.
Figure 1.2: Manual reader table of contents pane
The third tab, labeled Details, is enabled only for sections of the manual that describe specific Dragon operations. In these cases, clicking on Details will display a
table showing all the parameters associated with the operation, with their meanings,
defaults, and the Dragon command language code (parameter specifier ) for each
one. If the topic displayed in the Description pane does not relate to a specific
Dragon operation, the Details tab will be disabled. Figure 1.3 shows a sample
Details page.
When the Details pane is displayed, the Previous Topic and Next Topic buttons
are disabled. You must return to one of the other panes to select a new topic.
6
c
Copyright Goldin-Rudahl
Systems, Inc