Download caution - WSB Finishing Equipment

EDITION 01/2008
PART NO. DOC353841
AquaCoat GM 2900EAW
OPERATING MANUAL
5.4.4
CHANGING FROM ROUND JET NOZZLE TO FLAT JET NOZZLE
Round jet nozzle
A+C
B
K
H
F
E
G
L
B_01929
Flat jet nozzle
1.
2.
3.
4.
5.
6.
7.
8.
Switch off the control unit and remove the front panel.
Relieve spray gun and unit pressure.
Replace paint with cleaning solvent, and.
Thoroughly flush spray gun.
Relieve spray gun and unit pressure.
Unscrew the nut (B) by hand and remove it.
Remove the nozzle body (C) and the nozzle insert Supra (A).
Take flat jet nozzle (E) into air cap (F). Place both of them parts in the cone of the collar
(G).
9. Screw nut (H) on the gun body (K). Adjust desired jet level by means of air cap horn (L).
Tighten by hand the air cap (F) on the gun body (K).
44