Download Pyronix Octagon User Guide

Transcript
8.
A number indicates a zone activation.
9.
A flashing number indicates a soak zone activation
e.g. zone 6
10.
Followed by number shows an Engineer walk test activation.
11.
A number and the tamper LED indicates a tamper zone activation.
12.
The tamper LED indicates a bell or case tamper.
13.
Indicates an entry/exit activation of the remote keypad zones.
14.
e.g. zone 8
e.g. zone 7
followed by a number shows a user omitted zone (e.g. zone 4 was omitted here during the setting
sequence).
RDOC289F Issue 7
11