Download Chapter 1 Contents

Transcript
C-size Mainframe
GPIB
PORT
GPIB
Figure 5-22. Passing Control
Run this program first in the HP 9000 Series 200/300 computer:
10
20
30
! RE-SAVE "PASSCTL2"
REAL Volts(1:10)
Create array for readings
ON INTR 7 GOTO Have_control
Set up branch on PASS CONTROL
40 ENABLE INTR 7;-32768.
Enable detection of PASS CONTROL
50 !
60 ! Wait here until control passed
70 !
80 LOOP
90
DISP "WAITING FOR CONTROL ";Count_
100 Count_=Count_+1
110 END LOOP
120 Have_control:OFF INTR 7
Deactivate interrupt
130 ASSIGN @File TO "DATA1:,700" Set up path to file
140 ASSIGN @Comp709 TO 709
Set up path to Command Module
150 ENTER @File;Volts(*)
Read data from file
160 ASSIGN @File TO *
Close data file
170 FOR I=1 TO 10
Print selected results
180 PRINT Volts(I)
190 NEXT I
200 PASS CONTROL @Comp709
Return control
210 DISP "DONE"
220 END
5-54 System Controller Mode Operation