Download SimpleBGC 32bit 3-Axis Software User Manual
Transcript
SimpleBGC SimpleBGC3.0 3.0(32bit) (32bit)bluetooth bluetoothconnection connection Regular connection: BAT USB RX TXD UART SCL SDA VCC GND GND TX RXI +5V * To upgrade firmware via Bluetooth, only 'Even' parity will work. ** Starting from firmware ver 2.41, 'None' parity is supported, too. Note, that by default, most modules configured with 'None' parity. GND +5V (RC_ROLL pin mode = SBGC Serial 2nd UART) Settings Baud rate: 115200 Parity: Even* or None** Data bits: 8 Stop bits: 1 BLUETOOTH + Optional connection: Solder jumper to provide +5V! I2C +5V Gnd Tx Rx GND YAW © 2013-2015 Basecamelectronics® PITCH ROLL 65 Bluetooth