Download NOtE - Accusys

Using the RAID GUI
Select the mail recipient(s) you want to delete and click Remove. The
selected mail recipients are deleted.
Modify Event Receivers
Select a mail recipient you want to change for its mail address and the
event severity level. Click Modify to enter the settings screen.
2.9.2 Setting up the SNMP
SNMP (Simple Network Management Protocol) is a widely used protocol
based on TCP/IP for monitoring the health of network-attached
equipments. The RAID controller is equipped with an embedded SNMP
Agent to support SNMP-based monitoring. You can use SNMP
applications (SNMP v1 or v2c-compliant) at remote computers to get
event notification by SNMP traps and watch the status of a RAID system.
Please contact your RAID system provider to get the MIB (Management
Information Base) file and import the MIB file to your SNMP manager
before enabling this feature.
Notify State: On / Off (default)
This option enables or disables the SNMP trap event notifications.
SNMP Agent State: On / Off (default)
This option enables or disables the SNMP Agent for status watching.
Port :161 (default)
Set up the port by which the SNMP Agent receives the status retrieval
commands from SNMP applications.
Community Name: public(default)
Set up the community name as the authentication string between
the SNMP Agent and SNMP applications.
Add SNMP Event Receivers Servers
You can have up to three SNMP servers to receive SNMP event
notification packets. Click Add to choose a Server ID, and set its SNMP
server address, port, and the corresponding protocol version, community
name, and severity level.
Server ID: 0 / 1 / 2
Select a server ID from the drop-down menu.
Server Address: IP Address / Domain Name
Set up the IP address or the domain name of the SNMP server.
Port : 162 (default)
2-62