Download 6KL UG - GarrettCom

Magnum 6KL Managed Edge Switch Installation and User Guide
05/12
1000BASE-SX, full-duplex, multi-mode (50μm cable) - 550m
1000BASE-LX, full-duplex, multi-mode (50, 62.5μm cable) - 550m
1000BASE-LX, full-duplex, single-mode (9μm cable) - 5km
1000BASE-ZX, full duplex, single-mode (9μm cable) - >70km
Fiber Multi-mode connector types supported:
Fiber Port, MTRJ-type (plug-in): SFF Fiber multi-mode 100BASE-FX
Fiber Port, LC-type (plug-in): SFF Fiber multi-mode 100BASE-FX
Fiber Port, SC-type (plug-in), multi-mode 100BASE-FX
Fiber Port, ST-type (twist-lock), multi-mode 100BASE-FX
Fiber Port, 1000BASE-SX, SFP modules
Fiber Single-mode connector types:
Fiber Port, LC-type, Fiber SFF single-mode, 100BASE-FX
Fiber Port, SC-type, single-mode, 100BASE-FX
Fiber Port, 1000BASE-LX, SFP modules
LEDs: Per Port (one set at the port)
(see section 5.1.1 for detailed LED configurations)
Operating Environment
Ambient Temperature:
-40° to 140° F (-40° to 60°C) for UL60950 and Component Parts rating
-40° to 195° F (-40° to 85°C) for IEC 60068 Type Test short term rating
Storage Temperature: -60°to 210°F (-50°to 100°C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft. (-60 to 4000m)
Conformal Coating (humidity protection) optional: Request quote
Alarm Relay Contacts
One NC indicating internal power, one NC software controllable
Packaging
Enclosure: High strength Cold rolled steel
Dimensions: 8.0 in H x 1.75 in W x 6.0 in D (in vertical mounting position)
20.3 cm H x 4.4 cm W x 15.2 cm D
Cooling method: Convection, fully-enclosed steel case used as a heat sink,
designed for vertical mounting, no fans
Weight: 2.1 lbs. (0.95 kg)
DC Power Supply (Internal, floating ground)
DC Power Connector: Terminal block
12VDC Power Input nominal (range 10 to 15VDC)
24VDC Power Input nominal (range 18 to 36VDC)
-48VDC Power Input nominal (range 36 to 60VDC)
Power Input for PoE:
PoE 802.3af: -48VDC Power Input (range 45 to 57VDC)
add up to 15 watts per PoE port to the base unit power draw
Power Input for PoE+:
PoE 802.3at: -48VDC Power Input (range 52 to 56VDC)
add up to 25 watts per PoE+ port to the base unit power draw
www . GarrettCom . com
2