Download User Manual - IMS B008 User Guide and Reference

Transcript
Figure 1: Top view of the IMS B008
Figure 2: Functional block diagram of the IMS B008
to or on the IMS B008. Data can be transferred to and from the link interface using programmed I/O or a DMA transfer mechanism allowing data
transfer to go on without processor intervention. On some PCs this will also
result in a faster transfer rate than can be achieved using programmed I/O.
Interrupts can be generated on link events, on error being asserted, or at
the end of a DMA transfer, freeing the processor from polling the IMS B008
to detect these events.
The TRAM slots on the IMS B008 are connected into a pipeline using two of
7