Download User Manual - DITIPMG35A

INTENDED USE
Oil preset meter can be used to dispense motor oil. With the pre-selected function, the nozzle
automatically closes the valve and stops dispensing.
TECHNICAL SPECIFICATIONS
Flow Range
0.3-9.2 GPM
Operating Pressure Range
7-1000 PSI
Operating Temperature
Max. 140°F
Accuracy
±5%
Viscosity
8-5000 mPas
5-Digital LCD Display
Quart, Pint, Gallon, Liter
(3/8"H x 3/16"W)
Inlet Connection
1/2"
Power Source
4 AA size 1.5V Batteries
*Tested with DTE-25 motor oil at ambient temperature. Min.-Max. flow range will vary with fluid
viscosity.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into this product, but
must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
•
Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
•
Do not use your meter where there is a risk of causing a fire or an explosion; e.g. in the
presence of flammable liquids, gasses, or dust. Power tools create sparks, which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating this meter. Distractions can cause you to
lose control, so visitors should remain at a safe distance from the work area.
Page 2 of 20