Download COMMUNICATION ACCESSORIES

User's Manual
Communication Accessories
The IP address can be changed in the "Network" section. After changing this, do not forget to
click on "Apply Settings".
5.2.1.2.2 Restoring the IP
The AAX004 board incorporates the Ethernet series TTL XPORT-03 manufactured by
Lantronix. If you do not know the IP address configured in the converter, you can use the
“Device Installer” software provided by Lantronix to make a MAC level search.
The „deviceinstaller‟ search on the Lantronix web returns links to the software download page.
Install and proceed as shown in the following image.
Click on „Search‟.
5.2.1.3 AAP0067
Board AAP0067 offers Ethernet to serial conversion for a single Ingecon Sun unit. It is factory
set with IP address 192.168.127.254.
5.2.1.3.1 Settings
If you want to change this address, you need to open the Internet navigator and enter
http://192.168.127.254. The following page will appear:
Ref.:
AAX2002IKI01
Rev.:
_A
Jun-2010
Page 21 of 56