Download Dataton TRAX® 3.0 Manual

Use the numeric keys to go to a slide by number. This works with all slide
projectors, but is particularly useful with fast random access slide projectors
such as the Simda and Kodak Ektapro models. First enter the desired slide
number using the numeric keys, then press NEXT to go there. Press CLEAR to
cancel the numeric entry if you make a mistake.
◆ HINT: This numeric access feature can be used to home the slide projectors
by pressing 0 and NEXT. When returned to the zero position, the lamps will
go off as well.
In order to make dissolves, AIRLINK uses all available slide projectors sequentially. Thus, if you have two slide projectors, the first slide will be in tray position one in the first projector, the second slide is in position one in the second
projector, the third is in position two in the first projector, and so on. This must
be taken into account when loading the trays, and when entering the slide
number using the numeric keys. Thus, the number entered corresponds to the
slide’s sequential position in the show – not the number of its slot in the tray
(unless you use only a single projector, of course). It also means that it isn’t
easy to add another projector to the show when you run out of tray slots. If you
must add a projector, then you must also shuffle all slides around to match the
new sequencing order.
350
Chapter 13: AIRLINK