Download PC-CDU Reference Manual

Tools Menu
Table 3-5. Receiver Options (Continued)
Option Name
Description
Values
RTK Rover (Hz)
Enables/disables the receiver to
be configured as an RTK Rover
with the desired RTK position
update rate. Measured in Hertz.
This option is obsolete and
remains for compatibility.
0, 1, 2, 5, 10, 20.
0 (zero) means the
option is disabled.
Memory (Mb)
Displays the maximum amount of
storage space for raw data files.
Measured in Mbytes.
0 – disabled
1...6256 – enabled for
specified memory space
Co-Op Tracking
Enables/disables the use of the
Co-Op tracking feature.
yes – enabled
no – disabled
1-PPS Timing
Signal
Enables/disables the receiver to
output 1 PPS signal.
0 – no 1 PPS output
1 – single 1 PPS output
2 – dual 1 PPS output
Event Markers
Enables/disables the receiver to
accept event marker inputs.
0 – no event marker
input
1 – single event marker
input
2 – dual event marker
input
In-Band Int.
Rejection
Enables/disables the receiver to
use Jamming Suppressor.
0 – disabled
1 – enabled outside
USA
2 – enabled for USA
only
Multipath
Reduction
Enables/disables the use of a
special signal processing
technique that significantly
reduces the effects of multipath.
yes – enabled
no – disabled
Frequency Input
If enabled, allows the receiver to
operate with an external highstability frequency source.
yes – enabled
no – disabled
Freq. Lock and
Output
Enables the receiver to generate a
very stable 20 MHz frequency.
yes – enabled
no – disabled
P/N 31-000004-01
3-79