Download Manual

Section 2: Description of SBE 52-MP
Data I/O
Note:
SEATERM has not been revised
to explicitly include the 52-MP.
If your 52-MP has an RS-232
interface, or using a logic level
to RS-232 converter with a
52-MP that has a logic level
interface, select the SBE 49 in
SEATERM’s Configure menu –
the SBE 49 uses the same data
bits, stop bit, and parity.
The SBE 52-MP receives setup instructions and outputs data and diagnostic
information via a 0- 3.3 volt logic level link or RS-232 interface (factory
configured). It is factory-configured for 9600 baud, 8 data bits, 1 stop bit, and
no parity.
If you want to set up a 52-MP that has been configured with the logic level
interface via an RS-232 interface (for example, via a computer RS-232 port),
you will require a converter to perform the logic level to RS-232 conversion.
Sea-Bird can supply an interface box, PN 90488.1, which provides logic
level input to RS-232 conversion. Alternatively, you can supply your
own converter.
10