Download SOLID F166 HD User Manual Engine Version

SOLID F166 HD User Manual
（3）Chargers
WARNING
Be very careful when handling these chargers since high voltage is applied
during printing process, and never touch the charger power supply.
Main charger, pre-charger, and transfer charger can be removed by
loosening thumbscrews and pulled out along the guide rail.
When replacing the main charger, loosen the thumbscrew and pull the
main charger out then replace with a new one.
Before replacing the pre-charger and transfer charger, open the waste toner
box unit. When replacing the pre-charger, loosen the thumbscrew and pull
the pre-charger out then replace with a new one.
Thumbscrew
Main charger
Pre-charger
Transfer charger
Thumbscrew
Thumbscrew
Fig. 4-46
4-27