Download Circulation Manual - Bodleian Libraries

Chapter 4 - Hold Codes
4.9
The circumstances in which you may wish to delete a hold code are very exceptional,
but if you do wish to delete one, use the following procedure;
Step 1
To access the hold codes table, type chc from any menu in the circulation module and
press <Return>.
Step 2
This will take you to a list of all existing codes. Locate the code which you wish to
delete, if necessary by selecting the Forward option and pressing <Return> until it is
visible. Then type in the line number of the code and press <Return>.
Step 3
The following screen will appear:
Fig 4.3: Hold Codes screen with delete option highlighted
Select the Delete option from the option bar and press <Return>.
Step 4
The following prompt will appear:
Are you sure that you want to delete this code? (Y/N) :
Type y and press <Return> and the list of hold codes will display. Select Exit and
press <Return> once more to go back to a circulation menu.
_____________________________________________________________________
OLIS Circulation Set Up Manual
1999