Download Plena VAS Operation Manual

Plena
5.2.5
Connection | en
67
External power amplifiers
The voice alarm router has 2 external power amplifier outputs (line level, 1 V) and 1 external
power amplifier input (100 V) to connect two external power amplifiers. The function of the
external power amplifier (e.g. a Plena Power Amplifier) depends on the channel mode for
which the system is configured (see section 1-Channel mode operation, page 77 and section
2-Channel mode operation, page 78).
See the next information about connecting external power amplifier 1 to a voice alarm router:
NC
Design
0V& Quality
0 100V 0 100V 70V 0 100V
The Netherlands
Z1
Out
0V 0 100V 0 100V 0
GND
Z5
Amplifier 2
Amplifier 1
+
1
3
GND
2
line in
GND
1
3
Z6
Z2
Z3
+24V-
Booster 2 in DC In
TRG1 TRG2
B
Failure
+
2
100V 70V
0
0
line out
Figure 5.21: Connecting external power amplifier 1
See the next information about connecting external power amplifier 2 to a voice alarm router:
Bosch Security Systems B.V.
Installation and Operation manual
2013.07 | V2.0 |