Download "user manual"

Star Auto Scanner user manual
9.
Dust may be accumulated on the LCD screen owing to the
electrostatics. Use a special LCD screen wiper to clean the screen
gently. Do not wipe the screen with bare finger.
10. Never use any chemicals to clean the screen.
11. Turn off the power if it is expected not to operate Star Auto
Scanner for a long time. It can extend the life of screen.
6.2 About software update
1. Question: Why the main unit cannot recognize the replaced CF
card?
Answer: There are two possible reasons:
① The files on the original 128MB CF card has not been fully copied.
Please delete the incomplete file(s) and copy again.
② The new CF card is not compatible with Star scanner.
Mono-functional CF card is better in such situation.
2. Question: How to make a new Star CF card when the data in old
one is lost or damaged?
Answer: In case Star CF card is damaged and the program(s) in the
card cannot be read, please follow the listed procedures to make a new
CF card:
① Purchase the same compatible CF card from the market.
② Format Star CF card.
®
③ Download the software program(s) from AUTOBOSS website.
④ Connect Star Auto Scanner and PC through with the USB cable for
software update.
61
PDF created with pdfFactory trial version www.pdffactory.com