Download Lasers for Life Sciences
Transcript
Lasers for Life Sciences 2016 Laser Overview Superior Reliability & Performance Lasers for Life Sciences Overview of Laser Applications Flow Cytometry MPE Imaging Medical Diagnostics Applications: • Flow Cytometry • Confocal Microscopy • Genomics • Proteomics • Medical Diagnostics • Environmental Monitoring Superior Reliability & Performance • www.Coherent.com • [email protected] Lasers for Life Sciences Overview of Laser Applications Confocal Microscopy Medical Instrumentation DNA Sequencing As one of the fastest growing segments for laser-based solutions, Life Sciences covers a broad range of applications from scientific research leading to medical advances, to clinical functions where lasers are used in diagnostics. Life science is important to improve our collective health and well-being, and providing the technology that is vital to the advancement of medicine is a major focus of Coherent’s life sciences strategy.* Our lasers enable advances in life science research and clinical and medical applications such as flow cytometry and cell sorting, microscopy, DNA sequencing and retina scanning. Lasers are predominantly used in these applications to excite fluorophores attached to a sample, allowing researchers and clinicians to perform a variety of important tests at both the cellular and molecular level. Lasers for these applications are as varied as the instrument devices themselves, and span the spectrum from continuouswave diode or optically pumped semiconductor lasers (OPSL) to ultrafast titanium:sapphire systems. It is our mission to enable new laser based applications taking advantage of a leadership in innovation. * We do not include medical therapeutic procedures in “Life Sciences” and have not included our portfolio of lasers for therapeutics such as high power OPSL, semiconductor or CO2 lasers in this brochure. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 1 Table of Contents Ultimate Choice. Perfect Match. Overview of Laser Applications 1 Ultimate Choice. Perfect Match. 4-11 OBIS Lasers OBIS Laser Family OBIS 12-19 OBIS FP 20-27 OBIS Galaxy 28-32 BioRay Laser Family OBIS LG 33-35 BioRay Lasers BioRay 36-38 Sapphire Laser Family BioRay FR 39-41 Sapphire Lasers Sapphire LP 42-46 Genesis Laser Family Sapphire FP 47-51 Sapphire SF Laser Accessories Femtosecond Lasers 52-54 2 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis Lasers Genesis CX STM-Series Ultimate Choice. Perfect Match. Table of Contents 55-61 Genesis CX 355 STM Compact (OEM) 62-65 Genesis CX SLM-Series 66-71 Genesis MX MTM-Series 72-80 Genesis MX STM-Series 81-88 Genesis MX SLM-Series The Most Complete Portfolio for Life Sciences 98 Laser Accessories 99 OBIS LX/LS Scientific Remote BioRay Laser Family 97 Sapphire Laser Family Femtosecond Lasers OBIS Laser Family 89-96 100-102 OBIS LX/LS Single Laser Remote 103-107 OBIS LX/LS 6-Laser Remote 108-113 OBIS LX/LS Heat Sink 114-116 OBIS LX/LS Laser Box Sapphire Driver Unit Genesis Laser Family 117-119 123 Doing Business with Coherent 127 How to Contact Us 128 Laser Accessories Laser Measurement and Control Accessories Femtosecond Lasers 120-122 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 3 Ultimate Choice. Perfect Match. Ultimate Choice. Perfect Match. With nearly 50 years of experience in life sciences, Coherent understands that getting the best results requires a laser that perfectly matches your instrument in terms of wavelength, output power, beam quality, output noise, and budget. That’s why we offer the industry’s widest choice of laser technologies and performance options. Sapphire So, whether your challenge is in cutting edge research or developing a cost-sensitive clinical instrument, you can be sure you’ll find the perfect laser for your needs in the following pages. OBIS LG Coherent offers a variety of laser platforms to allow you the freedom to choose. You have the choice, in the coming pages, to select your product by wavelength, power, features or application. Coherent makes it easy for you to optimize the laser to the work being accomplished… the perfect match for value and performance. 4 Superior Reliability & Performance • www.Coherent.com • [email protected] Ultimate Choice. Perfect Match. OBIS LX, OBIS LS BioRay Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 5 Ultimate Choice. Perfect Match. Choose Your Laser by Application Flow Cytometry: •OBIS LX, OBIS LS and Sapphire lasers for visible wavelengths (375 nm to 785 nm) •OBIS LG for 355 nm in the UV •BioRay for stable, cost-effective compact systems •Genesis CX for 355 nm in the UV, high power Medical Diagnostics: •OBIS LX, OBIS LS, Sapphire, Genesis MX, Genesis CX and OBIS LG lasers for visible wavelengths (375 nm to 785 nm) •OBIS LG for 355 nm in the UV •BioRay for stable, cost-effective compact systems Confocal Microscopy: •OBIS LX for high speed modulation •OBIS Fiber Pigtailed for Single-mode Polarization Maintaining fiber delivery •OBIS and Sapphire Fiber Pigtailed for 458 nm to 594 nm Medical Instrumentation: •OBIS LX, OBIS LS, Sapphire, Genesis MX, Genesis CX and OBIS LG lasers for visible wavelengths (375 nm to 785 nm) •OBIS LG for 355 nm in the UV •BioRay for stable, cost-effective compact systems DNA Sequencing: •Genesis MX lasers for visible wavelengths (460 nm to 639 nm) •OBIS LX for 660 nm •OBIS LS, OBIS LG or Sapphire for 532 nm Multiphoton Excitation (MPE): for MPE applications, please refer to Femtosecond Lasers from Coherent on page 115 of this Guide. 6 Superior Reliability & Performance • www.Coherent.com • [email protected] Ultimate Choice. Perfect Match. Choose Your Laser by Features Continuous-Wave (CW): BioRay, OBIS LS, OBIS LX, Sapphire, OBIS LG, Genesis CX, Genesis MX Modulation: Analog to 500 KHz BioRay Modulation: Analog to 100 KHz and/or Digital to 50 KHz OBIS LS High Speed Modulation: Analog to 500 KHz and/or Digital to 150 MHz OBIS LX Fiber Delivery: Fiber Pigtailed, Single-Mode Polarization-Maintaining Fiber OBIS LX, OBIS LS, Sapphire Fiber Connector, FC or SMA, 25 µm Core, SMA 905, 50 µm Core Genesis MX, BioRay FR Single Frequency (Longitudinal Mode) Sapphire SF, Genesis CX, Genesis MX OPSL (Optically Pumped Semiconductor Laser): Constant Beam Parameters with Power OBIS LS, Sapphire, OBIS LG, Genesis CX, Genesis MX Adjustable Beam Divergence (User Adjustable Lens) BioRay Compact Laser with common beam, common footprint, common interace, common accessories OBIS LX and OBIS LS 6-Laser Remote, either power Remote and Scientific Remote OBIS LX and OBIS LS Beam Combining with OBIS Galaxy OBIS LX with UFC Connector. Optional OBIS LS and Sapphire with UFC conversion Laser Box for 5-Laser integration with thermal management (cooling), Analog/Digital I/O and laser safety features OBIS LX and LS (frequently purchased with OBIS Galaxy) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 7 Ultimate Choice. Perfect Match. Choose Your Laser by Wavelength 355 nm 375 nm 405 nm 422 nm 445 nm 450 nm 458 nm 460 nm 473 nm 480 nm 488 nm 505 nm 514 nm 520 nm 8 355 nm OBIS LG up to 50 mW 375 nm OBIS LX up to 50 mW 405 nm OBIS LX up to 200 mW. OBIS LX Fiber Pigtailed up to 100 mW. BioRay at 50 mW. 422 nm OBIS LX at 100 mW 445 nm OBIS LX at 75 mW. OBIS LX Fiber Pigtailed at 45 mW. 450 nm BioRay at 50 mW 458 nm OBIS LX at 75 mW. OBIS LX Fiber Pigtailed at 45 mW. Sapphire up to 75 mW. Sapphire FP at 40 mW. 460 nm Genesis CX up to 1W. Genesis MX up to 2W. 473 nm OBIS LX at 75 mW. OBIS LX Fiber Pigtailed at 50 mW. 480 nm Add Genesis CX up to 2W. Genesis MX up to 2W. 488 nm OBIS LX up to 150 mW. OBIS LX Fiber Pigtailed up to 100 mW. OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW. BioRay at 20 mW. Sapphire up to 300 mW. Sapphire Fiber Pigtailed up to 200 mW. Sapphire Single Frequency up to 100 mW. Genesis CX up to 4W. Genesis MX up to 5W. 505 nm OBIS LX at 50 mW. OBIS LX Fiber Pigtailed at 40 mW. 514 nm OBIS LX at 40 mW. OBIS LX Fiber Pigtailed at 30 mW. OBIS LS at 20 mW. OBIS LS Fiber Pigtailed at 15 mW. Sapphire up to 150 mW. Sapphire Fiber Pigtailed up to 120 mW. Genesis CX up to 4W. Genesis MX up to 5W. 520 nm OBIS LX at 40 mW. BioRay at 50 mW. Superior Reliability & Performance • www.Coherent.com • [email protected] Ultimate Choice. Perfect Match. Choose Your Laser by Wavelength 532 nm OBIS LG at 3W. OBIS LS at up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW. Sapphire up to 300 mW. Sapphire Fiber Pigtailed up to 120 mW. Sapphire Single Frequency up to 150 mW. Genesis CX up to 10W. Genesis MX up to 8W. 552 nm OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW. Sapphire up to 200 mW. Sapphire Fiber Pigtailed up to 120 mW. 561 nm OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW. Sapphireup to 300 mW. Sapphire Fiber Pigtailed up to 200 mW. Genesis CX up to 3W. Genesis MX up to 2W. 568 nm Sapphire up to 200 mW 577 nm Genesis CX up to 3W. Genesis MX up to 5W. 588 nm Sapphire up to 100 mW. Sapphire Fiber Pigtailed at 40 mW. 590 nm Genesis CX up to 2W. Genesis MX up to 2W. 594 nm OBIS LS up to 100 mW. OBIS LS Fiber Pigtailed at 40 mW. Sapphire up to 75 mW. Sapphire Fiber Pigtailed at 40 mW. 607 nm Genesis MX up to 1.25W 561 nm 568 nm 577 nm 594 nm 607 nm 637 nm OBIS LX at 140 mW. OBIS LX Fiber Pigtailed at 100 mW. 639 nm Genesis MX up to 2W 640 nm OBIS LX up to 100 mW. OBIS LX Fiber Pigtailed at 75 mW. BioRay at 40 mW. 647 nm OBIS LX at 120 mW. OBIS LX Fiber Pigtailed at 100 mW. 660 nm OBIS LX at 100 mW. OBIS LX Fiber Pigtailed at 75 mW. 685 nm OBIS LX at 40 mW 730 nm OBIS LX at 30 mW 785 nm OBIS LX at 100 mW • 552 nm 588 nm 590 nm 637 nm Toll Free: (800) 527-3786 532 nm 639 nm 640 nm 647 nm 660 nm 685 nm 730 nm 785 nm Tel: (408) 764-4983 • Superior Reliability & Performance 9 Ultimate Choice. Perfect Match. Choose Your Laser by Output Power 10 OBIS LG: 20 mW to 3W BioRay: 20 mW to 50 mW OBIS LS: 20 mW to 150 mW OBIS LX: 16 mW to 200 mW OBIS FP: 15 mW to 100 mW Sapphire LP: 10 mW to 300 mW Sapphire SF: 20 mW to 150 mW Sapphire FP: 40 mW to 200 mW Superior Reliability & Performance • www.Coherent.com • [email protected] Ultimate Choice. Perfect Match. Coherent offers a variety of laser platforms to allow you the freedom to choose. The following pages provide the details of the OBIS LG, OBIS LX, OBIS LS, BioRay, Sapphire and Accessories. Coherent has made it easy for you to optimize the laser to the work being accomplished… the perfect match for value and performance. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 11 OBIS Lasers for Plug-and-Play Simplicity OBIS Features: OBIS Laser Family The Coherent OBIS suite of products offers higher signal-to-noise ratio laser technology for a wide range of applications in the Life Sciences, Environmental Monitoring, and Inspection markets. Our Optically Pumped Semiconductor Laser (OPSL) technology combined with our laser diode solutions delivers the industry-best laser reliability and performance. The OBIS family of smart lasers covers the wavelength spectrum—from the Ultraviolet at 375 nm to the near-Infrared at 785 nm. The plug-and-play flexibility allows customers to integrate the product of their choice much faster, thereby reducing their time-to-market and costs. OBIS lasers deliver superior power, low RMS noise, and higher beam quality that are key customers needs from any laser source. Coherent has implemented an intelligent design that allows multiple ways to interface with the laser, giving our customers the ability to choose the smartest operation process for their specific application requirements. OBIS LX: The OBIS LX diode lasers deliver a low astigmatism circular beam as a result of our high quality optics technology. The OBIS LX beam measurements are made at the 90/10 Clip Levels to ensure the highest mode quality. OBIS LS: OPSL technology provides the highest quality beam offering excellent circularity and beam parameters (divergence, diameter) that are constant over a wide power range. •Commonality across the spectrum in dimensions, beam and interface •Integrated control electronics •Analog, Digital and mixed modulation modes OBIS Applications: •Confocal Microscopy •DNA Sequencing •Flow Cytometry •Medical Imaging and Instrumentation OBIS lasers are now compatible with MetaMorph and µManager Software for microscopy automation and image analysis. www.Coherent.com/OBIS 12 Superior Reliability & Performance OBIS Lasers for Plug-and-Play Simplicity OBIS 375LX System Specifications Wavelength1 (nm) OBIS 405LX 375 Output Power2 (mW) M2 (Beam Quality)3 Beam Diameter at 1/e2 (mm) Beam Divergence (mrad, full-angle) Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) Pointing Stability Over Temp. (μrad/°C) RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 kHz) OBIS 445LX 445 405 413 422 100 100 75 TEM00 TEM00 TEM00 TEM00 ≤1:1.2 ≤1:1.2 ≤1:1.2 ≤1:1.2 ≤1:1.2 0.7 ±0.1 0.8 ±0.1 0.8 ±0.1 0.9 ±0.1 0.6 ±0.1 <1 <1 <1 <1.1 <1.1 <30 <30 <30 <30 <30 50 TEM00 ≤1.3 Beam Asymmetry OBIS 422LX 50, 100, 140 200, 250 16 Spatial Mode OBIS 413LX* ≤1.2 ≤1.3 ≤1.2 ≤1.2 ≤1.2 <5 <5 <5 <5 <5 ≤0.05 ≤0.05 ≤0.05 ≤0.05 ≤0.05 <0.5 <0.5 <0.5 <0.5 <0.5 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 <5 <5 Polarization Ratio Minimum 100:1, Vertical ±5° Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 75 <5 <5 >1,000,000:1 at 0 Hz, >250:1 at 75 MHz 150 <2 <2 Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 <1 <5 n/a <1 <5 n/a <1 <5 n/a <1 <5 n/a <1 <5 n/a Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) Laser Safety Classification ESD Protection Power Consumption (W) Laser Head Baseplate Temp. (Max., °C) 150 150 <2 <2 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2 3b 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 50 50 50 50 50 Heat Dissipation of Laser Head6 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 30 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. * Preliminary version. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 13 OBIS Lasers for Plug-and-Play Simplicity System Specifications Wavelength1 (nm) Output Power2 (mW) Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm) OBIS 458LX OBIS 473LX OBIS 488LX OBIS 488LS 458 473 75 75 TEM00 ≤1.2 TEM00 TEM00 TEM00 ≤1:1.2 ≤1:1.2 ≤1:1.2 ≤1:1.1 488 488 50 ≤1.2 150 20, 60, 80, 100, 150 ≤1.2 0.8 ±0.1 0.8 ±0.1 Beam Divergence (mrad, full-angle) <1.1 <1.1 <1.2 <1.2 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 <30 <30 <30 Pointing Stability Over Temp. (µrad/°C) RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 kHz) 0.8 ±0.1 0.7 ±0.1 ≤1.1 0.7 ±0.05 <5 <5 <5 <5 ≤0.05 ≤0.05 ≤0.05 ≤0.25 <0.5 <0.5 <0.5 <1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 <5 Polarization Ratio Minimum 100:1, Vertical ±5° Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) Laser Safety Classification ESD Protection Power Consumption (W) Laser Head Baseplate Temp. (Max., °C) 150 <2 <2 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2.5 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 100 <3000 <3000 >50:1 <1 <5 n/a <1 <5 n/a <1 <5 n/a <0.5 <2.5 ±200 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 50 50 50 40 Heat Dissipation of Laser Head6 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 15 to 40 -20 to 60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. 14 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS Lasers for Plug-and-Play Simplicity OBIS 505LX OBIS 514LS OBIS 514LX OBIS 520LX Wavelength1 (nm) 505 514 514 520 Output Power2 (mW) 50 20 40 40 TEM00 ≤1.2 TEM00 TEM00 TEM00 ≤1:1.2 ≤1:1.1 ≤1:1.2 ≤1:1.2 0.6 ±0.1 System Specifications Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm) ≤1.1 ≤1.2 ≤1.2 0.7 ±0.1 0.7 ±0.05 0.6 ±0.1 Beam Divergence (mrad, full-angle) <1.2 <1.2 <1.1 <1.1 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 <30 <30 <30 Pointing Stability Over Temp. (µrad/°C) RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <5 <5 <5 <5 ≤0.05 ≤0.25 ≤0.05 ≤0.05 <0.5 <1 <1 <1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 <5 Polarization Ratio Minimum 100:1, Vertical ±5° Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2.5 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 100 <3000 <3000 >50:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 <1 <5 n/a <0.5 <2.5 ±200 <1 <5 n/a <1 <5 n/a Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) Laser Safety Classification ESD Protection Power Consumption (W) 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temp. (Max., °C) 50 40 50 50 Heat Dissipation of Laser Head6 (W) Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 15 to 40 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 15 OBIS Lasers for Plug-and-Play Simplicity OBIS 532LS System Specifications Wavelength1 (nm) Output Power2 (mW) Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm) OBIS 552LS OBIS 561LS OBIS 594LS 532 552 561 594 20, 50, 80, 100, 150 20, 60, 80, 100, 150 20, 50, 80, 100, 150 20, 60, 100 TEM00 ≤1.1 TEM00 TEM00 TEM00 ≤1:1.1 ≤1:1.1 ≤1:1.1 ≤1:1.1 0.7 ±0.05 ≤1.1 ≤1.1 ≤1.1 0.7 ±0.05 0.7 ±0.05 0.7 ±0.05 Beam Divergence (mrad, full-angle) <1.2 <1.2 <1.2 <1.3 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 <30 <30 <30 Pointing Stability Over Temp. (µrad/°C) RMS Noise (%)(20 Hz to 20 MHz) <5 <5 <5 <5 ≤0.25 ≤0.25 ≤0.25 ≤0.25 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <1 <1 <1 <1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 <5 Polarization Ratio Minimum 100:1, Vertical ±5° Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 0.05 <18,000 <2000 0.05 0.05 <18,000 <18,000 <2000 <2000 Infinite at 0 Hz to 50 kHz 0.05 <18,000 <2000 Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) <0.5 <2.5 ±200 <0.5 <2.5 ±200 <0.5 <2.5 ±200 <0.5 <2.5 ±200 3b 3b 3b 3b ESD Protection Laser Safety Classification EN61326-1 EN61326-1 EN61326-1 EN61326-1 Power Consumption (W) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Laser Head Baseplate Temp. (Max., °C) 40 40 40 40 Heat Dissipation of Laser Head6 (W) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 15 to 40 -20 to 60 15 to 40 -20 to 60 15 to 40 -20 to 60 15 to 40 -20 to 60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. 16 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS Lasers for Plug-and-Play Simplicity OBIS 637LX System Specifications OBIS 640LX OBIS 647LX OBIS 660LX 660 Wavelength1 (nm) 637 640 647 Output Power2 (mW) 140 40, 100 120 100 TEM00 ≤1.2 TEM00 TEM00 TEM00 ≤1:1.2 ≤1:1.2 ≤1:1.2 ≤1:1.2 0.9 ±0.1 Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm) ≤1.2 ≤1.2 ≤1.2 0.7 ±0.1 0.8 ±0.1 0.8 ±0.1 Beam Divergence (mrad, full-angle) <1.3 <1.3 <1.3 <1.3 Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) <30 <30 <30 <30 Pointing Stability Over Temp. (μrad/°C) RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <5 <5 <5 <5 ≤0.05 ≤0.05 ≤0.05 ≤0.05 <0.5 <0.5 <0.5 <0.5 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 <5 Polarization Ratio Minimum 100:1, Vertical ±5° Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 <1 <5 n/a <1 <5 n/a <1 <5 n/a <1 <5 n/a Laser Safety Classification Power Consumption (W) 150 <2 <2 300 <1200 <800 >1,000,000:1 Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) ESD Protection 150 150 <2 <2 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temp. (Max., °C) 50 50 50 50 Heat Dissipation of Laser Head6 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 17 OBIS Lasers for Plug-and-Play Simplicity OBIS 685LX OBIS 730LX Wavelength1 (nm) 685 730 785 Output Power2 (mW) 40 30 100 TEM00 ≤1.2 TEM00 TEM00 ≤1:1.2 ≤1:1.2 ≤1:1.2 0.7 ±0.1 System Specifications Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm) OBIS 785LX ≤1.2 ≤1.2 0.8 ±0.1 0.8 ±0.1 Beam Divergence (mrad, full-angle) <1.3 <1.3 <1.7 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 <30 <30 Pointing Stability Over Temp. (µrad/°C) RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <5 <5 <5 ≤0.05 ≤0.05 ≤0.05 <0.5 <0.5 <0.5 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 Warm-up Time4 (minutes)(from cold start) <5 <5 <5 Minimum 100:1, Vertical ±5° Minimum 100:1, Vertical ±5° Minimum 100:1, Vertical ±5° Polarization Ratio Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 <1 <5 n/a <1 <5 n/a <1 <5 n/a Static Alignment Tolerances Beam Position from Reference5 (mm) Beam Angle5 (mrad) Beam Waist Position at Exit Window (mm) Laser Safety Classification ESD Protection Power Consumption (W) Laser Head Baseplate Temp. (Max., °C) 150 <2 <2 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 50 50 50 Heat Dissipation of Laser Head6 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature7 Operating Condition8 (°C) Non-operating Condition (°C) 10 to 50 -20 to 60 10 to 50 -20 to 60 10 to 50 -20 to 60 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW. 3 For LX versions the M2 measured with ModeMaster with 90/10 clip levels. 4 For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes. 5 See mechanical drawing for exit beam location. 6 Typically 85% of heat load through the base plate. See Users Manual for more detail. 7 Non-Condensing. See User Manual for more detail. 8 For LS versions laser head baseplate temperature needs to be maintained at <_40°C. 18 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS Lasers for Plug-and-Play Simplicity Utility and Environmental Requirements Operating Voltage1 (VDC) 12 ±2 Dimensions (L x W x H) Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) 70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.) 105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.) 105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.) 1 m (3.28 ft.)(3 meter and 0.3 meter sold separately) Weights Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) 0.16 kg (0.35 lbs.) 0.24 kg (0.53 lbs.) 0.36 kg (0.79 lbs.) 0.1 kg (0.22 lbs.) for 1 meter 1 If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%. Mechanical Specifications Status Indicator Top View 3 mm (0.12 in.) 64 mm (2.52 in.) 5 mm (0.2 in.) 38 mm (1.5 in.) 30 mm (1.18 in.) 70 mm (2.76 in.) 40 mm (1.57 in.) 4X Ø3.18 mm (0.13 in.) Thru OEM Label Safety Shutter Laser Exit Aperture M6 X 0.75 Thread 2.54 mm Deep 19 mm (0.75 in.) Fan Power USB Rear View 15.5 mm (0.61 in.) Rear View with OEM Label Removed Front View Toll Free: (800) 527-3786 • Tel: (408) 764-4983 SDR • Superior Reliability & Performance 19 OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform OBIS Laser Family OBIS FP Features: The OBIS Fiber Pigtailed (OBIS FP) suite of lasers delivers the simplicity of a plug-and-play platform for a wide range of wavelengths from the violet to the near IR. The fiber pigtail termination is complete with a FC/APC connector. The OBIS FP lasers are based on the OBIS laser platform, offering the same speed-to-market benefits. The OBIS FP lasers offer superior performance, reliability, and hands-free operation. These lasers combine single-mode polarization-maintaining fiber with an FC/APC connector for a high-quality low-noise laser beam output. They utilize proprietary fiber technology to provide superior lifetimes, and permanent fiber attachments for guaranteed power over time. OBIS FP lasers are also compatible with MetaMorph and μManager Software for microscopy automation and image analysis. •All OBIS advantages with fiber delivery •Single mode, polarization maintaining fiber •Extended life fiber design OBIS FP Applications: •Confocal Microscopy •DNA Sequencing •Flow Cytometry •Medical Imaging and Instrumentation www.Coherent.com/OBISFP 20 Superior Reliability & Performance OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform System Specifications Wavelength1 (nm) Output Power2 (mW) Output from Fiber Fiber Cable Type Fiber Cable Length (m)(minimum) Fiber Numerical Aperture (NA)(1/e2) Fiber Core Diameter (µm)(typical) OBIS FP 405LX OBIS FP 413LX* OBIS FP 445LX 445 405 413 50, 100 50 45 FC/APC; 8° angled7 FC/APC; 8° angled7 FC/APC; 8° angled7 3 mm Mono-Coil 3 mm Mono-Coil 3 mm Mono-Coil 1 1 1 0.055 0.055 0.055 3.5 3.5 3.5 TEM00 TEM00 TEM00 Beam Asymmetry ≤1:1.1 ≤1:1.1 ≤1:1.1 RMS Noise (%)(20 Hz to 20 MHz) Spatial Mode M2 (Beam Quality)3 ≤1.1 ≤1.1 ≤1.1 ≤0.2 ≤0.2 ≤0.2 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) ≤2 ≤2 ≤2 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 Long-term Output Power Average (%/hrs.) ≤5/1000 ≤5/1000 ≤5/1000 Warm-up Time4 (minutes)(from cold start) Polarization Ratio <5 <5 <5 Minimum 100:1 Minimum 100:1 Minimum 100:1 Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (10% to 90%)(nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification ESD Protection Power Consumption (W) Laser Head Baseplate Temperature (Max., °C) 150 <2 <2 500 <700 <700 >1,000,000:1 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 50 50 50 Heat Dissipation of Laser Head5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature6 Operating Condition (°C) Non-operating Condition (°C) 10 to 50 -20 to +60 10 to 50 -20 to +60 10 to 50 -20 to +60 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M2 measured with ModeMaster with 90/10 clip levels. 4 Typical power-on delay 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. * Preliminary version. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 21 OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform OBIS FP 473LX System Specifications OBIS FP 488LX OBIS FP 488LS Wavelength1 (nm) 473 488 Output Power2 (mW) 50 30, 100 15 40, 60, 80, 120 Output from Fiber FC/APC; 8° angled7 FC/APC; 8° angled7 FC/APC; 8° angled FC/APC; 8° angled7 Fiber Cable Type 3 mm Mono-Coil 3 mm Mono-Coil Fiber Cable Length (m)(minimum) 488 5 mm Protective Tubing 1 1 0.055 0.055 3.5 3.5 4 TEM00 TEM00 TEM00 Beam Asymmetry ≤1:1.1 ≤1:1.1 ≤1:1.1 RMS Noise (%)(20 Hz to 20 MHz) ≤0.25 Fiber Numerical Aperture (NA)(1/e2) Fiber Core Diameter (µm)(typical) Spatial Mode M2 (Beam Quality)3 ≤1.1 1 0.1 ≤1.1 0.06 ≤1.1 ≤0.2 ≤0.2 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) ≤2 ≤2 ≤1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 Long-term Output Power Average (%/hrs.) ≤4/1000 ≤4/1000 - Warm-up Time4 (minutes)(from cold start) <5 <5 <5 Minimum 100:1 Minimum 100:1 Polarization Ratio Minimum 100:1 Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 150 <2 <2.5 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (10% to 90%)(nsec) Modulation Depth (extinction ratio) 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 100 <3000 <3000 >50:1 Laser Safety Classification ESD Protection Power Consumption (W) Laser Head Baseplate Temperature (Max., °C) 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 50 50 40 Heat Dissipation of Laser Head5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 8, Max. 12 Ambient Temperature6 Operating Condition (°C) Non-operating Condition (°C) 10 to 50 -20 to +60 10 to 50 -20 to +60 15 to 40 -20 to +60 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M2 measured with ModeMaster with 90/10 clip levels. 4 Typical power-on delay 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 22 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform OBIS FP 505LX System Specifications OBIS FP 514LS OBIS FP 514LX OBIS FP 520LX 520 Wavelength1 (nm) 505 514 514 Output Power2 (mW) 50 15 30 25 Output from Fiber FC/APC; 8° angled7 FC/APC; 8° angled FC/APC; 8° angled7 FC/APC; 8° angled7 Fiber Cable Type 3 mm Mono-Coil 5 mm Protective Tubing 3 mm Mono-Coil 3 mm Mono-Coil Fiber Cable Length (m)(minimum) Fiber Numerical Aperture (NA)(1/e2) Fiber Core Diameter (µm)(typical) 1 1 1 1 0.055 0.1 0.055 0.055 3.5 4 4.5 4.5 TEM00 TEM00 TEM00 TEM00 Beam Asymmetry ≤1:1.1 ≤1:1.1 ≤1:1.1 ≤1:1.1 RMS Noise (%)(20 Hz to 20 MHz) ≤0.2 ≤0.2 _<1 ≤0.25 ≤2 ≤0.25 _<2 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Long-term Output Power Average (%/hrs.) ≤4/1000 - ≤3/1000 ≤3/1000 Spatial Mode M2 (Beam Quality)3 ≤1.1 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) Warm-up Time4 (minutes)(from cold start) Polarization Ratio ≤1.1 ≤1.1 ≤1.1 ≤2 <5 <5 <5 <5 Minimum 100:1 Minimum 100:1 Minimum 100:1 Minimum 100:1 Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 0.05 <18,000 <2000 Infinite at 0 Hz to 50 kHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz 100 <3.5 <2 >1,000,000:1 at 0 Hz, >250:1 at 100 MHz Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (10% to 90%)(nsec) Modulation Depth (extinction ratio) 500 700 700 >1,000,000:1 100 <3000 <3000 >50:1 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 Laser Safety Classification ESD Protection Power Consumption (W) 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C) 50 40 50 50 Heat Dissipation of Laser Head5 (W) Typical 5, Max. 13 Typical 8, Max. 12 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature6 Operating Condition (°C) Non-operating Condition (°C) 10 to 50 -20 to +60 15 to 40 -20 to +60 10 to 50 -20 to +60 10 to 50 -20 to +60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M2 measured with ModeMaster with 90/10 clip levels. 4 Typical power-on delay 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 23 OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform OBIS FP 532LS System Specifications Wavelength1 (nm) OBIS FP 552LS 532 Output Power2 (mW) Output from Fiber Fiber Cable Type 552 561 594 40, 60, 80, 120 15 40, 60, 80, 120 40, 60, 80, 120 40 FC/APC; 8° angled FC/APC; 8° angled7 FC/APC; 8° angled FC/APC; 8° angled7 FC/APC; 8° angled7 FC/APC; 8° angled7 5 mm Protective Tubing 5 mm Protective Tubing Fiber Cable Length (m)(minimum) Fiber Core Diameter (µm)(typical) OBIS FP 594LS 20 5 mm Protective Tubing Fiber Numerical Aperture (NA)(1/e2) OBIS FP 561LS 5 mm Protective Tubing 1 0.1 1 0.06 0.1 0.06 1 1 0.06 0.06 4 4 4 4 TEM00 ≤1.1 TEM00 TEM00 TEM00 Beam Asymmetry ≤1:1.1 ≤1:1.1 ≤1:1.1 ≤1:1.1 RMS Noise (%)(20 Hz to 20 MHz) ≤0.25 Spatial Mode M2 (Beam Quality)3 ≤1.1 ≤1.1 ≤1.1 ≤0.25 ≤0.25 ≤0.25 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) ≤1 ≤1 ≤1 ≤1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Long-term Output Power Average (%/hrs.) - - - - Warm-up Time4 (minutes)(from Cold Start) <5 <5 <5 <5 Minimum 100:1 Minimum 100:1 Minimum 100:1 Polarization Ratio Minimum 100:1 Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (10% to 90%)(nsec) Modulation Depth (extinction ratio) Laser Safety Classification 0.05 <18,000 <2000 0.05 0.05 <18,000 <18,000 <2000 <2000 Infinite at 0 Hz to 50 kHz 0.05 <18,000 <2000 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 100 <3000 <3000 >50:1 3b 3b 3b 3b ESD Protection EN61326-1 EN61326-1 EN61326-1 EN61326-1 Power Consumption (W) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 40 40 40 40 Heat Dissipation of Laser Head5 (W) Laser Head Baseplate Temperature (Max., °C) Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Typical 8, Max. 12 Ambient Temperature6 Operating Condition (°C) Non-operating Condition (°C) 15 to 40 -20 to +60 15 to 40 -20 to +60 15 to 40 -20 to +60 15 to 40 -20 to +60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M2 measured with ModeMaster with 90/10 clip levels. 4 Typical power-on delay 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. 7 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 24 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform OBIS FP 637LX OBIS FP 640LX Wavelength1 (nm) 637 Output Power2 (mW) 100 System Specifications Output from Fiber Fiber Cable Type OBIS FP 647LX OBIS FP 660LX 640 647 660 75 100 75 FC/APC; 8° angled FC/APC; 8° angled FC/APC; 8° angled FC/APC; 8° angled 3 mm Mono-Coil 3 mm Mono-Coil 3 mm Mono-Coil 3 mm Mono-Coil 1 1 1 1 0.09 0.09 0.09 0.09 Fiber Cable Length (m)(minimum) Fiber Numerical Aperture (NA)(1/e2) Fiber Core Diameter (µm)(typical) 4.5 4.5 4.5 4.5 TEM00 TEM00 ≤1.1 TEM00 ≤1.1 TEM00 Beam Asymmetry ≤1:1.1 ≤1:1.1 ≤1:1.1 ≤1:1.1 RMS Noise (%)(20 Hz to 20 MHz) Spatial Mode M2 (Beam Quality)3 ≤1.1 ≤1.1 ≤0.2 ≤0.2 ≤0.2 ≤0.2 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) ≤2 ≤2 ≤2 ≤2 Long-term Power Stability (%)(8 hrs., ±3°C) <2 <2 <2 <2 Long-term Output Power Average (%/hrs.) ≤3/1000 ≤3/1000 ≤3/1000 ≤3/1000 Warm-up Time4 (minutes)(from cold start) Polarization Ratio <5 <5 <5 <5 Minimum 100:1 Minimum 100:1 Minimum 100:1 Minimum 100:1 Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control Digital Modulation Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation Maximum Bandwidth (kHz) Rise Time (10% to 90%)(nsec) Fall Time (10% to 90%)(nsec) Modulation Depth (extinction ratio) 150 <2 <2 300 <1200 <800 >1,000,000:1 Laser Safety Classification ESD Protection Power Consumption (W) 150 150 <2 <2 <2 <2 >1,000,000:1 at 0 Hz, >250:1 at 150 MHz 500 <700 <700 >1,000,000:1 500 <700 <700 >1,000,000:1 150 <2 <2 500 <700 <700 >1,000,000:1 3b 3b 3b 3b EN61326-1 EN61326-1 EN61326-1 EN61326-1 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Laser Head Baseplate Temperature (Max., °C) 50 50 50 50 Heat Dissipation of Laser Head5 (W) Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Typical 5, Max. 13 Ambient Temperature6 Operating Condition (°C) Non-operating Condition (°C) 10 to 50 -20 to +60 10 to 50 -20 to +60 10 to 50 -20 to +60 10 to 50 -20 to +60 30 30 30 30 Shock Tolerance (g)(6 ms) 1 Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range, 520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range. 2 Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power. 3 M2 measured with ModeMaster with 90/10 clip levels. 4 Typical power-on delay 0.1 minutes. 5 Typically 85% of heat load through the base plate. See Users Manual for more detail. 6 Non-Condensing. See User Manual for more detail. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 25 OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform Utility and Environmental Requirements Operating Voltage1 (VDC) 12 ±2 Dimensions (L x W x H) Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) Fiber Minimum Bend Radius 70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.) 105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.) 105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.) 1 m (3.28 ft.)(3 meter and 0.3 meter sold separately) 51 mm (2.0 in.) Weights Laser OBIS Remote (optional) DC Power Supply (optional) Cable, Laser to OBIS Remote (optional) Fiber Tensile Load (max.) 0.23 kg (0.5 lbs.) 0.23 kg (0.5 lbs.) 0.36 kg (0.79 lbs.) 0.1 kg (0.22 lbs.) for 1 meter 1 kg (2.2 lbs.) 1 If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%. Mechanical Specifications OBIS FP LX Front View 38.1 mm (1.5 in.) Side View Rear View OEM Label 5.1 mm (0.2 in.) 40 mm (1.57 in.) 1m (minimum) (39.4 in.) 8.0° Polish Direction Axis ±4° Max. FC Connector Key FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) Angle Polished 8 ±0.5° 3 mm PVC Coated Monocoil Steel Tubing 8.0° Polarization ±2° Max. Laser Exit Aperture View of Fiber from Connector End .20 mm ±0.10 mm 4X Ø3.2 mm Thru (0.13 in.) 5 mm (0.2 in.) 30 mm (1.18 in.) Top View 3 mm (0.12 in.) 26 Superior Reliability & Performance • 64 mm (2.52 in.) www.Coherent.com • [email protected] OBIS FP Fiber Pigtailed Lasers in a Plug-and-Play Platform Mechanical Specifications OBIS FP LS Side View Front View 1.0m (minimum) (39.4 in.) Rear View 70 mm (2.76 in.) OEM Label 37.9 mm (1.49 in.) 5.1 mm (0.2 in.) 40 mm (1.57 in.) 5 mm (0.2 in.) FC Connector Key Narrow Key 8° ±0.5° Protective Tubing 5 mm (0.2 in.) Minimum Bend Radius 51 mm (2 in.) FC Connector Key View of Fiber from Connector End Laser Exit Aperture 4 mm (0.16 in.) 4X Ø3.2 mm Thru (0.13 in.) 30 mm (1.18 in.) Top View 3 mm (0.12 in.) 64 mm (2.52 in.) Looking for OBIS Galaxy Lasers? Please refer to the OBIS Galaxy data sheet and/or web page. Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS Lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIB LASER PRODUCT. 350 nm to 1100 nm <500 mW Superior Reliability & Performance ISO 9001 Registered 27 OBIS Galaxy Fiber Input, Fiber Output, Eight Channel Beam Combiner OBIS Galaxy Features: The OBIS Galaxy is equipped with eight FC fiber inputs, and can easily accept any laser using a plug-and-play integration. Each input is optimized to accept the fiber with a FC connection, and Coherent’s patented beam combining technology integrates all eight inputs. The OBIS Galaxy provides a fiber output of the combined eight lasers in a single-mode polarization-maintaining fiber, 2 meters in length, with a FC connector for any customer application. The OBIS Galaxy matches Coherent’s rigorous standards and advanced stress-testing benchmarks, offering the ease of plug-and-play integration and robustness, and providing supe¬rior performance and reliability. Fiber Output Power (mW) OBIS Laser Family OBIS Galaxy is a revolutionary design in laser technology, offering plug-and-play capabilities in laser beam combining. 400 390 380 370 360 350 340 330 320 310 300 Example of the superior performance over time of an OBIS Galaxy output power with 6 lasers inputs (405 nm, 445 nm, 488 nm, 532 nm, 561 nm, 640 nm), totaling 510 mW input power and 353 mW output power (average 69% throughput efficiency) 0 50 100 150 200 250 •Plug-and-play eight input, single output beam combiner •Compact and low profile •High transmission beam combiner with typical 60% throuput per channel OBIS Galaxy Applications: •Optogenetics •Endoscopy •Microscopy •Cytometry •Genomics 300 Operating Time (hrs) www.Coherent.com/OBISGalaxy 28 Superior Reliability & Performance OBIS Galaxy Fiber Input, Fiber Output, Eight Channel Beam Combiner System Specifications1 OBIS Galaxy Eight Input Fiber Connections2 (nm) 405 445 or 458 488 514 532 552 or 561 590 640 Power Throughput3 (%) (when used with Coherent Galaxy Compatible Lasers) for 405 nm to 590 nm for 640 nm >45, Typical >60 >55, Typical >70 Maximum Power Per Channel (mW) 100 Maximum Total Output Power (mW) <500 RMS Noise (%)(20 Hz to 2 MHz) <0.5 Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <2 Fiber Connector Type (Input Connectors) FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip Polarization Extinction Ratio Loss (%) <50 Long-term Power Throughput (%)(8 hours, ±3°C) >95 Long-term Power Throughput (average)(%) ≤2/1000 hours Output Fiber4 Fiber Connector Type5,6 (distal end) FC/APC, 8° angled, with extended-life interface Fiber Cable Type 3 mm mono-coil Fiber Cable Length (m)(minimum) 2 Fiber Numerical Aperture (NA)(1/e2) 0.055 Fiber Core Diameter (μm)(typical) 3.8 Spatial Mode TEM00 M2 (Beam Quality)7 ≤1.1 Fiber Minimum Bend Radius 51 mm (2.0 in.) Fiber Tensile Load (maximum) 1 kg (2.2 lbs.) Fiber Connector Type6 (to OBIS Galaxy) FC form-factor, ultra-flat contact FC/UFC with extended-life interface Utility and Environmental Requirements Dimensions 229 x 170 x 29 mm (9.0 x 6.7 x 1.1 in.) Weight 1.4 kg (3 lbs.) Shock Tolerance8 (g)(11 ms) 30 Vibration7 (g-RMS)(20 Hz to 2 kHz) 7.7 Ambient Temperature9 Operating Temperature Storage Temperature 10 to 50°C (50 to 122°F) -20 to 60°C (-4 to 140°F) Laser Safety Classification10 Not Applicable 1 System specifications measured at 25°C. 2 All input channels require a ±1 nm center wavelength tolerance. Required wavelength tolerances specifically: 405 nm with 404 nm to 406 nm, 445 nm with 444 nm to 446 nm, 458 nm with 457 nm to 459 nm, 488 nm with 487 nm to 489 nm, 514 nm with 513 nm to 515 nm, 532 nm with 531 nm to 533 nm, 552 nm with 551.5 nm to 553.5 nm, 561 nm with 560.5 nm to 562.5 nm, 590 nm with 587 nm to 589 nm, 640 nm with 641 nm to 643 nm. 3 The Galaxy Beam Combiner as tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures. 4 The Output Fiber may be used in reverse as an input channel to air-launch a laser into the FC/APC connector. 5 Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. 6 Recommend changing Connector Type to Fiber Connector Type such to match the description used in System Specifications section. 7 M2 measured with ModeMaster with 90/10 Clip Levels. 8 Non-Operational with a before/after change of <10%. 9 Non-Condensing. Not hermetically sealed. 10 OBIS Galaxy is not a laser and therefore the Laser Safety Classification is determined by the end-user and application. Refer to CDRH 21 CFR 1040 subchapter J or IEC 60825-1. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 29 OBIS Galaxy Fiber Input, Fiber Output, Eight Channel Beam Combiner Accessories OBIS Galaxy Output Fiber1,2 (FC/UFC to FC/APC) Part # 1254255 Part Numbers Beam Combiner, Eight Input FC/UFC, Single Output FC/APC, 405, 445, 488, 514, 532, 552, 590, 640 nm Part # 1253553 Beam Combiner, Eight Input FC/UFC, Single Output FC/APC, 405, 458, 488, 514, 532, 552, 590, 640 nm Part # 1253554 Beam Combiner, Eight Input FC/UFC, Single Output FC/APC, 405, 445, 488, 514, 532, 561, 590, 640 nm Part # 1253555 Beam Combiner, Eight Input FC/UFC, Single Output FC/APC, 405, 458, 488, 514, 532, 561, 590, 640 nm Part # 1253556 1 2 Fiber Output Connector not compatible for patchcord-to-patchcord connection. One Output Fiber included with each Galaxy Beam Combiner. The Output Fiber is installed at the factory. Mechanical Specifications for the Output Fiber (one included) Side View 2m (minimum) (78.7 in.) FC/APC Distal End - Output Polish Direction Axis ±4° Maximum 8.0° FC Connector Key FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) 3 mm PVC Coated Monocoil Tubing Polarization ±2° Max. Laser Aperture View of Fiber from Connector End FC/UFC Launch End - Input 3 mm PVC Coated Monocoil Tubing FC Connector Key Type R - Narrow Key (2.0 mm +0.02/-0.03 mm Key Width) FC Connector Key Polish Direction Not Applicable to FC/UFC Connector Polarization ±2° Max. Laser Aperture View of Fiber from Connector End 30 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS Galaxy Fiber Input, Fiber Output, Eight Channel Beam Combiner 225 mm (8.9 in.) 222.7 mm (8.8 in.) Mechanical Specifications Top View OBIS Galaxy 225 mm225 (8.9mm in.) (8.9 in.) 222.7 222.7 mm (8.8mm in.) (8.8 in.) 50 mm (2.0 in.) 25.4 mm (1.0 in.) 228.6 mm (9.0 in.) 169.6 mm (6.7 in.) 50 mm 50 mm (2.0 in.) (2.0 in.) 169.6 mm 169.6 mm 25.4 mm25.4(6.7 mm in.) (6.7 in.) (1.0 in.) (1.0 in.) OUTPUT 228.6 mm (9.0mm in.) (9.0 in.) 228.6 405 nm 445/458 nm 488 nm 640 nm 590 nm Side View 552/561 nm 532 nm OUTPUT OUTPUT 514 nm 405 nm 405 nm 445/458 nm 29.1 mm (1.1 in.) 445/458 nm 488 nm 488 nm 640 nm 640 nm 590 nm 590 nm 552/561 nm 552/561 nm 532 nm 532 nm 514 nm 514 nm Interior View1 29.1 mm29.1 (1.1mm in.) (1.1 in.) OUTPUT 405 nm 445/458 nm 488 nm 640 nm 590 nm 552/561 nm 532 nm 514 nm FC/APC 1 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • All nine internal connections are FC/UFC. Superior Reliability & Performance 31 OBIS Galaxy Fiber Input, Fiber Output, Eight Channel Beam Combiner Lasers for OBIS Galaxy All lasers same as standard product except FC connector changed to UFC type. OBIS FP LX Lasers for OBIS Galaxy Part Number OBIS 405 nm LX 50 mW Laser: Fiber Pigtail:UFC, Galaxy 1236438 OBIS 405 nm LX 100 mW Laser: Fiber Pigtail:UFC, Galaxy 1236439 OBIS 445 nm LX 45 mW Laser: Fiber Pigtail:UFC, Galaxy 1236441 OBIS 458 nm LX 45 mW Laser: Fiber Pigtail:UFC, Galaxy 1236442 OBIS 488 nm LX 30 mW Laser: Fiber Pigtail:UFC, Galaxy 1236443 OBIS 488 nm LX 100 mW Laser: Fiber Pigtail:UFC, Galaxy 1236444 OBIS 514 nm LX 30 mW Laser: Fiber Pigtail: UFC, Galaxy 1253198 OBIS 640 nm LX 75 mW Laser: Fiber Pigtail:UFC, Galaxy 1236445 OBIS FP LS Lasers for OBIS Galaxy OBIS 532 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1276599 OBIS 552 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1275619 OBIS 561 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1275608 Sapphire FP Lasers for OBIS Galaxy Sapphire 514-FP UFC OEM Laser System, 120 mW, Galaxy 1276125 Sapphire 532-FP UFC OEM Laser System, 120 mW, Galaxy 1276167 Sapphire 552-FP UFC OEM Laser System, 120 mW, Galaxy 1276186 Sapphire 561-FP UFC OEM Laser System, 120 mW, Galaxy 1276187 Sapphire 588-FP UFC OEM Laser System, 40 mW, Galaxy 1276188 OBIS FP LX Laser OBIS FP LS Laser Sapphire FP Laser VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. 350 nm to 1100 nm <500 mW 400 nm to 700 nm <10W Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS Galaxy Beam Combiners. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 32 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LG True CW, UV and Visible Lasers OBIS LG Features: The OPSL-based OBIS LG provides plug-and-play flexibility, which allows customers to integrate the product of their choice much faster, thereby reducing their time-to-market costs. These true CW lasers deliver up to 50 mW in UV and 3W in the Visible, making them ideal for applications like Flow Cytometry, Particle Counting and Microscopy. This, combined with a diffraction limited beam, low noise and high stability, provides unparalleled laser performance in the smallest package. The OBIS LG is the perfect laser platform for customers requiring high performing CW laser technology for research and instrumentation in life sciences and biological applications. •Power invariant beam quality •OBIS USB interface compatibility •Integrated control electronics OBIS Laser Family Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the OBIS LG, featuring variable output powers without changing the beam parameters. OBIS LG Applications: •Flow Cytometry •Particle Counting •DNA Sequencing •Microscopy www.Coherent.com/OBISLG Superior Reliability & Performance 33 OBIS LG True CW, UV and Visible Lasers System Specifications1 OBIS LG 355-20 OBIS LG 355-50 OBIS LG 532-3000 532 ±3 Wavelength (nm) 355 ±2 355 ±2 FWHM Linewidgh (GHz) <50 Pulse Format CW Spectral Purity (%) >99 >20 >50 Spatial Mode Output Power (mW) TEM00 <1.2 Beam Circularity2 1.0 ± 0.15 Beam Quality (M2) Beam Waist Diameter (mm)(FW, 1/e2) >3000 <1.2 Beam Waist Location3 (mm) ±325 Beam Pointing Stability (µrad/°C) <10 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, RMS)(10 Hz to 1 MHz) <0.25 Power Stability (%)(pk-pk) ±1 CDRH Compliant4 No Operating Voltage (VDC) 24 ±10% Power Consumption (W) <150 Ambient Temperature Operating Non-Operating 10 to 40°C (50 to 104°F) -10 to 60°C (-14 to 160°F) Electrical Specifications Environmental Conditions Relative Humidity5 (%) 5 to 95 CE Marking EN 61010/EN 60825/EN 61326 EN 55011/EN 5058 Dimensions (L x W x H) Laser Head6 Power Supply7 125.0 x 70.0 x 36.2 mm (4.9 x 2.76 x 1.43 in.) Cables (laser head to power supply7) 2m (6.5 ft.) 1 2 3 4 5 6 7 34 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside the laser head. Ready to be integrated in compliant system. Non-condensing. Back connector not included in laser head length dimension. Power supply not included. Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LG True CW, UV and Visible Lasers Mechanical Specifications Top View Laser Head 55.8 mm (2.2 in.) Emission Indicator Side View Rear View Output Beam 36.3 mm (1.43 in.) Status Indicators Control USB 25.9 mm (1.02 in.) Shutter Control Fan Bottom View Front View 55.0 mm (2.17 in.) 70.0 mm (2.76 in.) Mounting Holes for 3 mm or No. 4 Screws (4X) 115.0 mm (4.53 in.) 125.0 mm (4.92 in.) Heat Sink Surface Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LG lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.3 to 0.4 0.5 to 0.6 0.9 to 1.2 µm µm µm Max. Power 495 mW 1 mW 1 mW Superior Reliability & Performance ISO 9001 Registered 35 BioRay Elliptical Dot Laser BioRay Features: The BioRay provides the user with features aimed at provide the user with options for easy integration via flexible electrical including RS-232 and Analog power control, Coherent standard software interface, and focusable optics that provide direct control over the beam properties. • Self-contained power supply and drive electronics • On-board modulation, communications and self-monitoring • Closed loop independent power feedback • Low wavelength drift, down to 0.05 nm/°C at 488 • High power stability across operating temperature range •External focusability •OBIS RS-232 interface compatibility •Analog modulation BioRay Applications: •Genetic Sequencing •PCR •High Throughput Drug Screening •Hematology •Medical Diagnostics •Micro Array Scanners •Flow Cytometry BioRay OTC Power Stability BioRay OTC Power Stability (405 nm/50 mW) 405 nm to 50 mW 10 39 Measured Power Laser Temperature 5 34 29 0 24 19 -5 -10 14 0 100 200 300 Laser Temperature (°C) Percent Change (%) BioRay Laser Family The Coherent BioRay suite of products offers superior technology in bioinstrumentation lasers for applications such as DNA research, new drug development, fluid evaluation, and biological maintenance activities. Coherent laser technology delivers unparalleled performance and reliability for a wide range of emerging applications that require a cost-effective laser source in bioinstrumentation. 9 Time (minutes) www.Coherent.com/BioRay 36 Superior Reliability & Performance BioRay Elliptical Dot Laser System Specifications BioRay-405 BioRay-450 BioRay-488 BioRay-520 BioRay-640 Wavelength1 (nm) 405 450 488 520 640 Wavelength Tolerance (±nm) ±3 ±5 ±2 ±5 ±3 0.06 0.06 0.03 0.06 0.20 50 50 20 50 40 TEM00 <1.5 Wavelength Drift (nm/°C) Output Power (mW - Max. 2) Spatial Mode M2 (Beam Quality)(Average x,y3) Beam Size4 (x, y) 2.3 x 1.2 2.4 x 0.8 2.5 x 1.2 2.6 x 1.1 2.6 x 1.4 Beam Divergence4 (mrad)(x, y) 0.5 x 0.5 0.4 x 0.8 0.4 x 0.6 0.4 x 0.7 0.4 x 0.7 200 160 Pointing Stability Over Temp. (µrad/°C) <10 RMS Noise (%)(20 Hz to 20 MHz) <0.5 Peak-to-Peak Noise (%)(20 Hz to 20 MHz) <1 Long-term Power Stability (%)(8 hrs.,±3°C) <2 Warm-up Time (minutes)(from Cold Start) <15 Laser Drive Modes Analog Analog Modulation Maximum Bandwidth (KHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (%) Linear Range (VDC) 500 (Constant Power) <500 <500 100 0.5 to 5/0 to 4.5 Static Beam Alignment5 (degrees) ±5 Operating Voltage (VDC) 5 to 24 Operating Current (mA)-(Max. at 25°C) 100 160 85 Connector6 Hirose HR-10P-12S Slow Start Delay7 (µsec.) 5 Input Impedance (kOhm) 1.5 Beam Angle (mrad) <3 ESD Protection Level 4 Heat Dissipation of Laser Head (W)(Max.) 5 Ambient Temperature Operating Condition (°C) Non-operating Condition (°C) 15 to 40 -20 to 60 Shock Tolerance (g)(6 ms) 30 Mechanical Specifications Weight (g) <70 Length (mm) 95 Diameter (mm) 19.05 Material 1 2 3 4 5 6 7 Black annodized AL 6061 T1 Center Wavelength at 25°C. Delivered power. X = Fast Axis, Y = Slow Axis. Typical value. Slow axis aligned to the base plate. Flying lead for OEM configuration. If enabled. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 37 BioRay Elliptical Dot Laser Mechanical Specifications Standard Configuration Ø18.6 mm (0.73 in.) Hirose Plug Top View 16.9 mm (0.66 in.) 95.1 mm (3.74 in.) Front View 31.6 mm (1.24 in.) 1035 mm ± 25.4 (40.75 in. ±1.0) 36.3 mm (1.43 in.) Clamping Area External Focus Adjustment Locking 34.3 mm Set Screw (No. 2-56) (1.35 in.) Rear View Indicator Light Beam Exit External Focus Adjustment 19.1 mm (0.75 in.) 15.5 mm (0.61 in.) Side View 14.4 mm (0.57 in.) 13.8 mm (0.5 in.) 31.4 mm (1.24 in.) Beam Exit 40.0 mm (1.57 in.) 21.6 mm (0.9 in.) Clamping Area Ø19.05 mm (0.75 in.) Clamping Area 50.8 mm (2.0 in.) Cable LengthØ6.7 mm TYP. 2.3 mm (0.09 in.) 150 mm (5.9(0.27 in.) in.) 8.5 mm (0.33 in.) Ø18.64 mm (0.73 in.) 2X 30.0 mm (1.18 in.) 16.8 mm (0.7 in.) 4X 35.9 mm (1.41 in.) Ø19.1 mm (0.75 in.) Clamping Area 36.3 mm (1.4 in.) 4X Ø3.2 mm Clamping (0.13 in.) Area 52.9 mm (2.1 in.) Ø19.05 mm (0.75 in.) Clamping Area 2X 5.0 mm (0.2 in.) 68.2 mm (2.7 in.) 0.5 m (1.6 ft.) Indicator Light Bottom View 2X 64.0 mm (2.52 in.) 2X 3.0 mm (0.12 in.) OEM Configuration 27.2 mm (1.1 in.) 70.0 mm (2.76 in.) 2X 3.2 mm (0.13 in.) x 4.4 mm (0.18 in.) for No. 4-40 SHCS External Focus Adjustment Locking Set Screw (No. 2-56) 25.4 mm (1.0 in.) Top View External Focus Adjustment Front View 7.9 mm (0.3 in.) Rear View Ø19.05 mm (0.75 in.) Clamping Area Cable Length 150 mm (5.9 in.) Ø18.64 mm (0.73 in.) 16.8 mm (0.7 in.) 38.1 mm (1.5 in.) 21.6 mm (0.9 in.) Clamping Area 13.8 mm (0.5 in.) Beam Exit 2X No. 4-40 Side View 66.5 mm (2.6 in.) 0.5 m (1.6 ft.) 52.9 mm (2.1 in.) 31.8 mm (1.3 in.) 12.2 mm (0.5 in.) Indicator Light Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT IEC 60825-1(2007) Coherent offers a limited warranty for all BioRay lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. INVISIBLE LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT IEC 60825-1(2007) 38 Superior Reliability & Performance • www.Coherent.com ISO 9001 Registered • [email protected] BioRay FR Multimode Fiber-Ready Laser BioRay FR Features: The Coherent BioRay suite of products offers superior technology in bioinstrumentation lasers for new applications like DNA research, new drug development, fluid evaluation, and biological maintenance activities. Coherent laser technology delivers unparalleled performance and reliability for a wide range of emerging applications that require a cost-effective laser source in bioinstrumentation. •All BioRay advantages with fiber connector The Coherent BioRay Fiber-Ready (FR) provides the user with features aimed at provide the user with options for easy integration via flexible electrical including RS-232 and Analog power control, Coherent standard software interface and focusable optics that provide direct control over the beam properties. BioRay FR Applications: • Pre-aligned SMA 905 mm fiber adapter • Self-contained power supply and drive electronics • On-board modulation, communications and self-monitoring • Closed-loop independent power feedback • Low wavelength drift, down to 0.05 nm/°C at 488 • High-coupling efficacy across operating temperature range Normalized Output Power •Genetic Sequencing •PCR •High Throughput Drug Screening •Hematology •Medical Diagnostics •Micro Array Scanners •Flow Cytometry Output Power Output Variation for 488-20 and (50 Power µm Core/0.22 NA Fiber) 50 µm Core/0.22 NA Fiber During OTC 1.05 1.03 1.01 0.99 0.97 0.95 0 1 2 3 4 5 6 Time (hours) www.Coherent.com/BioRayFR Superior Reliability & Performance 39 BioRay Laser Family The Coherent BioRay FR suite of products is a stable, cost-effective line of diode lasers that include the following: •Compatible with customer provided multimode fibers BioRay FR Multimode Fiber-Ready Laser System Specifications BioRay FR-405 BioRay FR-450 BioRay FR-488 BioRay FR-520 BioRay FR-640 Wavelength1 (nm) 405 450 488 520 640 Wavelength Tolerance (±nm) ±3 ±5 ±2 ±5 ±3 0.06 0.06 0.03 0.06 0.20 200 160 Wavelength Drift (nm/°C) Spatial Mode Fiber Connector TEM00 SMA 905 <0.5 RMS Noise (%)(20 Hz to 20 MHz) Peak-to-Peak Noise (%)(20 Hz to 20 MHz) <1 Long-term Power Stability (%)(8 hrs., ±3°C) <2 Warm-up Time (minutes)(from Cold Start) <15 Laser Drive Modes Analog Analog Modulation Maximum Bandwidth (KHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (%) Linear Range (VDC) 500 (Constant Power) <500 <500 100 0.5 to 5/0 to 4.5 5 to 24 Operating Voltage (VDC) Operating Current (mA)-(Max. at 25°C) Laser Connector2 100 160 85 Hirose HR-10P-12S Slow Start Delay3 (µsec.) 5 Input Impedance (kOhm) 1.5 ESD Protection Level 4 Heat Dissipation of Laser Head (W)(Max.) 5 Ambient Temperature Operating Condition (°C) Non-operating Condition (°C) 15 to 40 -20 to 60 Shock Tolerance (g)(6 ms) 30 Mechanical Specifications Weight (g) <80 Foot Print (L x W x H) 95 x 40 x 26 mm (3.7 x 1.6 x 1.0 in.) Material 1 2 3 Black annodized AL 6061 T1 Center Wavelength at 25°C. Flying lead for OEM configuration. If enabled. Coupling Efficiencies1 Typical coupling efficiencies that can be obtained with a step index core fiber, 0.22 NA, SMA/SMA, 1 meter (Coherent part number 1278782): CE (%) = Pfiber x 100 Plaser BioRay FR-405 BioRay FR-450 BioRay FR-488 BioRay FR-520 BioRay FR-640 Wavelength (nm) 405 450 488 520 640 Output Power (mW) 50 50 20 50 40 Typical Output Power2 (ex-fiber, mW) 35 35 15 35 30 72 to 75 72 to 75 75 to 78 77 to 80 80 to 83 0.22 50 Coupling Efficiencies (%) Numerical Aperture3 (NA)(1/e2) Minimum Core Diameter (µm) 1 2 3 40 These coupling efficiencies are not guaranteed and should only be used as guidelines. Delivered power. Typical value. Superior Reliability & Performance • www.Coherent.com • [email protected] BioRay FR Multimode Fiber-Ready Laser Mechanical Specifications BioRay FR Hirose Plug Ø18.9 mm (0.75 in.) Top View 25.0 mm (0.98 in.) 103.0 mm (4.06 in.) 1035 mm ±25.4 (40.75 in. ±1.0) 36.3 mm (1.43 in.) Clamping Area Front View 39.5 mm (1.56 in.) 34.3 mm (1.35 in.) Rear View Side View Indicator Light 19.1 mm (0.75 in.) 15.5 mm (0.61 in.) 22.3 mm (0.88 in.) 31.4 mm (1.24 in.) Ø19.1 mm (0.75 in.) 40.0 mm (1.57 in.) 4X 35.9 mm (1.41 in.) 8.5 mm (0.33 in.) 50.8 mm (2.0 in.) Ø6.7 mm (0.27 in.) 2.3 mm (0.09 in.) 2X 30.0 mm (1.18 in.) 4X Ø3.2 mm (0.13 in.) 2X 3.0 mm (0.12 in.) 2X 5.0 mm (0.2 in.) BioRay FR SMA 905 Connector Bottom View 2X 64.0 mm (2.52 in.) 70.0 mm (2.76 in.) 9.812 mm (0.3863 in.) 9.779 mm (0.3850 in.) Post Polish Length 3.1725 mm (0.1249 in.) Ø 3.1648 mm (0.1246 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT IEC 60825-1(2007) Coherent offers a limited warranty for all BioRay FR lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. INVISIBLE LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT IEC 60825-1(2007) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance ISO 9001 Registered 41 Sapphire LP CW Visible Lasers from Deep Blue to Orange Sapphire LP Features: The Coherent Sapphire LP is a series of compact CW visible lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology. OPSL technology delivers established legacy wavelengths of ion and diode-pumped solid-state lasers, and its scalability allows for customized wavelengths to be developed and tailored to a specific application. •Power invariant beam quality The Sapphire LP lasers are manufactured in clean rooms using Coherent’s patented PermAlign technology to deliver optimal aligning and solder bonding of the optics. This patented technology results in an industry-best beam quality and power stability as well as the lowest noise over the complete lifetime of the laser. Sapphire LP Applications: Sapphire Laser Family The Sapphire LP lasers are provisioned with flexible interfaces including Analog, RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement. The Sapphire LP lasers deliver consistent superior performance, proven reliability, and low cost of ownership; making it the ideal laser solution for a variety of applications including life sciences, environmental protection, semiconductor inspection, and metrology. •Output power up to 300 mW •Industry-standard Sapphire footprint •Flow Cytometry •Confocal Microscopy •Genomics & Proteomics •High Throughput Drug Screening •Medical Diagnostics •Micro Array Scanning •Semiconductor Inspection •Metrology www.Coherent.com/SapphireLP 42 Superior Reliability & Performance Sapphire LP CW Visible Lasers from Deep Blue to Orange System Specifications Sapphire 458 LP Wavelength1 (nm) Output Power2 (mW) Sapphire 488 LP 458 ±2 488 ±2 20, 50, 75 10, 20, 25, 30, 40, 50, 75, 100, 150, 200, 300 Spatial Mode Beam Asymmetry TEM00, M2 <1.1 0.9 to 1.1 0.70 ±0.05 mm Beam Diameter at 1/e2 Beam Divergence (mrad) <1.2 Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%)(2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances3 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±2004 Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temp.6 +50°C (122°F) +55°C (131°F), +50°C (122°F)7 Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C ) 25 (baseplate at 55°C/50°C)7 Utility and Environmental Requirements Ambient Temperature Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.), optional 5m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable)(2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) Measurement Tools Part Number Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 1 Laser-to-laser tolerance. With residual IR emission less than 0.1 mW. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power. 3 Static alignment tolerances are relative to the right bottom edge (in beam direction). 4 200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. 5 If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With factory-provided or other adequate heat sink. 7 Sapphire 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW models are limited to a maximum baseplate temperature of +50°C (+122°F). 2 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 43 Sapphire LP CW Visible Lasers from Deep Blue to Orange System Specifications Sapphire 514 LP Wavelength1 (nm) Output Power2 (mW) Sapphire 532 LP Sapphire 552 LP 514 ±2 532 ±2 552 ±2 20, 50, 75, 100, 150 20, 50, 75, 100, 150, 200, 300 50, 75, 100, 150, 200 Spatial Mode Beam Asymmetry Beam Diameter at 1/e2 TEM00, M2 <1.1 0.9 to 1.1 0.70 ±0.05 mm Beam Divergence (mrad) <1.3 Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%)(2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances3 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±2004 Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temp.6 +50°C (122°F) Utility and Environmental Requirements Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C ) Ambient Temperature Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.), optional 5m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable)(2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) Measurement Tools Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 1 2 3 4 5 6 44 Part Number Laser-to-laser tolerance. With residual IR emission less than 0.1 mW. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power. Static alignment tolerances are relative to the right bottom edge (in beam direction). 200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Superior Reliability & Performance • www.Coherent.com • [email protected] Sapphire LP CW Visible Lasers from Deep Blue to Orange System Specifications Sapphire 561 LP Wavelength1 (nm) Output Power2 (mW) Sapphire 568 LP Sapphire 588 LP Sapphire 594 LP 561 ±2 568 ±2 588 ±2 594 ±2 20, 50, 75, 100, 150, 200, 300 50, 75, 100, 150, 200 20, 50, 75, 100 20, 50, 75 Spatial Mode Beam Asymmetry TEM00, M2 <1.1 0.9 to 1.1 0.70 ±0.05 mm Beam Diameter at 1/e2 Beam Divergence (mrad) <1.3 Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%)(2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances3 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±2004 Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temp.6 +50°C (122°F) Utility and Environmental Requirements Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C ) Ambient Temperature Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2m (6.56 ft.), optional 5m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable)(2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) Measurement Tools Part Number Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 1 2 3 4 5 6 Laser-to-laser tolerance. With residual IR emission less than 0.1 mW. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power. Static alignment tolerances are relative to the right bottom edge (in beam direction). 200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 45 Sapphire LP CW Visible Lasers from Deep Blue to Orange Mechanical Specifications Laser Head Rear View Controller Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) Beam Exit Side View 6.1 mm (0.24 in.) 6.1 mm (0.24 in.) 34 mm (1.3 in.) 66 mm (2.6 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 70 mm (2.75 in.) USB-Interface Mini USB-Type B 5 pol 5 mm (0.2 in.) 10 mm (0.4 in.) 115.6 mm (4.5 in.) 120 mm (4.7 in.) 125 mm (4.9 in.) Laser Head DSub-25 (female) Top View Top View Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 0.79 to 0.82 0.90 to 1.00 µm µm µm VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ Max. Power 150 mW 20 mW 50 mW 0.50 to 0.55 0.79 to 0.82 1.00 to 1.10 VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 0.79 to 0.82 0.90 to 1.00 VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.58 to 0.60 0.79 to 0.82 1.10 to 1.20 46 Superior Reliability & Performance µm µm µm Max. Power 480 mW 20 mW 50 mW • µm µm µm λ µm µm µm λ Max. Power 350 mW 20 mW 50 mW 0.54 to 0.57 0.79 to 0.82 1.10 to 1.20 Max. Power 480 mW 20 mW 50 mW µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ Max. Power 480 mW 20 mW 50 mW www.Coherent.com µm µm µm VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. 0.45 to 0.50 0.79 to 0.82 0.90 to 1.00 76.2 mm (3.0 in.) 117.8 mm (4.6 in.) 55 mm (2.2 in.) 112.4 mm (4.4 in.) 45 mm (1.8 in.) 7.5 mm (0.3 in.) 102.9 mm (4.0 in.) Position of Dowel Pins (Beam Registering) 6 spacers with tapped thread M4, UNC #8 or 5/32 BSW 6.35 mm 35 mm are attached (0.25 in.) (1.38 in.) max. app. 8.3 mm Analog Interface (0.327 in.) DC Power Connector 26 pin-headertype AMP latch Molex Micro Fit 3.0 10 positions Tyco 281275-1 8.8 mm (0.345 in.) Serial Interface Fuse TE5 5A 127V Littlefuse 3961500000 DSub-9 (female) 20.4 mm (0.8 in.) 62.6 mm (2.5 in.) 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 110 mm (4.3 in.) Front View 21.1 mm (0.8 in.) 15 mm (0.6 in.) 19 mm (0.75 in.) 35.3 mm (1.4 in.) DC Supply for Fan (AMP-MODU-2pin-male) 6 mm (0.24 in.) 0 mm (0.0 in.) LED (Emission Indicator) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) 5.1 mm (0.2 in.) Connection to Controller (25pin SUB-D male) 0.55 to 0.58 0.79 to 0.82 1.10 to 1.20 • µm µm µm Max. Power 480 mW 20 mW 50 mW [email protected] Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange Sapphire FP Features: The Sapphire FP lasers are manufactured in clean rooms using Coherent’s patented PermAlign™ technology to deliver optimal aligning and solder bonding of the optics. The fiber is an integral part of the resonator and is completely independent of the outer housing. Coherent’s proprietary fiber design allows operation at short wave¬lengths and/or high powers without fiber degradation or damage. As a result, Sapphire FP lasers deliver excellent output stability, lowest noise and superior polarization (PER) over a broad ambient temperature operating range (10°C to 40°C). The Sapphire FP lasers are provisioned with flexible interfaces including Analog, RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement. •All Sapphire advantages with fiber delivery •Single mode, polarization maintaining fiber •Extended life fiber design Sapphire FP Applications: •Confocal Microscopy •Flow Cytometry •Genomics & Proteomics •High Throughput Drug Screening •Medical Diagnostics •Semiconductor Inspection The Sapphire FP lasers find wide application in life sciences, metrology, and inspection where fluorescence-based techniques leverage fiber delivery to facilitate miniaturization. www.Coherent.com/SapphireFP Superior Reliability & Performance 47 Sapphire Laser Family The Coherent Sapphire FP is a series of true fiber-pigtailed lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology. OPSL technology delivers established legacy wavelengths of ion and diode- pumped solid-state lasers, and its scalability allows for customized wavelengths to be developed and tailored to a specific application. Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange System Specifications Sapphire 458 FP Wavelength1 (nm) Output Power at Fiber Exit2 (mW) Sapphire 488 FP 458 ±2 488 ±2 40 40, 80, 120, 200 SM-PM3 Fiber Type Fiber Length (m) 1 Fiber Output FC/APC; 8° angled4 Spatial Mode Beam Asymmetry TEM00, M2 <1.1 <1:1.1 Noise (%) RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25 <1 Long-term Power Stability (%)(2 hours, ±3°C) <2 Warm-up Time (min.) <5 Polarization Ratio >100:1, linear, vertical Utility and Environmental Requirements Laser Safety Classification 3b Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature6 50°C/122°F Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F -20 to 60°C/-4 to 140°F Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in. 118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in. 200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in. 171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in. 2m/6.56 ft. and options Weights Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs. 0.25 kg/0.55 lbs. 0.75 kg/1.65 lbs. 0.95 kg/2.1 lbs. incl. line cable 0.3 kg/0.66 lbs. 1 2 3 4 5 6 7 48 Laser-to-laser tolerance. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Single-mode, polarization maintaining fiber, bending radius min. 50 mm. Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Dimensions respectively weight without fiber-pigtail part. Superior Reliability & Performance • www.Coherent.com • [email protected] Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange System Specifications Sapphire 514 FP Wavelength1 (nm) Output Power at Fiber Exit2 (mW) Sapphire 532 FP Sapphire 552 FP 514 ±2 532 ±2 552 ±2 40, 80, 120 40, 80, 120 40, 80, 120 SM-PM3 Fiber Type Fiber Length (m) 1 Fiber Output FC/APC; 8° angled4 TEM00, M2 <1.1 Spatial Mode Beam Asymmetry Noise (%) RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25 <1 <2 <1:1.1 Long-term Power Stability (%)(2 hours, ±3°C) Warm-up Time (min.) <5 Polarization Ratio >100:1, linear, vertical Utility and Environmental Requirements Laser Safety Classification 3b Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature6 50°C/122°F Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F -20 to 60°C/-4 to 140°F Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in. 118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in. 200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in. 171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in. 2m/6.56 ft. and options Weights Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs. 0.25 kg/0.55 lbs. 0.75 kg/1.65 lbs. 0.95 kg/2.1 lbs. incl. line cable 0.3 kg/0.66 lbs. 1 2 3 4 5 6 7 Laser-to-laser tolerance. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Single-mode, polarization maintaining fiber, bending radius min. 50 mm. Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Dimensions respectively weight without fiber-pigtail part. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 49 Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange System Specifications Sapphire 561 FP Sapphire 588 FP Sapphire 594 FP Wavelength1 (nm) 561 ±2 588 ±2 594 ±2 40, 80, 120, 200 40 40 Fiber Type SM-PM3 Fiber Length (m) 1 Fiber Output FC/APC; 8° angled4 Output Power at Fiber Exit2 (mW) TEM00, M2 <1.1 Spatial Mode Beam Asymmetry Noise (%) RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25 <1 <2 <1:1.1 Long-term Power Stability (%)(2 hours, ±3°C) Warm-up Time (min.) <5 Polarization Ratio >100:1, linear, vertical Utility and Environmental Requirements Laser Safety Classification 3b Operating Voltage5 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature6 50°C/122°F Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F -20 to 60°C/-4 to 140°F Humidity Operating Condition Non-Operating Condition 0 to 95%, non-condensing 0 to 100%, non-condensing Shock Tolerance (11 ms) 15g laterally, 15g vertically Dimensions (L x W x H) Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in. 118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in. 200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in. 171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in. 2m/6.56 ft. and options Weights Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs. 0.25 kg/0.55 lbs. 0.75 kg/1.65 lbs. 0.95 kg/2.1 lbs. incl. line cable 0.3 kg/0.66 lbs. 1 2 3 4 5 6 7 50 Laser-to-laser tolerance. Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Single-mode, polarization maintaining fiber, bending radius min. 50 mm. Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection. If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Dimensions respectively weight without fiber-pigtail part. Superior Reliability & Performance • www.Coherent.com • [email protected] Sapphire FP Fiber Pigtailed Lasers from Deep Blue to Orange Mechanical Specifications Laser Head Controller Front View Side View Side View 6.1 mm (0.24 in.) 6.1 mm (0.24 in.) 6 mm (0.24 in.) 6 spacers with tapped thread M4, UNC #8 or 5/32 BSW 6.35 mm 35 mm are attached (0.25 in.) (1.38 in.) max. app. 8.3 mm Analog Interface (0.327 in.) DC Power Connector 26 pin-headertype AMP latch Molex Micro Fit 3.0 10 positions Tyco 281275-1 8.8 mm (0.345 in.) Serial Interface Fuse TE5 5A 127V Littlefuse 3961500000 DSub-9 (female) 19 mm (0.75 in.) 125 mm (4.92 in.) 115 mm (4.53 in.) 40.5 mm (1.59 in.) 5 mm (0.2 in.) 66 mm (2.6 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 102.9 mm (4.0 in.) 62.6 mm (2.5 in.) 21.1 mm (0.8 in.) Laser Head DSub-25 (female) 35.3 mm (1.4 in.) Top View USB-Interface Mini USB-Type B 5 pol 0 mm (0.0 in.) Ø6.2 mm (0.24 in.) 76.2 mm (3.0 in.) 112.4 mm (4.4 in.) 55 mm (2.17 in.) 70 mm (2.76 in.) 7.5 mm (0.3 in.) 20.4 mm (0.8 in.) 117.8 mm (4.6 in.) Front View 5.1 mm (0.2 in.) 34 mm (1.34 in.) 17.9 mm (0.7 in.) Top View Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 0.79 to 0.82 0.90 to 1.00 µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.50 to 0.55 0.79 to 0.82 1.00 to 1.10 µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.54 to 0.57 0.79 to 0.82 1.08 to 1.14 µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.56 to 0.58 0.79 to 0.82 1.10 to 1.16 µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.58 to 0.60 0.79 to 0.82 1.10 to 1.20 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • µm µm µm Max. Power 480 mW 20 mW 50 mW Superior Reliability & Performance 51 Sapphire SF CW Blue and Green Single-Frequency Lasers Sapphire SF Features: The Coherent Sapphire SF is a series of compact CW visible single-frequency lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology. OPSL technology delivers established legacy wavelengths of ion and diode-pumped solid-state lasers, and its scalability allows for customized wavelengths to be developed and tailored to a specific application. The Sapphire SF lasers are manufactured in clean rooms using Coherent’s patented PermAlign™ technology to deliver optimal aligning and solder bonding of the optics. This patented technology results in an industry-best beam quality and power stability as well as the lowest noise over the complete lifetime of the laser. •Ultra-low noise •Ultra-narrow linewidth Sapphire SF Applications: •Raman spectroscopy •Holography •Metrology •Inspection Sapphire SF 488 overcomes the disadvantages of ion lasers (size, power consumption, background light, cost of ownership) and diode lasers (beam quality, wavelength precision). The Sapphire SF 532 is a technologically superior alternative to Nd:YAG or Nd:YVO4 based lasers; eliminat¬ing thermal lensing and green noise effects, and power instability caused by intra cavity frequency-doubling mechanisms. The Sapphire SF lasers are intended for applications that need narrow and ultra- narrow linewidth light such as Raman spectroscopy, interferometry, holography, metrology, and inspection. 458.9 1000 400 200 440 452.1 600 0 High Resolution Raman Spectra 455.7 800 C 462.1 1200 448.6 Raman Intensity (arb. units) Sapphire Laser Family The Sapphire SF lasers are provisioned with flexible interfaces including Analog, RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement. •All Sapphire advantages with single-frequency linewidth 450 460 470 480 Wavenumber (cm-1) www.Coherent.com/SapphireSF 52 Superior Reliability & Performance Sapphire SF CW Blue and Green Single-Frequency Lasers System Specifications Sapphire 488 SF Wavelength (nm) Wavelength Accuracy (nm) Single-longitudinal Mode, Linewidth (MHz) Output Power1 (mW) 488 0.1 <1.5 20, 50, 100 Beam Diameter at 1/e2 (mm) TEM00, M2 <1.1, single longitudinal mode 0.9 to 1.1 0.70 ±0.05 Beam Divergence (mrad) <1.3 Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30 Noise (%) 20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25 <1 Long-term Power Stability (%)(2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances2 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±2003 Interfacing Analog, RS-232, USB Operating Voltage4 (VDC) +10.8 to 15 Power Consumption (W) <60 Max. Laser Head Baseplate Temp.5 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7g laterally, 15g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 117.8 x 76.2 x 43.2 mm (4.6 x 3.0 x 1.7 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 172 x 105 x 55 mm (6.8 x 4.1 x 2.2 in.) 2m (6.56 ft.), optional 5m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable)(2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) Spatial Mode Beam Asymmetry Sapphire 532 SF 532 20, 50, 100, 150 Utility and Environmental Requirements Measurement Tools Part Number Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 1 2 3 4 5 Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power. Static alignment tolerances are relative to the right bottom edge (in beam direction). 200mm is ~25% of Raleigh Range at 488 nm and ~30% of Raleigh Range at 532 nm. If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. With factory-provided or other adequate heat sink. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 53 Sapphire SF CW Blue and Green Single-Frequency Lasers Mechanical Specifications Laser Head Rear View Controller Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] [±200 mm (7.9 in.)] 17.9 mm (0.7 in.) Side View Side View 17.5 mm (0.69 in.) Beam Exit 34 mm (1.3 in.) Connection to Controller (25pin SUB-D male) LED (Emission Indicator) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) DC Supply for Fan (AMP-MODU-2pin-male) 15 mm (0.6 in.) 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 110 mm (4.3 in.) Position of Dowel Pins (Beam Registering) 45 mm (1.8 in.) 6 mm (0.24 in.) 19 mm (0.75 in.) Front View 7.5 mm (0.3 in.) 117.8 mm (4.64 in.) 14.2 mm (0.56 in.) 43.2 mm (1.7 in.) 97.8 mm (3.85 in.) 5.9 mm (0.23 in.) 66 mm (2.6 in.) 55 mm (2.2 in.) 4X M4 3.5 mm (0.14 in.) 76.2 mm (3.0 in.) 70 mm (2.75 in.) Top View 5 mm (0.2 in.) 10 mm (0.4 in.) 115.6 mm (4.5 in.) 120 mm (4.7 in.) 125 mm (4.9 in.) Top View Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.45 to 0.50 0.79 to 0.82 0.90 to 1.00 µm µm µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. λ 0.50 to 0.55 0.79 to 0.82 1.00 to 1.10 54 Superior Reliability & Performance • µm µm µm Max. Power 480 mW 20 mW 50 mW www.Coherent.com • [email protected] Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the Genesis CX-STM Series, providing up to 250 mW of UV laser light or up to 10W of visible laser light from either OEM or CDRH-compliant end-user systems. Ideal for applications such as Flow Cytometery, Particle Counting, DNA Sequencing and Microscopy, these lasers provide a TEM00 power invariant beam with low noise and high stability in a convenient package. The Genesis CX STM-Series is the perfect laser platform for customers requiring high-performing CW laser technology for research and instrumentation in life science and biological applications. Genesis CX STM-Series Features: •Single transverse mode (TEM00) •OEM or end-user versions •Air or water-cooled solutions •Power invariant beam quality Genesis CX STM-Series Applications: •Flow Cytometry •Particle Counting •DNA Sequencing Genesis Laser Family •Microscopy www.Coherent.com/GenesisCX_STM-Series Superior Reliability & Performance 55 Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Genesis CX 3551 Optical Specifications2 Wavelength (nm) 355 ±2 FWHM Linewidth (GHz) <50 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 40, 60, 80, 100, 150, 200, 250 Spatial Mode TEM00 Beam Quality (M2) Beam Circularity3 <1.2 Beam Waist Diameter (mm)(FW, 1/e2) Horizontal Vertical 1.0 ±0.1 0.975 ±0.2 0.915 ±0.2 <1.2 Beam Waist Location4 (mm) ±325 Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability5 (μrad/°C) <6 Horizontal Beam Position Tolerance (mm) ±<1.0 ±<1.0 Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 1 MHz) <0.1 Power Stability (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 5008 Ambient Temperature (°C) Operating Non-operating 10 to 40 -10 to 60 Electrical Specifications Environmental Conditions Relative Humidity6 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head7 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 56 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After warm-up over 2 hours. Non-condensing. Back connector not included in laser head length dimension. Power consumption for the CX 355-250 is 600W. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Optical Specifications2 Genesis CX 4601 Genesis CX 4801 Wavelength (nm) 460 ±3 480 ±3 FWHM Linewidth (GHz) Genesis CX 4881 Genesis CX 5141 488 ±3 514 ±3 2000, 4000 2000, 4000 <30 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 1000 Spatial Mode Beam Quality Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1000, 2000 TEM00 <1.1 1.0 ±0.1 2.25 ±10% <0.5 ±0.5 Beam Pointing Stability5 (μrad/°C) <2 Horizontal Beam Position Tolerance6 (mm) ±<1.0 Vertical Beam Position Tolerance6 (mm) ±<1.0 Beam Pointing Tolerance6 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability7 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-operating 10 to 40 -10 to 60 Environmental Conditions Relative Humidity8 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 9 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 57 Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Optical Specifications2 Wavelength (nm) Genesis CX 5321 Genesis CX 532 Genesis CX 561 Genesis CX 5771 Genesis CX 590 577 ±3 590 ±3 1000, 2000, 1000, 2000 3000 500 500 532 ±3 532 ±3 561 ±3 FWHM Linewidth (GHz) <30 Pulse Format CW Spectral Purity (%) >99 2000, 4000, 5000, 6000, 7000 8000, 10,000 3000 TEM00 <1.1 Output Power (mW) Spatial Mode Beam Quality Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1.0 ±0.1 2.25 ±10% <0.5 ±0.5 Beam Pointing Stability5 (μrad/°C) <2 Horizontal Beam Position Tolerance6 (mm) ±<1.0 Vertical Beam Position Tolerance6 (mm) ±<1.0 Beam Pointing Tolerance6 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability7 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 500 700 700 10 to 40 -10 to 60 Electrical Specifications Power Consumption (W) Environmental Conditions Ambient Temperature (°C) Operating Non-operating Relative Humidity8 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 9 58 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis CX-Series High Current OEM Power Supply Top View 208.28 mm (8.2 in.) Side View 96.52 mm (3.8 in.) Front View Rear View Bottom View 299.72 mm (11.8 in.) Genesis CX-Series Benchtop Power Supply Front View Side View 228.9 mm (9.01 in.) 361.1 mm (14.22 in.) 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 59 Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis CX STM-Series 532-10000 Power Indicator Lamp Shutter Top View Output Beam Side View Front View Rear View Ground 87.12 mm 44.75 mm (3.43 in.) (1.76 in.) 52.85 mm (2.08 in.) 9.53 mm (0.38 in.) 221.77 mm 26.97 mm (8.73 in.) (1.06 in.) 2.03 mm 280.57 mm (0.08 in.) (11.05 in.) 6.375 mm (0.251 in.) Dia. x 7.92 mm (0.31 in.) Deep Alignment Pin Hole 10.0 mm (0.39 in.) 156.06 mm (6.14 in.) 5.56 mm (0.22 in.) Control DC Power In 52.85 mm (2.08 in.) 147.32 mm (5.8 in.) 4.78 mm (0.188 in.) Dia. Mounting Screw Holes 6 Places 27.0 mm (1.06 in.) 41.28 mm (1.63 in.) 60 6.375 mm (0.251 in.) Wide x 7.92 mm (0.31 in.) Deep Alignment Pin Slot Bottom View 115.25 mm (4.54 in.) 139.73 mm (5.5 in.) 189.23 mm (7.45 in.) Superior Reliability & Performance • Cooling Surface www.Coherent.com • [email protected] Genesis CX STM-Series TEM00 UV and Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis CX STM-Series OEM and End User Laser Head – Top View 280.67 mm (11.05 in.) 4.78 mm Dia. Thru C’Bore 7.92 mm Dia. X 4.83 mm Deep (0.188 Dia. Thru C’Bore 0.312 in. Dia. X 0.19 in. Deep) (6X) 19.38 mm (0.76 in.) Laser Head – Front View Power On Indicator 137.26 mm (5.4 in.) Manual Shutter 10.0 mm (0.39 in.) 165.38 mm (6.51 in.) Laser Head – Side View Min. Bend Radius 127 mm (5.0 in.) Laser Head – Rear View 280.67 mm (11.05 in.) Control Fan Aux. Output Beam 84.51 mm (3.33 in.) 44.75 mm (1.76 in.) 11.94 mm (0.47 in.) 156.06 mm (6.14 in.) 80 mm (3.15 in.) 52.85 mm (2.08 in.) DC Power Ground Lug Laser Head – Bottom View Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep (0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep 20.65 mm (0.81 in.) 133.38 mm (5.25 in.) 144.93 mm (5.71 in.) Heatsink Surface 156.06 mm (6.14 in.) 0.0 mm (0.0 in.) 34.93 mm (1.38 in.) 182.88 mm (7.2 in.) 280.57 mm (11.05 in.) 5.56 mm (0.22 in.) 108.9 mm (4.29 in.) 6.38 +0.03/-0.00 mm Dia. X 9.7 mm Deep (0.251 +0.001/-0.00 in. Dia. X 0.38 in. Deep 47.28 mm (1.86 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. ISO 9001 Registered Coherent offers a limited warranty for all Genesis CX STM-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 61 Genesis CX 355 STM Compact (OEM) TEM00 355 nm OEM OPS Laser Systems Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology powers the Genesis CX-STM Compact, providing up to 100 mW of 355 nm laser light from an OEM system. Ideal for applications such as Flow Cytometery and Particle Counting, these lasers provide a TEM00 power invariant beam with low noise and high stability in a simple-to-integrate, air-cooled package. The Genesis CX STM Compact is the perfect laser platform for customers requiring easy integration of high-performing CW laser technology into life science and bioinstrumentation. Genesis CX 355 STM Compact (OEM) Features: •Single transverse mode (TEM00) •Reduced sized OEM •Air-cooled solution Genesis CX 355 STM Compact (OEM) Applications: •Flow Cytometry •Particle Counting Genesis Laser Family •Microscopy www.Coherent.com/GenesisCX355STM 62 Superior Reliability & Performance Genesis CX 355 STM Compact (OEM) TEM00 355 nm OEM OPS Laser Systems Genesis CX 355 Optical Specifications1 Wavelength (nm) 355 ±2 FWHM Linewidth (GHz) <50 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 40, 60, 80, 100 Spatial Mode TEM00 Beam Quality (M2) Beam Circularity2 <1.2 Beam Waist Diameter (mm)(FW, 1/e2) Horizontal Vertical 1.0 ±0.1 0.975 ±0.2 0.915 ±0.2 <1.2 Beam Waist Location3 (mm) ±325 Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability4 (μrad/°C) <6 Horizontal Beam Position Tolerance (mm) ±<1.0 ±<1.0 Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms)(10 Hz to 1 MHz) <0.1 Power Stability (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-operating 10 to 40 -10 to 60 Relative Humidity5 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head6 Cables (laser head to controller) 250.1 x 138.0 x 50.8 mm (9.84 x 5.4 x 2.0 in.) 2m (6.5 ft.) Electrical Specifications Environmental Conditions 1 2 3 4 5 6 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After warm-up over 2 hours. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 63 (4.36 in.) 234.19 mm (9.22 in.) 7.95 mm (0.31 in.) 30.15 mm 50.75 mm (1.19 in.) (2.0 in.) Genesis CX 355 STM Compact (OEM) 9.53 mm (0.375 in.) 31.75 mm (1.25 in.) TEM00 355 nm OEM OPS Laser Systems Mechanical Specifications Genesis CX Compact Controller Front View Side View RS232D SERIAL PORT MOUNTING HOLES ARE BOTH NEAR AND FARSIDE 24V IN Rear View DIODE OUT USB 2 77.65 mm (3.06 in.) 6-32 42.16 mm (1.66 in.) 18.34 mm (0.72 in.) 0 6-32 0 0 52.37 mm (2.06 in.) 68.58 mm (2.70 in.) USB 1 188.57 mm (7.42 in.) INTERLOCK 204.77 mm (8.06 in.) 0 GND 127.0 mm (5.0 in.) M3 0 M3 21.16 mm (0.833 in.) 6-32 0 .600 16.0 mm (0.63 in.) 6-32 .630 M3 M3 15.24 mm (0.60 in.) 6-32 MOUNTING HOLES (BOTTOM) 6-32 Top View 111.76 mm (4.40 in.) 0 M3 52.37 mm (2.06 in.) 111.0 mm (4.37 in.) 68.58 mm (2.70 in.) M3 188.57 mm (7.42 in.) 204.77 mm (8.06 in.) 269.85 mm (10.62 in.) 260.78 mm (10.27 in.) 111.76 mm (4.40 in.) 6-32 111.0 mm (4.37 in.) Top View 4-M4 Mounting Hole 20 ±0.5 12 Genesis CX-Series Optional AC/DC Power Supply 54 74±0.5 Rear View M4 Terminal cover Side View 25max 102 (75) (87) 12 50.5 12 (23.5) Output terminal(+ ) H V.ADJ M4 Front View 2-M4 Mounting Hole (Bottom sides) 10 7 8.6 (50) AC(L) AC(N) FG( ) Output terminal(- ) Name plate (6) (14) (15.5) (30) CN3 CN2 Name plate CN1 LED Output voltage adjustable potentiometer 28.5 64±0.5 170 6max Bottom View 42 AIR FLOW 64 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis CX 355 STM Compact (OEM) TEM00 355 nm OEM OPS Laser Systems Mechanical Specifications Genesis CX 355 STM Compact (OEM) Rear View Side View 138.33 mm (5.446 in.) 95.38 mm (3.755 in.) 287.32 mm (11.31 in.) 110.74 mm (4.36 in.) Front View OUTPUT BEAM 20.96 mm (0.825 in.) 234.19 mm (9.22 in.) 7.95 mm (0.31 in.) 30.15 mm 50.75 mm (1.19 in.) (2.0 in.) 9.53 mm (0.375 in.) 31.75 mm (1.25 in.) Top View RS232D SERIAL PORT MOUNTING HOLES ARE BOTH NEAR AND FARSIDE 24V IN DIODE OUT USB 2 77.65 mm (3.06 in.) 42.16 mm (1.66 in.) 18.34 mm (0.72 in.) 0 0 52.37 mm (2.06 in.) 68.58 mm (2.70 in.) USB 1 188.57 mm (7.42 in.) INTERLOCK 204.77 mm (8.06 in.) 0 0 6-32 GND 127.0 mm (5.0 in.) 6-32 21.16 mm (0.833 in.) M3 0 M3 6-32 0 .600 16.0 mm (0.63 in.) M3 6-32 .630 M3 15.24 mm (0.60 in.) 6-32 MOUNTING HOLES (BOTTOM) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. (4.37 in.) M3 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 68.58 mm (2.70 in.) 188.57 mm (7.42 in.) 204.77 mm (8.06 in.) 260.78 mm (10.27 in.) 269.85 mm (10.62 in.) Coherent offers a limited warranty for all Genesis CX-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. • ISO 9001 Registered 6-32 111.76 mm (4.40 in.) 0 6-32 52.37 mm (2.06 in.) mm Coherent’s scientific and industrial lasers are certified to comply with the111.76 Federal Regulations (21 CFR Subchapter as administered 111.0 J)mm M3 by the Center for Devices and Radiological Health on all systems ordered for shipment (4.40 in.) after August 2, 1976.(4.37 in.) 111.0 mm Superior Reliability & Performance 65 Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enabled by true CW lasers with low noise in the UV and visible. The Genesis CX SLM-Series provides up to 100 mW of UV laser light or up to 4W of visible laser light from either a simple, CDRH-compliant turn-key system or an easy-to-integrate air-cooled or water-cooled package. Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis CX SLM-Series features single-frequency operation for the most demanding of applications. This, combined with stable beam parameters across output powers, a diffraction limited beam, lowest noise and high stability, provides unparalleled laser performance in a convenient package. •All Genesis CX advantages with single-frequency output •OEM or end-user versions •Air or water-cooled solutions Genesis CX SLM-Series Applications: •Flow Cytometry •Particle Counting •DNA Sequencing •Microscopy Genesis Laser Family Genesis CX SLM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumentation in life science and biological applications. Genesis CX SLM-Series Features: www.Coherent.com/GenesisCX_SLM-Series 66 Superior Reliability & Performance Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Genesis CX 3551 Optical Specifications2 Wavelength (nm) FWHM Linewidth (MHz) 355 ±2 <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 40, 60, 80, 100 Spatial Mode TEM00 Beam Quality (M2) Beam Circularity3 <1.2 Beam Waist Diameter (mm)(FW, 1/e2) Horizontal Vertical 1.0 ±0.1 0.975 ±0.2 0.915 ±0.2 <1.2 Beam Waist Location4 (mm) ±325 Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability5 (μrad/°C) <6 Horizontal Beam Position Tolerance (mm) ±<1.0 ±<1.0 Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 1 MHz) <0.1 Power Stability (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-operating 10 to 40 -10 to 60 Relative Humidity6 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head7 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) Electrical Specifications Environmental Conditions 1 2 3 4 5 6 7 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After warm-up over 2 hours. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 67 Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Optical Specifications2 Genesis CX 4601 Genesis CX 4801 Genesis CX 4881 Wavelength (nm) 488 ±3 460 ±3 480 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 1000 1000 Spatial Mode Output Power (mW) Beam Quality TEM00 <1.1 Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1.0 ±0.1 2.25 ±10% <0.5 ±0.5 Beam Pointing Stability5 (μrad/°C) <2 Horizontal Beam Position Tolerance6 (mm) ±<1.0 ±<1.0 2000 Vertical Beam Position Tolerance6 (mm) Beam Pointing Tolerance6 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability7 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-operating 10 to 40 -10 to 60 Environmental Conditions Relative Humidity8 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 9 68 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Optical Specifications2 Wavelength (nm) Genesis CX 5141 Genesis CX 5321 Genesis CX 561 Genesis CX 5771 Genesis CX 590 577 ±3 590 ±3 2000 1000 514 ±3 532 ±3 561 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) 2000, 4000 2000, 4000 1000 Spatial Mode Beam Quality TEM00 <1.1 Beam Circularity3 1.0 ±0.1 2.25 ±10% <0.5 ±0.5 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) Beam Pointing Stability5 (μrad/°C) <2 Horizontal Beam Position Tolerance6 (mm) ±<1.0 Vertical Beam Position Tolerance6 (mm) ±<1.0 Beam Pointing Tolerance6 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Horizontal, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability7 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 10 to 40 -10 to 60 Environmental Conditions Ambient Temperature (°C) Operating Non-operating Relative Humidity8 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 9 Available in OEM or end user versions. Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 69 Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis CX-Series High Current OEM Power Supply Top View 208.28 mm (8.2 in.) Side View 96.52 mm (3.8 in.) Front View Rear View Bottom View 299.72 mm (11.8 in.) Genesis CX-Series Benchtop Power Supply Front View Side View 228.9 mm (9.01 in.) 361.1 mm (14.22 in.) 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) 70 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis CX SLM-Series OEM and End User Top View 4.78 mm Dia. Thru C’Bore 7.92 mm Dia. X 4.83 mm Deep (0.188 Dia. Thru C’Bore 0.312 in. Dia. X 0.19 in. Deep) (6X) 19.38 mm (0.76 in.) Rear View Control 10.0 mm (0.39 in.) 165.38 mm (6.51 in.) Front View Power On Indicator Side View Fan Aux. 137.26 mm (5.4 in.) Manual Shutter Output Beam 84.51 mm (3.33 in.) 44.75 mm (1.76 in.) 11.94 mm (0.47 in.) Ground Lug Bottom View Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep (0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep 133.38 mm (5.25 in.) 144.93 mm (5.71 in.) 156.06 mm (6.14 in.) 52.85 mm (2.08 in.) Heatsink Surface 20.65 mm (0.81 in.) DC Power 6.38 +0.03/-0.00 mm Dia. X 9.7 mm Deep (0.251 +0.001/-0.00 in. Dia. X 0.38 in. Deep 156.06 mm (6.14 in.) 0.0 mm (0.0 in.) 34.93 mm (1.38 in.) 108.9 mm (4.29 in.) 182.88 mm (7.2 in.) 5.56 mm (0.22 in.) 280.57 mm (11.05 in.) 47.28 mm (1.86 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. ISO 9001 Registered Coherent offers a limited warranty for all Genesis CX SLM-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 71 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Applications like Ophthalmology, Microscopy and Photocoagulation are enable by low noise, visible and infrared true CW lasers. The Genesis MX MTM-Series provides up to 8W of visible laser light or 10W of infrared laser light from either OEM or CDRH-compliant end-user systems. Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis MX MTM-Series features variable output power without changing the beam parameters. This, combined with low noise and high stability, provides unparalleled laser performance in a convenient package. •Multitransverse mode •OEM or end-user versions •Air- or water-cooled solutions Genesis MX MTM-Series Applications: •Ophthalmology •Microscopy •Photocoagulation Genesis Laser Family Genesis MX MTM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumentation in medical and therapeutic applications. Genesis MX MTM-Series Features: Genesis MX MTM-Series OEM version www.Coherent.com/GenesisMX_MTM-Series 72 Superior Reliability & Performance Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Optical Specifications1 Genesis MX 460 Genesis MX 480 Genesis MX 488 Genesis MX 514 Genesis MX 532 Wavelength (nm) 460 ±3 480 ±3 488 ±3 14 ±3 532 ±3 CW 3000, 5000 3000, 5000, 8000 Pulse Format Spectral Purity (%) Output Power (mW) >99 1000, 2000 2000 3000, 5000 Multimode <7 <7 Spatial Mode Beam Quality9 (M2) Horizontal Vertical Beam Circularity2,9,10 Beam Waist Diameter9,10 (mm)(FW, 1/e2) Beam Divergence9,10 (mrad)(FW, 1/e2) 1.25 1.4 1.6 1.6 1.8 1.8 1.3 1.5 1.5 <1.4 <1.4 0.25 ±0.25 Beam Waist Location3,9,10 (nm) Beam Pointing Stability4,9 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 ±<1.0 Vertical Beam Position Tolerance5 (mm) Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1 <10 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 10 to 40 water-cooled, 10 to 35 air-cooled -10 to 60 Environmental Conditions Ambient Temperature (°C) Operating Non-Operating Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. 3 Negative value corresponds to a location inside head. 4 After 2-hour warm-up. 5 Measured at the output window. 6 Measured over 8 hrs. 7 Non-condensing. 8 Back connector not included in laser head length dimension. 9 Contact Coherent for any specific application requirements. 10 Typical value. 2 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 73 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Optical Specifications1 Wavelength (nm) Pulse Format Spectral Purity (%) Output Power (mW) Genesis MX 561 Genesis MX 577 Genesis MX 590 561 ±3 577 ±3 590 ±3 CW >99 2000 3000, 5000 <7 <7 1.25 1000, 2000 Spatial Mode Multimode Beam Quality9 (M2) Horizontal Vertical Beam Circularity2,9,10 Beam Waist Diameter9,10 (mm)(FW, 1/e2) 1.8 <1.4 Beam Waist Location3,9,10 (nm) 0.25 ±0.25 Beam Pointing Stability4,9 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 Vertical Beam Position Tolerance5 (mm) ±<1.0 Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Beam Divergence9,10 (mrad)(FW, 1/e2) Noise 10 Hz to 10 MHz (%, rms) <1 10 Hz to 5 kHz (%, peak-to-peak) <10 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-Operating 10 to 40 water-cooled, 10 to 35 air-cooled -10 to 60 Environmental Conditions Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. 3 Negative value corresponds to a location inside head. 4 After 2-hour warm-up. 5 Measured at the output window. 6 Measured over 8 hrs. 7 Non-condensing. 8 Back connector not included in laser head length dimension. 9 Contact Coherent for any specific application requirements. 10 Typical value. 2 74 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Optical Specifications1 Genesis MX 920 Genesis MX 1064 Genesis MX 1154 Wavelength (nm) 920 ±10 1064 ±10 1154 ±15 4000 10,000 6000 Spatial Mode Multimode Output Power (mW) Bandwidth (nm) <5.0 Beam Waist Dimensions (mm) Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) 0.6 0.6 -150 Beam Divergence Horizontal4 (FW, 1/e2, mrad) Vertical4 (FW, 1/e2, mrad) 3.5 3.5 <2 <2 Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 100 kHz (%, peak-to-peak) <0.5 <10 Polarization Ratio Vertical, >100:1 Operating Diode Current (A) <30 <38 <32 Maximum Diode Current (A) <36 <45 <38.5 M2 Horizontal Vertical Utility and Environmental Requirements Diode Voltage (V) 1.5 to 2.2 Cooling Requirements5 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head5 256 x 49 x 71 mm (10.07 x 1.93 x 2.76 in.) Weight Laser Head (g) 730 ±10 1 2 3 4 5 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Typical value. Measured from the output face, negative value corresponds to a location inside the head; positive outside. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Contact integration support for options on air-cooling TEC or waterplate. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 75 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Optical Specifications1 Wavelength (nm) Genesis MX 460 OEM Genesis MX 480 OEM Genesis MX 488 OEM Genesis MX 514 OEM Genesis MX 532 OEM 460 ±3 480 ±3 488 ±3 514 ±3 532 ±3 1000, 2000 2000 3000, 5000 3000, 5000 3000, 5000, 8000 Spatial Mode Multimode Bandwidth (nm) <0.5 Beam Waist Dimensions (mm) Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) 0.14 0.11 0.17 0.13 0.17 0.16 -60 0.17 0.13 0.17 0.13 Beam Divergence Horizontal2 (FW, 1/e2, mrad) Vertical2 (FW, 1/e2, mrad) <18 <16 <20 <20 <20 <20 <20 <20 <20 <20 Collimated Version Beam Waist Diameter2 (1/e2, mm) Beam Divergence2 (1/e2, mrad) Beam Waist Location2 (m) 1.4 1.3 1.6 1.5 1.6 1.5 0.25 ±0.25 1.8 1.4 1.8 1.4 <7 <7 Output Power (mW) M2 Horizontal Vertical Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1 <10 Polarization Ratio Horizontal, >100:1 Direct Modulation5 Available Utility and Environmental Requirements Operating Diode Current (A) <22.5, <27 <27 <30, <33 <3o, <33 <3o, <33, <38 Maximum Diode Current (A) <27, <32 <32 <36, <40 <36, <40 <36, <40, <45 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements6 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 1 2 3 4 5 6 76 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Typical value. Measured from the output face, negative value corresponds to a location inside the head; positive outside. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Genesis MX 561 OEM Optical Specifications1 Genesis MX 577 OEM Genesis MX 590 OEM Wavelength (nm) 561 ±3 577 ±3 590 ±3 Output Power (mW) 2000 3000, 5000 1000, 2000 Spatial Mode Multimode Bandwidth (nm) <0.5 0.17 0.13 0.13 -60 Beam Divergence Horizontal2 (FW, 1/e2, mrad) Vertical2 (FW, 1/e2, mrad) <20 <20 Collimated Version Beam Waist Diameter2 (1/e2, mm) Beam Divergence2 (1/e2, mrad) Beam Waist Location2 (m) 1.8 1.4 0.25 ±0.25 <7 <7 Beam Waist Dimensions (mm) Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) M2 Horizontal Vertical Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1 <10 Polarization Ratio Horizontal, >100:1 Direct Modulation5 Available 0.13 Utility and Environmental Requirements Operating Diode Current (A) <33 <30, <33 <30, <32 Maximum Diode Current (A) <40 <36, <40 <36, <38 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements6 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 1 2 3 4 5 6 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Typical value. Measured from the output face, negative value corresponds to a location inside the head; positive outside. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 77 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX MTM-Series (End-User) Air-cooled version Side View 119.08 mm (4.69 in.) 67.34 mm (2.65 in.) 61.6 mm (2.43 in.) 246.08 mm (9.69 in.) 68.2 mm (2.69 in.) 95.25 mm (3.75 in.) 47.63 mm (1.88 in.) Rear View 76.56 mm (3.01 in.) 59.56 mm (2.34 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep 205.56 mm (8.09 in.) 265.13 mm (10.44 in.) 10.41 mm (0.41 in.) 188.56 mm (7.42 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep 10.0 mm (0.39 in.) 10-32 61.6 mm (2.43 in.) 65.0 mm (2.56 in.) Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) 10-32 M5 M5 M5 M5 Mounting Holes 10-32 X 0.38 in. Deep (4X) 45.0 mm (1.77 in.) 10-32 10-32 Top View Genesis MX MTM-Series (End-User) Water-cooled version Side View 119.08 mm (4.69 in.) 21.29 mm (0.84 in.) 61.6 mm (2.43 in.) 246.08 mm (9.69 in.) 68.2 mm (2.69 in.) 95.25 mm (3.75 in.) 47.63 mm (1.88 in.) 265.13 mm (10.44 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep Rear View 205.56 mm (8.09 in.) 76.56 mm (3.01 in.) 59.56 mm (2.34 in.) 10.41 mm (0.41 in.) 188.56 mm (7.42 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep 10.0 mm (0.39 in.) 10-32 10-32 M5 61.6 mm (2.43 in.) 65.0 mm (2.56 in.) M5 45.0 mm (1.77 in.) 10-32 M5 M5 Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) Mounting Holes 10-32 X 0.38 in. Deep (4X) 10-32 Top View 78 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX MTM-Series (OEM) Top View 44 mm (1.73 in.) Front View 22 mm (0.87 in.) 29.78 mm (1.17 in.) 111.1 mm (4.37 in.) 4.78 mm (0.19 in.) 19.05 mm (0.75 in.) 9.53 mm (0.375 in.) 4-40 UNC-2B X 0.25 Deep Tapped Holes (4X) Window 19.05 mm (0.75 in.) 50.39 mm (1.98 in.) 9.53 mm (0.375 in.) 4-40 UNC-2B X 0.20 Deep (2X) 120.65 mm (4.75 in.) Rear View 7.9 mm (0.31 in.) Ø15.88 mm (0.625 in.) 2° 3.13 mm (0.12 in.) 64.47 mm (2.54 in.) 13.51 mm (0.53 in.) 27.94 mm (1.1 in.) Side View 13.49 mm (0.53 in.) 5.08 mm (0.2 in.) Base Plate Requirements This surface must be flat within 0.001 in. and have 32 µm finish or better within TEC mounting areas. 5.46 mm (0.22 in.) 53.59 mm (2.11 in.) 12.95 mm (0.51 in.) 18.8 mm (0.74 in.) 15.24 mm (0.6 in.) 18.8 mm (0.74 in.) 86.87 mm (3.42 in.) 89.92 mm (3.54 in.) 112.78 mm (4.44 in.) 0.125 Dia. Dowel Pin (2X) Genesis MX MTM-Series Benchtop Power Supply Spacer Detail 1.52 mm (0.06 in.) 12.7 mm (0.5 in.) 8-32 UNC-2B X 0.50 Deep (4X) 6.35 mm (0.25 in.) 6.35 mm (0.25 in.) 45.21 mm (1.78 in.) 24.89 mm (0.98 in.) 0.188 Dia. Thru (2X) 4.06 mm (0.16 in.) 3.175 mm (0.125 in.) 112.78 mm (4.44 in.) 120.65 mm (4.75 in.) 6.35 mm (0.25 in.) Clamping Bar Detail 11.43 mm (0.45 in.) 6.1 mm (0.24 in.) 16.26 mm (0.64 in.) 5.08 mm (0.2 in.) Front View Side View 228.9 mm (9.01 in.) 361.1 mm (14.22 in.) 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 79 Genesis MX MTM-Series Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX MTM-Series OEM Benchtop Power Supply Top View 208.28 mm (8.2 in.) Side View 96.52 mm (3.8 in.) Front View Rear View Bottom View 299.72 mm (11.8 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. ISO 9001 Registered Coherent offers a limited warranty for all Genesis MX MTM-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 80 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers. The Genesis MX STM-Series provides up to 1W of visible laser light from either OEM or CDRH- compliant end-user systems. Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis MX STM-Series features variable output power without changing the beam parameters. This, combined with a diffraction-limited beam, low noise and high stability, provides unparalleled laser performance in a convenient package. •Single transverse mode (TEM00) •OEM or end-user versions •Air- or water-cooled solutions Genesis MX STM-Series Applications: •Flow Cytometry •Particle Counting •DNA Sequencing •Microscopy Genesis Laser Family Genesis MX STM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumentation in life science and biological applications. Genesis MX STM-Series Features: Genesis MX STM-Series OEM version www.Coherent.com/GenesisMX_STM-Series Superior Reliability & Performance 81 Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Optical Specifications1 Genesis MX 460 Genesis MX 480 Genesis MX 488 Wavelength (nm) 488 ±3 460 ±3 480 ±3 FWHM Linewidth (GHz) <30 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) Spatial Mode Beam Quality (M2) 500 500 TEM00 Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) 500, 1000 <1.1 1.0 ±0.1 1.0 ±0.1 0.7 ±0.1 ±0.25 Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 Vertical Beam Position Tolerance5 (mm) ±<1.0 Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-Operating 10 to 40 -10 to 60 Environmental Conditions Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 82 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Optical Specifications1 Genesis MX 514 Genesis MX 532 514 ±3 532 ±3 Wavelength (nm) FWHM Linewidth (GHz) Pulse Format CW Spectral Purity (%) >99 Output Power (W) 500, 1000 500, 1000 TEM00 Spatial Mode Beam Quality (M2) Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Genesis MX 561 Genesis MX 577 561 ±3 577 ±3 500 500, 1000 <30 <1.1 1.0 ±0.1 1.0 ±0.1 0.7 ±0.1 ±0.25 Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 Vertical Beam Position Tolerance5 (mm) ±<1.0 Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 10 to 40 -10 to 60 Environmental Conditions Ambient Temperature (°C) Operating Non-Operating Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 83 Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Optical Specifications1 Wavelength (nm) Output Power (mW) Genesis MX 460 OEM Genesis MX 480 OEM 460 ±3 480 ±3 488 ±3 500 500 500, 1000 TEM00 <30 Spatial Mode FWHM Linewidth (GHz) Pulse Format CW Beam Circularity 1.0 ±0.1 Beam Position Tolerance (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1 0.7 ±0.1 ±0.25 <1.1 <1.1 Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1 <1 Horizontal, >100:1 Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2 Horizontal Vertical Genesis MX 488 OEM Polarization Ratio CDRH Compliance No Warm-up Time (minutes) <10 Direct Modulation6 Available Operating Diode Current (A) <10 <10 <10, <12 Maximum Diode Current (A) <12 <12 <12, <15 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements7 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 Utility and Environmental Requirements 1 2 3 4 5 6 7 84 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Measured at the output of the laser head. Negative value corresponds to a location within the head. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Over 8 hours. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Genesis MX 514 OEM Optical Specifications1 Wavelength (nm) Genesis MX 532 OEM Genesis MX 561 OEM Genesis MX 577 OEM 514 ±3 532 ±3 561 ±3 577 ±3 500, 1000 500, 1000 500 500, 1000 Spatial Mode FWHM Linewidth (GHz) TEM00 <30 Output Power (mW) Pulse Format CW Beam Circularity 1.0 ±0.1 Beam Position Tolerance (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1 0.7 ±0.1 ±0.25 <1.1 <1.1 Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1 <1 Horizontal, >100:1 Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2 Horizontal Vertical Polarization Ratio CDRH Compliance No Warm-up Time (minutes) <10 Direct Modulation6 Available <10 Utility and Environmental Requirements Operating Diode Current (A) Maximum Diode Current (A) <12 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements7 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 1 2 3 4 5 6 7 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Measured at the output of the laser head. Negative value corresponds to a location within the head. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Over 8 hours. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 85 Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX STM-Series Air-cooled version 67.26 mm (2.65 in.) Side View 200.86 mm (7.91 in.) 78.74 mm (3.1 in.) 61.6 mm (2.43 in.) 68.2 mm (2.69 in.) 89.22 mm (3.51 in.) 47.64 mm (1.88 in.) 10.41 mm (0.41 in.) Rear View 10.0 mm (0.39 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep 182.96 mm (7.20 in.) 53.96 mm (2.12 in.) 36.96 mm (1.45 in.) 219.91 mm (8.66 in.) 165.96 mm (6.53 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) 10-32 10-32 61.6 mm (2.43 in.) 55.0 mm (2.17 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep M5 M5 M5 M5 Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) 45.0 mm (1.77 in.) 10-32 Mounting Holes 10-32 X 0.38 in. Deep (4X) 10-32 Top View Genesis MX STM-Series Water-cooled version Side View 78.74 mm (3.1 in.) 200.86 mm (7.91 in.) 61.6 mm (2.43 in.) 21.29 mm (0.84 in.) 68.2 mm (2.69 in.) 89.22 mm (3.51 in.) 47.64 mm (1.88 in.) 10.41 mm (0.41 in.) Rear View 10.0 mm (0.39 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep 182.96 mm (7.20 in.) 53.96 mm (2.12 in.) 36.96 mm (1.45 in.) 219.91 mm (8.66 in.) 165.96 mm (6.53 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) 10-32 10-32 61.6 mm (2.43 in.) 55.0 mm (2.17 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep M5 M5 M5 M5 Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) 45.0 mm (1.77 in.) 10-32 10-32 Mounting Holes 10-32 X 0.38 in. Deep (4X) Top View 86 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX STM-Series High-Power Optically Pumped Semiconductor Lasers (OPSL) Mechanical Specifications Genesis MX STM-Series Water-cooled version Top View 111.1 mm (4.37 in.) 61 mm (2.4 in.) 34.55 mm (1.36 in.) 4.78 mm (0.19 in.) 34 mm (1.34 in.) 17 mm (0.67 in.) Mounting Holes M3 X 12.2 mm (0.48 in.) Deep (4X) Front View 3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) DIA X 5.08 mm (0.20 in.) Deep 29.78 mm (1.17 in.) 28.15 mm (1.11 in.) Slot 3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) Wide X 2.03 mm (0.08 in.) Long X 5.08 mm (0.20 in.) Deep 44 mm (1.73 in.) 120.65 mm (4.75 in.) 26 mm (1.02 in.) 22 mm (0.87 in.) Rear View Side View Base Plate Requirements 5.08 mm (0.2 in.) This surface must be flat within 0.001 in. and have 32 µm finish or better within TEC mounting areas. 5.46 mm (0.22 in.) 53.59 mm (2.11 in.) 12.7 mm (0.5 in.) 1.52 mm (0.06 in.) 18.8 mm (0.74 in.) 15.24 mm (0.6 in.) 18.8 mm (0.74 in.) 86.87 mm (3.42 in.) 8-32 UNC-2B X 0.50 Deep (4X) 89.92 mm (3.54 in.) 112.78 mm (4.44 in.) 0.125 Dia. Dowel Pin (2X) Genesis MX STM-Series Benchtop Power Supply 6.35 mm (0.25 in.) 12.95 mm (0.51 in.) Spacer Detail 6.35 mm (0.25 in.) 45.21 mm (1.78 in.) 24.89 mm (0.98 in.) 0.188 Dia. Thru (2X) 4.06 mm (0.16 in.) 3.175 mm (0.125 in.) 112.78 mm (4.44 in.) 120.65 mm (4.75 in.) 6.35 mm (0.25 in.) Clamping Bar Detail 11.43 mm (0.45 in.) 6.1 mm (0.24 in.) 16.26 mm (0.64 in.) 5.08 mm (0.2 in.) Front View Side View 228.9 mm (9.01 in.) 361.1 mm (14.22 in.) 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 87 Genesis MX STM-Series High-Power Optically Pumped Semiconductor Lasers (OPSL) Mechanical Specifications Genesis MX STM-Series Low Current OEM Controller Laser Control Interlock 6-32 Side View M3 68.58 mm (2.70 in.) 52.37 mm (2.06 in.) 24V In 188.57 mm (7.42 in.) USB 204.77 mm (8.06 in.) RS-232D Serial Port Top View M3 Diode Out Bottom View 16.0 mm (0.63 in.) M3 M3 6-32 16.0 mm (0.63 in.) M3 6-32 111.0 mm (4.37 in.) M3 127 mm (5.0 in.) Rear View 111.76 mm (4.4 in.) 6-32 68.58 mm (2.70 in.) 52.37 mm (2.06 in.) 243.31 mm (9.58 in.) M3 6-32 188.57 mm (7.42 in.) M3 127 mm (5.0 in.) 257.15 mm (10.12 in.) 22.43 mm (0.88 in.) 15.24 mm (0.6 in.) 204.77 mm (8.06 in.) 111 mm (4.37 in.) 18.34 mm (0.72 in.) GND 15.24 mm (0.60 in.) 111.76 mm (4.40 in.) 6-32 0 mm (0.0 in.) 0 mm (0.0 in.) 0 mm (0.0 in.) Mounting Holes (both sides) Ext. Fan 77.65 mm (3.06 in.) 6-32 42.15 mm (1.66 in.) Front View TEC Mounting Holes 10X On Bottom As Indicated Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. ISO 9001 Registered Coherent offers a limited warranty for all Genesis MX STM-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 88 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers. The Genesis MX SLM-Series provides up to 1W of visible laser light from either OEM or CDRHcompliant end-user systems. Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis MX SLM-Series features single frequency operation for the most demanding applications. This, combined with stable beam parameters across output powers, a diffraction-limited beam, low noise and high stability, provides unparalleled laser performance in a convenient package. •All Genesis MX advantages with single-frequency output •OEM or end-user versions •Air- or water-cooled solutions Genesis MX SLM-Series Applications: •Flow Cytometry •Particle Counting •DNA Sequencing •Microscopy Genesis Laser Family Genesis MX SLM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumentation in life science and biological applications. Genesis MX SLM-Series Features: Genesis MX SLM-Series OEM version www.Coherent.com/GenesisMX_STM-Series Superior Reliability & Performance 89 Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Optical Specifications1 Genesis MX 460 Genesis MX 480 Genesis MX 488 Wavelength (nm) 488 ±3 460 ±3 480 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 Output Power (mW) Spatial Mode Beam Quality (M2) 500 500 TEM00 Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) 500, 1000 <1.1 1.0 ±0.1 1.0 ±0.1 0.7 ±0.1 ±0.25 Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 Vertical Beam Position Tolerance5 (mm) ±<1.0 Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 Ambient Temperature (°C) Operating Non-Operating 10 to 40 -10 to 60 Environmental Conditions Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 90 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Optical Specifications1 Wavelength (nm) Genesis MX 514 Genesis MX 532 Genesis MX 561 Genesis MX 577 Genesis MX 590 577 ±3 590 ±3 500, 1000 500, 1000 514 ±3 532 ±3 561 ±3 FWHM Linewidth (MHz) <5 Pulse Format CW Spectral Purity (%) >99 500, 1000 500, 1000 500 Beam Quality (M2) TEM00 <1.1 Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1 1.0 ±0.1 0.7 ±0.1 Beam Waist Location3 (m) ±0.25 Beam Pointing Stability4,5 (μrad/°C) <5 Horizontal Beam Position Tolerance5 (mm) ±<1.0 ±<1.0 Output Power (mW) Spatial Mode Beam Divergence (mrad)(FW, 1/e2) Vertical Beam Position Tolerance5 (mm) Beam Pointing Tolerance5 (mrad) <5 Polarization Ratio Linear, >100:1 Polarization Direction Vertical, ±5° Noise (%, rms)(10 Hz to 10 MHz) <0.1 Power Stability6 (%)(pk-pk) ±<1 Warm-up Time (minutes) <10 CDRH Compliant Yes Electrical Specifications Operating Voltage (VAC) 100 to 240 Frequency (Hz) 50 to 60 Power Consumption (W) 500 10 to 40 water-cooled, 10 to 35 air-cooled -10 to 60 Environmental Conditions Ambient Temperature (°C) Operating Non-Operating Relative Humidity7 (%) 5 to 95 CE Marking IEC 61010-1/EN 61010-1 Dimensions (L x W x H) Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.) 2m (6.5 ft.) 1 2 3 4 5 6 7 8 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Circularity defined as vertical diameter divided by horizontal diameter. Negative value corresponds to a location inside head. After 2-hour warm-up. Measured at the output window. Measured over 8 hrs. Non-condensing. Back connector not included in laser head length dimension. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 91 Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Optical Specifications1 Wavelength (nm) Output Power (mW) Genesis MX 460 OEM Genesis MX 480 OEM 460 ±3 480 ±3 488 ±3 500 500 500, 1000 TEM00 <5 Spatial Mode FWHM Linewidth (MHz) Pulse Format CW Beam Circularity 1.0 ±0.1 Beam Position Tolerance (mm) Horizontal Vertical ±<1.0 ±<1.0 Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1 0.7 ±0.1 ±0.25 <1.1 <1.1 Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1 <1 Horizontal, >100:1 Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2 Horizontal Vertical Genesis MX 488 OEM Polarization Ratio CDRH Compliance No Warm-up Time (minutes) <10 Direct Modulation6 Available Operating Diode Current (A) <10 <10 <10, <12 Maximum Diode Current (A) <12 <12 <12, <15 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements7 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 Utility and Environmental Requirements 1 2 3 4 5 6 7 92 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Measured at the output of the laser head. Negative value corresponds to a location within the head. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Over 8 hours. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Genesis MX 514 OEM Optical Specifications1 Wavelength (nm) Output Power (mW) Genesis MX 532 OEM Genesis MX 561 OEM 514 ±3 532 ±3 561 ±3 577 ±3 590 ±3 500, 1000 500, 1000 500 500, 1000 500, 1000 TEM00 <5 Spatial Mode FWHM Linewidth (MHz) Pulse Format CW Beam Circularity 1.0 ±0.1 Beam Position Tolerance (mm) Horizontal Vertical ±<1.0 ±<1.0 1.0 ±0.1 0.7 ±0.1 ±0.25 <1.1 <1.1 Pointing Stability4 (μrad/°C) <5 Noise 10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1 <1 Horizontal, >100:1 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2 Horizontal Vertical Genesis MX 577 OEM Polarization Ratio CDRH Compliance No Warm-up Time (minutes) <10 Direct Modulation6 Available Operating Diode Current (A) <10 Maximum Diode Current (A) <12 Diode Voltage (V) 1.5 to 2.2 Cooling Requirements7 Active cooling required Case Temperature (°C) 25 ±2 Humidity Non-condensing Dimensions (L x W x H) Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.) Weight Laser Head (g) 730 ±10 Genesis MX 590 OEM Utility and Environmental Requirements 1 2 3 4 5 6 7 Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit. Measured at the output of the laser head. Negative value corresponds to a location within the head. Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane. Over 8 hours. Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included). Contact integration support for options on air-cooling TEC or waterplate. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 93 Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX SLM-Series (End-User) Air-cooled version 67.26 mm (2.65 in.) Side View 200.86 mm (7.91 in.) 78.74 mm (3.1 in.) 61.6 mm (2.43 in.) 68.2 mm (2.69 in.) 89.22 mm (3.51 in.) 47.64 mm (1.88 in.) 10.41 mm (0.41 in.) Rear View 10.0 mm (0.39 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep 182.96 mm (7.20 in.) 53.96 mm (2.12 in.) 36.96 mm (1.45 in.) 219.91 mm (8.66 in.) 165.96 mm (6.53 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) 10-32 10-32 61.6 mm (2.43 in.) 55.0 mm (2.17 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep M5 M5 M5 M5 Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) 45.0 mm (1.77 in.) 10-32 Mounting Holes 10-32 X 0.38 in. Deep (4X) 10-32 Top View Genesis MX SLM-Series (End-User) Water-cooled version Side View 78.74 mm (3.1 in.) 200.86 mm (7.91 in.) 61.6 mm (2.43 in.) 21.29 mm (0.84 in.) 68.2 mm (2.69 in.) 89.22 mm (3.51 in.) 47.64 mm (1.88 in.) 10.41 mm (0.41 in.) Rear View 10.0 mm (0.39 in.) Alignment Hole 0.251/0.252 in. Dia. X 0.38 in. Deep 182.96 mm (7.20 in.) 53.96 mm (2.12 in.) 36.96 mm (1.45 in.) 219.91 mm (8.66 in.) 165.96 mm (6.53 in.) Front View 0.0 mm (0.0 in.) 13.53 mm (0.53 in.) 10-32 10-32 61.6 mm (2.43 in.) 55.0 mm (2.17 in.) Alignment Slot 0.251/0.252 in. Wide X 0.25 in. Long X 0.38 in. Deep M5 M5 M5 M5 Mounting Holes M5 - 0.8 X 0.38 in. Deep (4X) 45.0 mm (1.77 in.) 10-32 10-32 Mounting Holes 10-32 X 0.38 in. Deep (4X) Top View 94 Superior Reliability & Performance • www.Coherent.com • [email protected] Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX SLM-Series (OEM) Water-cooled version Top View 111.1 mm (4.37 in.) 61 mm (2.4 in.) 34.55 mm (1.36 in.) 4.78 mm (0.19 in.) 34 mm (1.34 in.) 17 mm (0.67 in.) Mounting Holes M3 X 12.2 mm (0.48 in.) Deep (4X) Front View 3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) DIA X 5.08 mm (0.20 in.) Deep 29.78 mm (1.17 in.) 28.15 mm (1.11 in.) Slot 3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) Wide X 2.03 mm (0.08 in.) Long X 5.08 mm (0.20 in.) Deep 44 mm (1.73 in.) 120.65 mm (4.75 in.) 26 mm (1.02 in.) 22 mm (0.87 in.) Rear View Side View Base Plate Requirements 5.08 mm (0.2 in.) This surface must be flat within 0.001 in. and have 32 µm finish or better within TEC mounting areas. 5.46 mm (0.22 in.) 53.59 mm (2.11 in.) 12.7 mm (0.5 in.) 1.52 mm (0.06 in.) 18.8 mm (0.74 in.) 15.24 mm (0.6 in.) 18.8 mm (0.74 in.) 86.87 mm (3.42 in.) 8-32 UNC-2B X 0.50 Deep (4X) 89.92 mm (3.54 in.) 112.78 mm (4.44 in.) 0.125 Dia. Dowel Pin (2X) Genesis MX SLM-Series Benchtop Power Supply 6.35 mm (0.25 in.) 12.95 mm (0.51 in.) Spacer Detail 6.35 mm (0.25 in.) 45.21 mm (1.78 in.) 24.89 mm (0.98 in.) 0.188 Dia. Thru (2X) 4.06 mm (0.16 in.) 3.175 mm (0.125 in.) 112.78 mm (4.44 in.) 120.65 mm (4.75 in.) 6.35 mm (0.25 in.) Clamping Bar Detail 11.43 mm (0.45 in.) 6.1 mm (0.24 in.) 16.26 mm (0.64 in.) 5.08 mm (0.2 in.) Front View Side View 228.9 mm (9.01 in.) 361.1 mm (14.22 in.) 159.8 mm (6.29 in.) 19.8 mm (0.78 in.) Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 95 Genesis MX SLM-Series Single Frequency Visible OEM and End-User OPS Laser Systems Mechanical Specifications Genesis MX SLM-Series Low Current OEM Controller Laser Control Interlock 6-32 Side View M3 68.58 mm (2.70 in.) 52.37 mm (2.06 in.) 24V In 188.57 mm (7.42 in.) USB 204.77 mm (8.06 in.) RS-232D Serial Port Top View M3 Diode Out Bottom View 16.0 mm (0.63 in.) M3 M3 6-32 16.0 mm (0.63 in.) M3 6-32 111.0 mm (4.37 in.) M3 127 mm (5.0 in.) Rear View 111.76 mm (4.4 in.) 6-32 68.58 mm (2.70 in.) 52.37 mm (2.06 in.) 243.31 mm (9.58 in.) M3 6-32 188.57 mm (7.42 in.) M3 127 mm (5.0 in.) 257.15 mm (10.12 in.) 22.43 mm (0.88 in.) 15.24 mm (0.6 in.) 204.77 mm (8.06 in.) 111 mm (4.37 in.) 18.34 mm (0.72 in.) GND 15.24 mm (0.60 in.) 111.76 mm (4.40 in.) 6-32 0 mm (0.0 in.) 0 mm (0.0 in.) 0 mm (0.0 in.) Mounting Holes (both sides) Ext. Fan 77.65 mm (3.06 in.) 6-32 42.15 mm (1.66 in.) Front View TEC Mounting Holes 10X On Bottom As Indicated Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. ISO 9001 Registered Coherent offers a limited warranty for all Genesis MX SLM-Series lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 96 Superior Reliability & Performance • www.Coherent.com • [email protected] Femtosecond Lasers from Coherent. Chameleon Family: Tunable Femtosecond Hands-Free Lasers and OPOs Discovery High Power Dual Output • >1.4W • 680 nm to 1300 nm • 100 fs with GDD precompensation • Second high power output at 1040 nm Ultra II High Power Ti:Sapphire • >3.5W • 680 nm to 1080 nm • 140 fs pulse duration Femtosecond Lasers Vision and Vision-S With Dispersion Precompensation • >3W • 680 nm to 1080 nm • 140 fs or 75 fs pulse duration MPX and Compact OPO-Vis Wavelength Extension • Wavelength range from 340 nm to 4000 nm • Dual outputs with independent tuning • 130 fs to 200 fs pulse duration with GDD precompensation Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • www.Coherent.com/Chameleon Superior Reliability & Performance 97 The Most Complete Portfolio for Life Sciences. Discover More Solutions: Compass 115M Continuous wave laser with best performanceto-price ratio featuring excellent laser CUBE Complete, high-performance, full-feature diode laser system at an attractive price Miniature Diode Modules Family of miniature diode laser modules that produce high-quality elliptical or circular beams. Also available in line generators Verdi G Family of OPSL lasers with powers up to 20W at 532 nm 98 Superior Reliability & Performance • www.Coherent.com • [email protected] Coherent Laser Accessories. Discover More Solutions: OBIS LX/LS Laser Box OBIS LX/LS Scientific Remote OBIS LX/LS 6-Laser Remote OBIS LX/LS Heat Sink Sapphire Driver Unit Accessories OBIS LX/LS Single Laser Remote Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 99 OBIS LX/LS Scientific Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. OBIS LX/LS Scientific Remote Features: •Complete remote control of up to six OBIS lasers The OBIS Scientific Remote for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface with a touch-screen and internal power supply for up to six lasers. •Touchscreen interface with audio As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. •USB, RS-232 and Ethernet for additional control from host computer To simplify integration the OBIS Scientific Remote connects to the single SDRtype connector for power, signals and communication. The OBIS Scientific Remote then brings all of these features to controls and connectors on the Remotes front panel. •Single SDR connection to each laser OBIS Scientific Remote offers a convenient handle to angle the unit for easier display. Figure 1: OBIS LX/LS Scientific Remote for up to six lasers. Lasers sold separately. •Modulation inputs for analog and digital for six lasers •OBIS connection software for PC •Internal power supply remote and six lasers •Laser safety features such as key switch and interlock OBIS LX/LS Scientific Remote Applications: •Laboratories needing CDRH features •Applications wanting a simple Analog or Digital inputs to control the laser •Applications wanting laser control at a remote location away from the laser www.Coherent.com/OBISHeatSink 100 Superior Reliability & Performance OBIS LX/LS Scientific Remote Laser Remote and Power Supply for up to Six Lasers System Specifications OBIS LS/LX Scientific Remote Touchscreen Display Size 108 mm (4.3 in.) diagonal Touchscreen Display Resolution, Type 480 x 272 pixel, QVGA, TFT, 24-bit color Touchscreen Display Mode1 Resistive Touchscreen Audio Yes Internal Power Supply Yes OBIS Lasers that can be connected 1 to 6 lasers with power to optional 1 to 6 heat sink cooling fans Host Computer Remote Control via USB2 USB 2.0, Mini B Host Computer Remote Control via RS-2322 RS-232 115.2K, 8N1 Host Computer Remote via Ethernet2 Ethernet 10/100 (Mb) RJ45 Carry Handle and Stand 3-Position Interlock Yes, included with shorting wire Laser Status Indicators Yes, Individual LED for each laser Analog Modulation Input SMB, 2000 Ohm, 0 to 5V Digital Modulation Input3 SMB, 50 Ohm, 0 to 3V Warm-up Time (minutes)(from cold start) <2 OBIS Connection Software2 Included on USB drive with user manual Utility and Environmental Requirements Power Consumption (W)(typical) 5 (without lasers) Power Consumption (W)(maximum) 110 (with 6 lasers) Internal Cooling Fan Yes Power Input - Universal IEC-320 Power Cord (USA) 2.4m (8 ft.) Operating Condition4 (°C) 0 to 50 Non-operating Condition4 (°C) -10 to +70 Shock Tolerance (6 ms) 20 g Operating Voltage 90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) 180 x 293.5 x 104.4 mm (7.09 x 11.55 x 4.11 in.) Weight 1.75 kg (3.86 lbs.) Weight, Laser-to-Remote Cable (optional) 0.1 kg for 1 meter (0.25 kg for 3 meter) Part Number for OBIS Scientific Remote 1234465 Part Number for OBIS Scientific Remote with Six Laser-to-Remote SDR Cables Included (1m each) 1234466 Part Number for OBIS LX/LS SDR-Type Cable from Laser to Remote 1-meter 1179451 3-meter 1179858 0.3-meter 1197523 1 2 3 4 Resistive touchscreen will work with gloves. This is a pressure sensitive touchscreen - not capacitive. Host computer not provided. RS-232 and USB cable not provided. Software operates on Windows 7. Digital modulation can be driven up to 5V. Non-condensing. Screen Shot Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 101 OBIS LX/LS Scientific Remote Laser Remote and Power Supply for up to Six Lasers Mechanical Specifications OBIS LX/LS Scientific Remote Front View 118 mm (4.6 in.) 294 mm (11.6 in.) Handle Width 259 mm (10.2 in.) 183 mm (7.2 in.) 30° Typical Rear View Handle Location LOCKABLE IN 9 POSITIONS Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LS/LX Scientific Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 102 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS Single Laser Remote for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all- in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. To simplify integration the OBIS Single Laser Remote connects to the single SDR-type connector for power, signals and communication. The OBIS Single Laser Remote then brings all of these features to controls and connectors on the Remotes front and back panel. OBIS Single Laser Remotes can even be stacked together with the provided mounting hardware for applications using multiple OBIS LX/LS lasers. OBIS LX/LS Single Laser Remote Features: •Compact size •Laser safety features (CDRH) such as key switch and interlock • Laser status indicators •Full input and output connections for control, analog modulation and digital modulation •Compact power supply for single laser included •Brackets for mounting and stacking included OBIS LX/LS Single Laser Remote Applications: •Laboratories needing CDRH features •Applications wanting a simple Analog or Digital inputs to control the laser •Applications wanting laser control at a remote location away from the laser www.Coherent.com/OBISSingleLaserRemote Superior Reliability & Performance 103 OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply System Specifications OBIS LX/LS Single Laser Remote Host Computer Remote Control via USB1 USB 2.0, Mini B Host Computer Remote Control via RS-2321 RS-232 115.2K, 8N1 Interlock Yes, included with shorting wire Laser Status Indicators Yes Analog Modulation Input SMB, 50 Ohm OR 2KOhm, 0 to 5V Digital Modulation Input2 SMB, 50 Ohm, 0 to 3V Warm-up Time (minutes)(from cold start) <2 OBIS Connection Software3 Included on USB drive with user manual Power Consumption (W)(typical) 1 (laser not included) Power Consumption (W)(maximum) 2 (laser not included) Power Input Universal IEC-320 Power Cord (USA) 2.4m (8 ft.) Operating Condition4 (°C) 0 to 40 Non-operating Condition4 (°C) -10 to +70 Shock Tolerance (6 ms) 20 g Operating Voltage 90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) 105 x 68 x 36 mm (4.1 x 2.7 x 1.4 on.) Weight OBIS Single Laser Remote 0.23 kg (0.5 lbs.) 0.23 kg (0.5 lbs.) Power Supply (included) Part Number for OBIS Single Laser Remote 1173961 Part Number for OBIS LX/LS SDR-Type Cable from Laser to Remote 1-meter 1179451 3-meter 1179858 0.3-meter 1197523 Part Number for OBIS Power Supply, 12VDC 1 2 3 4 1184491 Host computer not provided. USB cable provided. RS-232 cable not provided. Digital modulation can be driven up to 5V. Software operates on Windows 7. Non-condensing. OBIS LX/LS Single Laser Remote Controls Key Switch Interlock Connection Power Input I/O Connection: Laser Ready, Fault, Base Plate Temp., Power Monitor, Slow Digital Modulation, Laser Diode Current RS-232 Status Indicators 104 To Laser Analog and Digital SMB Connection Illuminated On/Off Switch Superior Reliability & Performance • www.Coherent.com USB • [email protected] OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply OBIS LX/LS Single Laser Remote Mounting Brackets and Stacking Brackets 126 mm (5.0 in.) 6.9 mm (0.3 in.) (included with OBIS LX/LS Single Laser Remote) 6.4 mm (0.3 in.) 63.5 mm (2.5 in.) 4X Slotted Holes 50 mm (2.0 in.) 4X 7.1 mm (0.3 in.) Top View 4X 8.1 mm (0.3 in.) 139.9 mm (5.5 in.) 108.1 mm (4.3 in.) 37.8 mm (1.5 in.) Front View Side View Example of Stacking OBIS LX/LS Single Laser Remotes (mounting bracket included, second remote sold separately) Top View 108.6 mm (4.3 in.) 75.7 mm (3.0 in.) Front View Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Side View Superior Reliability & Performance 105 OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply OBIS Single Laser Power Supply (included with OBIS LX/LS Single Laser Remote) Cord Length: 1219.2 mm (48.0 in.) Top View 104.4 mm (4.1 in.) Power Cord sold separately Connector 2-Pin Male Molex P/N SDA43025-0200 OBIS Single Laser Remote Power Supply offers 12VDC output to the OBIS Remote and has an universal input of 100-240 VAC (47-63 Hz). 2X Contact Pin Molex P/N 43030-0009 42 mm (1.7 in.) 31 mm (1.2 in.) Pin 1 12 VDC Pin 2 Ground Front View IEC-320-C14 Input Receptacle OBIS Single Laser Remote requires a SDR-type cable to connect the Laser to the Remote. This cable carries power, signals and communications. Available in 0.3m, 1m and 3m lengths. Sold separately. (Note: if buying an OBIS Laser System then the OBIS laser is shipped with the OBIS Single Laser Remote and a 1-meter SDR-type cable.) SDR-type Connector 106 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LX/LS Single Laser Remote Full Feature Laser Remote and Power Supply Mechanical Specifications OBIS LX/LS Single Laser Remote 104.9 mm (4.1 in.) 32 mm 35.9 mm (1.3 in.) (1.4 in.) Top View 67.5 mm (2.7 in.) Side View 12 mm (0.5 in.) 2 Places 43.5 mm (1.7 in.) 2 Places Front View 9.2 mm (0.4 in.) 2 Places Rear View 13.7 mm (0.5 in.) 2 Places 4X #4-40 Threads 2 Places, Near and Far Side Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LX/LS Single Laser Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 107 OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS 6-Laser Remote for OBIS LS and OBIS LX offers power to six lasers in a convenient CDRH-compliant interface. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. To simplify integration the OBIS 6-Laser Remote connects to the 12VDC Power Input on the back of the OBIS Laser. This allows the OBIS 6-Laser Remote to provide power On/Off to the laser. For applications requiring laser status and control, the USB on the back of each OBIS Laser can be used to communicate with the laser directly. The OBIS 6-Laser Remote is not recommended for applications that require Analog or Digital Modulation. OBIS 6-Laser Remote comes complete with mounting brackets and hardware to mount the remote to a table or stack remotes. OBIS LX/LS 6-Laser Remote Features: •Compact size •Laser safety features (CDRH) such as key switch and interlock •Laser On/Off status indicators •Compact single power supply included •Brackets for mounting and stacking included OBIS LX/LS 6-Laser Remote Applications: •Laboratories needing CDRH features •Applications wanting a simple remote control to turn the lasers On and Off •Applications that do not require Analog or Digital modulation Figure 1: Individual labels included for the laser wavelength identification. www.Coherent.com/OBIS6-LaserRemote 108 Superior Reliability & Performance OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers System Specifications OBIS LS/LX 6-Laser Remote Laser Power Cables Six, 1 meter each, color coded Interlock Yes, included with shorting wire Laser Status Indicators Yes System and Key Switch Indicator Yes Warm-up Time (minutes)(from cold start) <1 Power Consumption (W) Typical Maximum 1 (laser not included) 2 (laser not included) Power Input Universal IEC-320 Power Cord (USA) 2.4m (8 ft.) Operating Condition1 0 to 50°C (32 to 122°F) Non-operating Condition1 -10 to +70°C (14 to 158°F) Shock Tolerance (g)(6 ms) 20 Operating Voltage 90 to 264 VAC, 47 to 63 Hz Dimensions (L x W x H) OBIS 6-Laser Remote Power Supply (included) 105 x 68 x 36 mm (4.1 x 2.7 x 1.4 in.) 189 x 89.4 x 47.1 ( 7.4 x 3.5 x 1.9 in.) Weight OBIS 6-Laser Remote Power Supply (included) 0.23 kg (0.5 lbs.) 0.9 kg (2.0 lbs.) Part Number OBIS 6-Laser Remote OBIS Power Supply, 12VDC 1203909 1211389 Figure 2: FRONT VIEW. The OBIS 6-Laser Remote comes with wavelength tags to identify each laser connected. 355 594 375 635 405 637 415 640 420 647 445 650 458 660 473 685 488 730 505 785 514 830 520 980 532 552 561 588 Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 Non-condensing. 1 1 0 0 1 109 OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers Figure 3: REAR VIEW. Six color coded power cables included. Interlock included. Laser sold separately. Figure 4: Single power supply included to drive six lasers with remote. 110 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers Figure 5: Six remote-to-laser power cables included. Color coded for easy installation and identification. One meter length. Figure 6: Power Supply with IEC-320 universal input. Includes On/Off switch. Cable Length: 1220 mm ±25 mm (48.0 in. ±1 in.) Connector: 6-Pin Male Connector MOLEX Part # 43025-0600 89.4 mm (3.5 in.) 6X Contact Pin MOLEX Part # 43030-009 189 mm (7.4 in.) Pins 1,2,3: Ground Pins 4,5,6: 12VDC 4 6 1 3 47.1 mm (1.9 in.) On/Off Switch IEC 320-C14 Input Receptacle Universal 90/264VAC Capable Input Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 111 OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers OBIS LX/LS 6-Laser Remote Mounting Brackets and Stacking Brackets 6.9 mm (0.3 in.) (included with OBIS LX/LS 6-Laser Remote) 126 mm (5.0 in.) 6.4 mm (0.3 in.) 63.5 mm (2.5 in.) 4X Slotted Holes 50 mm (2.0 in.) 4X 7.1 mm (0.3 in.) 4X 8.1 mm (0.3 in.) Top View 139.9 mm (5.5 in.) 108.1 mm (4.3 in.) 37.8 mm (1.5 in.) Front View Side View Example of Stacking OBIS LX/LS 6-Laser Remotes (mounting bracket included, second remote sold separately) Top View 108.6 mm (4.3 in.) 75.7 mm (3.0 in.) Front View 112 Superior Reliability & Performance Side View • www.Coherent.com • [email protected] OBIS LX/LS 6-Laser Remote Laser Remote and Power Supply for up to Six Lasers Mechanical Specifications OBIS LX/LS 6-Laser Remote 104.9 mm (4.1 in.) 32 mm (1.3 in.) Top View Side View 67.5 mm (2.7 in.) 12 mm (0.5 in.) 2 Places 43.5 mm (1.7 in.) 2 Places 35.9 mm (1.4 in.) Front View 9.2 mm (0.4 in.) 2 Places Rear View 13.7 mm (0.5 in.) 2 Places 4X #4-40 Threads 2 Places, Near and Far Side Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LS/LX 6-Laser Remotes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 113 OBIS LX/LS Heat Sink Heat Sink with Fan for Thermal Management OBIS LX/LS Heat Sink Features: OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. •Small footprint As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. •Precision dowel pin laser positioning To simplify integration, the OBIS LX/LS accessories offer a separate Heat Sink with an integrated fan. The Heat Sink offers a convenient way to raise the laser beam height off the table and provide thermal management. The fan simply plugs into the back of the OBIS LX or OBIS LS laser to receive 12V DC power. •Integrated cooling fan with vibration isolation •Rugged design •Convenient 69 mm (2.7 inch) beam height •Output beam centered on standard table bolt pattern •Universal mounting to imperial or metric bolt pattern •Proven stable performance over time and temperature •Fan power connector plugs directly to OBIS Laser Head •Laser can be mounted on top or side for opposite polarization www.Coherent.com/OBISHeatSink 114 Superior Reliability & Performance OBIS LX/LS Heat Sink Heat Sink with Fan for Thermal Management Top and Side Mount Plug Holes Allow for Heat Sink to be mounted in either direction. Need horizontal polarization – mount the Heat Sink with the laser on the side. Top Mount Plug Holes Remove Plastic Hole Plugs to Install Screws (provided) to Mount onto Table Connector 2 Pos Vendor: Molex Vendor Part: 51021-0200 Side Mount Plug Holes Toll Free: (800) 527-3786 • Optional: Mount Heat Sink on its side for special applications that may require horizontal polarization Tel: (408) 764-4983 • Superior Reliability & Performance 115 OBIS LX/LS Heat Sink Heat Sink with Fan for Thermal Management Mechanical Specifications OBIS LX/LS Heat Sink Top View 100.8 mm (3.97 in.) 12 mm (0.47 in.) 0.0 OBIS Datum Point 2x M4 20.5 mm (0.8 in.) 8 4x M3 6 mm (0.24 in.) 87.5 mm (3.44 in.) 8.33 mm (0.33 in.) 0 mm (0.0 in.) 3.5 mm (0.14 in.) 8.5 mm (0.33 in.) 23.5 mm (0.93 in.) 2 x 8-32 3x OBIS Alignment Pins 25.4 mm (1.0 in.) 25 mm (0.98 in.) 30 mm (1.18 in.) Threads for Accessory Mounting Connector 2 Pos Vendor: Molex Vendor Part: 51021-0200 Front View Rear View 50 mm (1.97 in.) Side View 50 mm (1.97 in.) Fan 165.2 mm (6.5 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS LS/LX Heat Sinks. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 116 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LX/LS Laser Box Laser Mount with Cooling, Interface and Power Supply OBIS LX/LS Laser Box Features: OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs. The OBIS Laser Box for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface with convection cooling for five lasers. As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. OBIS lasers come with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser. To simplify integration, the OBIS Laser Box connects to the single SDR-type connector for power, signals and communication. The OBIS Laser Box then brings all of these features to the front panel controls and connectors. The OBIS Laser Box offers stability over temperature with conduction cooling for the laser baseplate and cooling fans to maintain the convection cooling. Every OBIS Laser Box comes with a separate 12V DC power supply with capacity to drive the five lasers, interface and cooling. •Integrated five bay mount for OBIS lasers •Heat sinks and cooling fans •Modulation inputs for analog and digital for five lasers •USB and RS-232 interface for additional control from host computer •Coherent Connection software for PC •Status indicators for each laser •External power supply •Laser safety features such as key switch and interlock OBIS LX/LS Laser Box Applications: •Laboratories needing CDRH features •Applications wanting a simple Analog or Digital inputs to control the laser •Applications wanting thermal management (cooling) for the lasers www.Coherent.com/OBISLaserBox Superior Reliability & Performance 117 OBIS LX/LS Laser Box Laser Mount with Cooling, Interface and Power Supply System Specifications OBIS LS/LX Laser Box OBIS Laser Box Laser Box – five bay1 Power Supply2 Part #1228877 Included Host Computer Remote Control via USB3 USB 2.0, Mini B Host Computer Remote Control via RS-2323 RS-232, 115.2K, 8N1, DB-9F Analog Inputs, 5 each SMB Connector, 0V to 5V, 2000 Ohm input impedance Digital Inputs4, 5 each SMB Connector, 0V to 3V, 50 Ohm input impedance Interlock Yes, included with shorting wire Laser Status Indicators Yes, Individual LED for each Laser Warm-up Time (minutes)(from cold start) <2 Coherent Connection Software for PC Included on USB drive with user manual Safety Key switch and interlock Utility and Environmental Requirements Power Consumption (W)(typical) 5 (without lasers) Power Consumption (W)(maximum) 140 (with 5 lasers) Internal Cooling Fan Yes, 3 each Power Input to Laser Box, 6 Pin (VDC) 10 to 14 at 10A maximum, Molex P/N 43025-0600 for mating connector Power Cord (USA) 2.4m (8 ft.) Operating Condition5 (°C) 10 to 40 for OBIS LX, 10 to 35 for OBIS LS Non-operating Condition5 (°C) -10 to 60 Shock Tolerance (g)(6 ms) 20 Operating Voltage (VAC) 90 to 264, 47 to 63 Hz Dimensions (L x W x H) Laser Box Power Supply 241 x 184 x 88 mm (9.5 x 7.3 x 3.5 in.) 189 x 89.4 x 47.1 mm (7.4 x 3.5 x 1.9 in.) Weight 1 2 Laser Box Power Supply 3.9 kg (8.5 lbs.) 0.9 kg (2.0 lbs.) Lasers sold separately. Power supply included. Order item number 1211389 for spare or replacement. Example of OBIS Laser System Figure 1: Laser Box with the lid removed 3 4 Host computer not provided. RS-232 and USB cable not provided. Digital Modulation can be driven up to 5 Volts. 5 Non-condensing. Figure 2: Laser Box example as part of a Galaxy beam combiner system. Lasers and Galaxy Beam Combiner sold separately. Figure 3: Laser Box example with 5 lasers installed. Lasers sold separately. 118 Superior Reliability & Performance • www.Coherent.com • [email protected] OBIS LX/LS Laser Box Laser Mount with Cooling, Interface and Power Supply Mechanical Specifications OBIS LS/LX Laser Box Top View 279.4 mm (11.0 in.) With Top Cover Removed 86.2 mm (3.4 in.) 87.8 mm (3.5 in.) to Rubber Feet 275 mm (10.8 in.) 5 Bays for OBIS Lasers 135.8 mm (5.3 in.) Ø7.0 (3) Thru (8X) 123.1 mm (4.8 in.) 96.6 mm (3.8 in.) 50 mm 76.2 mm (2.0 in.) (3.0 in.) 84.6 mm (3.3 in.) 184.2 mm (7.3 in.) 205.0 mm (8.1 in.) 160.5 mm (6.3 in.) 116.1 mm (4.6 in.) 71.6 mm (2.8 in.) 27.2 mm (1.1 in.) 0 mm (0.0 in.) Side View (Mounting Bracket Ø11.4 (0.5 in.) Shown Removed) Laser Interlock Fiber/Free Space Beam Exit Holes (5X) USB Communications Mini-B Power Power Button System Status LED Key Switch Holes for Mounting OBIS Galaxy Unit 4X #4 Countersink Clearance Hole from Opposite Side Included Hole Cover Plugs Not Shown Analog/Digital Modulation Input and Status LED for Each Laser Removable Mounting Brackets (2X) 62.3 mm (2.5 in.) Rear View 204.2 mm (8.0 in.) 208.6 mm (8.2 in.) 0 mm (0.0 in.) 0 mm (0.0 in.) 28 mm (1.1 in.) 241.3 mm (9.5 in.) 85.7 mm (3.4 in.) Air Intake with Cleanable Air Filters 14.2 mm (0.6 in.) 4-40 Tapped Holes (2X) 3.6 mm (0.14 in.) Deep Both Sides OBIS 6-Laser Remote Power Supply Air Exhaust, 3X <509 L/min. (18 CFM) Total RS-232 Communications Front View Cord Length: 1219.2 mm (48 in.) Part #1211389 included 89.4 mm (3.5 in.) 189 mm (7.4 in.) 47.1 mm (1.9 in.) IEC-320-C14 Input Receptacle Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all OBIS Laser Boxes. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 119 Sapphire Driver Unit Operate, Control and Monitor Sapphire Laser Heads Sapphire Driver Unit Features: The Sapphire Driver Unit provides controller and power supply in a wall plugready box, featuring a standby/laser ON switch and remote control options via Analog, RS-232 and USB interface. The Driver Unit enables and simplifies stand-alone applications: it can operate, control and monitor all laser heads of the Sapphire line: Sapphire LP, Sapphire FP, Sapphire SF. A Sapphire CDRH laser head and a Sapphire Driver Unit when properly installed will be CDRH compliant. •One-box wall plug controller and power supply •Enables stand-alone applications (CDRH Compliant) •Standby/Laser ON key switch •Remote interlock •Remote control option via Analog, RS-232, or USB interface •Laser power adjustment and graphic display (optional) •Front panel control with laser power adjustment and status display (optional) •Status LEDs Sapphire Driver Unit for: •Sapphire LP •Sapphire FP •Sapphire SF www.Coherent.com/SapphireDriverUnit 120 Superior Reliability & Performance Sapphire Driver Unit Operate, Control and Monitor Sapphire Laser Heads Utility and Environmental Requirements Sapphire Driver Unit Power Consumption (VA) <140 Operating Voltage 88 to 264 VAC, 50/60 Hz Ambient Temperature Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F), non-condensing -30 to 60°C (-22 to 140°F) Dimensions1 (L x W x H) 196 X 164 X 99.5 mm (7.72 x 6.46 x 3.92 in.) Cable Length (Head to Controller) 2 m (6.56 ft.), optional 5 m (16.4 ft.) Weight 1.85 kg (4.08 lbs.) Measurement Tools Meter FieldMax™-TO Sensor PS10Q Please consider additional space for the front panel switches and the cable connections on the rear panel. 0 mm (0 in.) 6.4 mm (.25 in.) 16.4 mm (.65 in.) Toll Free: (800) 527-3786 72 mm (2.83 in.) • 84 mm (3.31 in.) 19 mm (.75 in.) 50 mm (1.97 in.) Airflow 6 mm (.24 in.) 0 mm (0 in.) Airflow Dowel pin (3 pcs) Tel: (408) 764-4983 Laser Emission Indicator A 80 mm (3.149 in.) Beam 22.50 mm (.89 in.) 135 mm (5.31 in.) 147 mm (5.79 in.) 158 mm (6.22 in.) 170 mm (6.69 in.) 180 mm (7.09 in.) 192.50 mm (7.58 in.) 196.50 mm (7.74 in.) 7 mm (.28 in.) 4.50 mm (1.77 in.) 0 mm (0 in.) 8 mm (.31 in.) 20 mm (.78 in.) 69 mm (2.72 in.) 70.40 mm (2.77 in.) • 102.50 mm (4.035 in.) The optional laser emission indicator is located at the end of a 5 m (16.4 ft.) cable which connects to the rear panel of the driver unit. This indicator shall be mounted at the front of the optional heat sink near the beam aperture (required for CDRH compliant operation only). 121.9 mm (4.79 in.) 131 mm (5.16 in.) 1 Superior Reliability & Performance 121 Sapphire Driver Unit Operate, Control and Monitor Sapphire Laser Heads Mechanical Specifications Top View Front View (Display Version) Side View Rear View (Display Version) 196 mm (7.72 in.) Front View (Non-Display Version) Rear View (Non-Display Version) 90 mm (3.54 in.) Key Switch 164 mm (6.46 in.) 9.5 mm (0.37 in.) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative. 122 Superior Reliability & Performance • www.Coherent.com • [email protected] Laser Measurement and Control Accessories. MX 460 Meter, Sensor and Accessory Compatibility LaserMeter Sensor Accessory OBIS FP FieldMaxII-TO PS10 OBIS LG 355 FieldMaxII-TO PS10 Structured Light Flat Top Projector Please Call Factory Please Call Factory CUBEFieldMaxII-TO PS10Q OBIS FieldMaxII-TO PS10Q CUBE FP (Collimated Beam) FieldMaxII-TO PS10Q CUBE FP (FC/PC) FieldMaxII-TO PS10 Radius FieldMaxII-TO PS10Q Miniature Diode Laser Module FieldMaxII-TO PS10Q Compass 115M FieldMaxII-TO PS10Q, OP-2 VIS Sapphire LP FieldMaxII-TO PS10Q Sapphire FP FieldMaxII-TO PS10Q Sapphire SF FieldMaxII-TO PS10Q Sapphire Driver Unit FieldMaxII-TO PS10Q Genesis CX Series FieldMaxII-TO PS10Q Genesis MX Series STM (OEM) FieldMaxII-TO PM10 Genesis MX Series MTM (OEM) FieldMaxII-TO PM10 Chameleon Ultra FieldMaxII-TO PM10 Chameleon Vision FieldMaxII-TO PM10 Chameleon Vision-S FieldMaxII-TO PM10 Chameleon PreComp N/A N/A Chameleon MPX FieldMaxII-TO PM10 Product Name Part Number OP-2 VIS 1098313 PM10 1097901 PS10Q 1098400 PS10 1098350 FC Fiber Adapter 0012-3863 FieldMaxII-TO Toll Free: (800) 527-3786 FC Fiber Adapter FC Fiber Adapter 1098579 • Tel: (408) 764-4983 • Superior Reliability & Performance 123 Notes 124 Superior Reliability & Performance • www.Coherent.com • [email protected] Notes Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 125 Notes 126 Superior Reliability & Performance • www.Coherent.com • [email protected] Doing Business with Coherent. Ordering We accept orders online at www.Coherent.com (CUBE only), by phone, fax, e-mail or mail. When confirming an order that has been placed, please indicate “confirming” on the order. Warranty Goods are warranted to be free from defects and to work in the manner specified for a period of 12 months from date of shipment. Extended warranty is available on some products. Pricing Prices indicated are current at the time of publication, but we reserve the right to change these without notice. Prices are FOB origin, and do not include freight, duty or any applicable taxes. Specifications Specifications are current at the time of publication, but Coherent reserves the right to change these without prior notice. Please consult our local Sales Office or Distributor for Export prices. Terms of Payment Acceptable terms of payment for domestic orders include cash with order, major credit card, COD or Net 30 with prior approval of credit. Export terms are strictly letter of credit, cash in advance or major credit card. Shipping Shipment means are at the discretion of Coherent, but we will attempt to meet your special requests. We do not take responsibility for any delays or damage caused by the shipper. Technical Information The technical information provided in this catalog is intended to be helpful in the application of Coherent products, but we do not accept responsibilty for its use. Terms and Conditions of Sale Terms and Conditions of Sale are specific to each country in which Coherent operates. They are supplied with all quotations and invoices and can be sent by fax or mail on request. Nothing in the foregoing statements modifies the Terms and Conditions in effect for each country of operation. Returns Returns are accepted only after a return authorization number has been obtained from Coherent, and credit will be allowed for goods returned under authorization in good condition. Order Cancellation Cancellation of orders will incur a termination charge of not less than 10% of the order value, and Coherent reserves the right to charge for all costs incurred in support of any cancelled order. Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 127 How to Contact Us. Contact Us by Phone Coherent, Inc. (800) 527-3786 or (408) 764-4983 Benelux: +31 (30) 280 6060 China: +86 (10) 8215 3600 France: +33 (0)1 8038 1000 Germany/Austria/Switzerland: +49 (6071) 968 333 Italy: +39 (02) 31 03 951 Japan: +81 (3) 5635 8680 Korea: +82 (2) 460 7900 Taiwan: +886 (3) 505 2900 United Kingdom/Ireland: +44 (0) 1353 658833 Contact Us by Email Laser Products: [email protected] Laser Measurement: [email protected] Service: [email protected] All Coherent product names are trademarks of Coherent, Inc. *All products indicated by an asterisk are registered trademarks of their respective companies. 128 Superior Reliability & Performance • www.Coherent.com • [email protected] Elevate Your Life Sciences Application. Explore Coherent’s Complete Laser Portfolio and Find Your Solution by Visiting Our Website. www.Coherent.com/ LasersLifeSciences Accessories Application Reports Enhanced Application Finder Technical Illustrations, Videos Brochures, Tech Notes, Data Sheets Toll Free: (800) 527-3786 • Tel: (408) 764-4983 • Superior Reliability & Performance 129 Coherent, Inc. 5100 Patrick Henry Drive Santa Clara, CA 95054 United States Toll Free: 1-800-527-3786 Tel: (408) 764-4983 Fax: (408) 764-4646 www.Coherent.com Germany/Austria/Switzerland Coherent GmbH Dieselstraße 5b D-64807 Dieburg Germany Tel: +49-6071-968-333 Fax: +49-6071-968-499 www.Coherent.de China Coherent Inc., Beijing Room 1006-1009, Raycom Info Park Tower B, No. 2, Kexueyuan South Road Haidian District Beijing, 100190, China Tel: 86-10-8215-3600 Hotline Mainland China Only: +86-4006100209 www.Coherent.com.cn Italy Coherent Italia Via Borgese, 14 Milano, 20154 Italy Tel: +39-02-31-03-951 Fax: +39-02-31-03-95-55 www.Coherent.it France Coherent France Parc Technopolis 3, Avenue du Canada Bâtiment Zeta 91978 Courtaboeuf cedex France Tel: +33-1-80-38-10-00 Fax: +33-1-80-38-10-01 www.Coherent.fr Printed in the U.S.A. MC-001-16-1M1115 Copyright © 2015 Coherent, Inc. Japan Coherent Japan, Inc. Toyo MK Building 7-2-14 Toyo Koto-ku, Tokyo 135-0016 Japan Tel: +81 3-5635-8680 Fax: +81 3-5635-8701 www.Coherent.co.jp Korea No. 101, Eagle Town 278-20, 3 dong Seongsu 2 ga Seongdong-gu, Seoul 133-832, South Korea Tel: +82 2 460 7900 www.Coherent.com Netherlands Coherent B.V. Smart Business Park Kanaalweg 18A 3526 KL Utrecht Netherlands Tel: +31-30-280-6060 Fax: +31-30-280-6077 www.Coherent.nl Taiwan Coherent Taiwan 2F-5, No. 38. Taiyuan St. Zubei City, Hsinchu County 30265 Taiwan Tel: +886-3-505-2900 www.Coherent.com United Kingdom/Ireland Coherent UK Ltd. St Thomas’ Place Cambridgeshire Business Park Ely CB7 4EX England Tel: +44-1353-658-833 Fax: +44-1353-659-110 www.Coherent.com VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT. VISIBLE AND INVISIBLE LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IV LASER PRODUCT. 350 nm to 1100 nm <500 mW 400 nm to 700 nm <10W