Download iFLEX-iRISTM Laser systems with fiber delivery

iFLEX-iRIS
Laser systems with fiber delivery
TM
The Qioptiq iFLEX-iRIS™ solid state laser systems offer
high performance stability with low amplitude noise
in a miniaturized package. They are ideally suited
for integration into instruments that demand high
Some of the product features include:
Product features include:
• High stability operation
performance yet need to retain a small form factor. The
• High beam quality
lasers are mode-hop free and wavelength stabilized as a
• Low noise
result of active temperature control.
• Miniaturized size for easy integration
control mode using an internal feedback loop. This
• Integrated electronics and TEC temperature
stabilized control
feature provides highly stable output power, and ensures
• Conductively cooled through baseplate
All CW iFLEX-iRIS lasers operate in automatic power
the high power stability performance is maintained
throughout the product lifetime.
• Mechanical shutter
• Electronic shuttering
Well controlled digital modulation can be offered through
the electrical interface PINs. This feature must be selected
with order.
Increased freedom of design and ease of servicing is
offered with the detachable kineFLEX® single-mode
polarization maintaining fiber delivery system. Fiber may
Options include:
• Over 100 standard single-mode polarization
maintaining fiber delivery options using the
detachable kineFLEX
• Digital modulation
be selected with order or fitted by customers as a later
• CDRH compliant interlock unit
upgrade option, to iFLEX-iRIS lasers with a centralised
• Adaptor cable when an iFLEX-iRIS is used as a
retrofit replacement for an iFLEX2000™ laser
output beam. This detachable fiber delivers true “Plug &
Play” design freedom.
• Industry compatible footprints and beam exit
positions
• OEM laser versions on request
PSM1035_1
• OEM fiber versions on request
1 of 8
iFLEX-iRIS specification overview
Operating Wavelengths
Wavelength
(nm)
375
405
445
450
458
473
488
515
520
633
640
660
670
730
780
830
852
nm
Power from
laser (mW)
15,
20,
50
50,
100,
150,
220
20,
30,
75
30,
75
20
75
20,
50,
100,
120
20,
60
30,
75
30,
75
20,
50,
80
20,
50,
80
10
20
15,
50
20,
50,
80
40
mW
Power after
fiber output
(mW)
10,
30
30,
50,
100,
150
20,
50
20,
50
20
50
20,
50,
80
40
20,
50
20,
50
20,
50
20,
50
6
10
10,
30
20,
50
30
mW
Technical Specifications
Laser parameters
Fiber parameters
Center wavelength
±5
nm
Power stability
(8 hours)
<1
%
Optical Noise
(20Hz-2MHz)
< 0.1*
% rms
0.7
mm
> 100:1
-
12V DC, 1A
-
Max. base plate temp.
40
ºC
Max. heat dissipation
12
W
Beam diameter at 1/e2
Polarization ratio
Electrical
Power supply
Operation Modes
CW
Digital Modulation
0 - 100% power adjustment
TTL signal
-
Rise time (10% to 90%)
<1
µsec
Fall time (90% to 10%)
<1
µsec
Modulation bandwidth
500
kHz
Laser with kineMATIX®
70(L) x 40(W) x 38(H)
mm
1142(L)x **51(W)x **51(H) mm
1 to 3
Fiber jacket
m
Stainless steel, 5mm OD
Single-mode polarization
maintaining
Fiber type
Collimated fiber output beam
Beam diameter
0.7mm
mm
M squared
typ 1.1
-
≤1
μrad/ºC
Pointing stability
Beam divergence
Diffraction Limited
Mechanical dimensions
Ø12 x 50
mm
Beam position
≤ ± 0.15
mm
Beam angle
≤ ± 0.5
mrad
Connectorized output beam
Single-mode polarization
maintaining fiber
FCP (polarization keyed), FCP8,
APC (polarization keyed and 8
degree polished)
Environmental conditions
Storage temp.
Laser Dimensions
Laser only
Fiber length
Operating pressure
Operating temp.
Operating humidity
10 to 50
Atmospheric
10 to 40
ºC
ºC
Non-condensing, dew point <20°C
Custom OEM versions on request
2 of 8
PSM1035_1
*Model specific please contact Qioptiq for details
**Full extension travel on kineMATIX adjustment screws. Typical setting
is 48.5mm(W) x 48.5(H)
iFLEX-iRIS specification overview
Operating Wavelengths: 532nm & 561nm
Wavelength (nm)
532
561
Power from laser (mW)
20, 40
20, 40
Power after fiber output (mW)
30
30
Technical Specifications
Laser parameters
Fiber parameters
Center wavelength
±2
nm
Power stability
(8 hours)
<2
%
Optical Noise
(20Hz-2MHz)
< 0.3*
% rms
0.7
mm
> 100:1
-
12V DC, 1A (laser)
-
Max. base plate temp.
40
ºC
Max. heat dissipation
12
W
Beam diameter at 1/e2
Polarization ratio
Electrical
Power supply
Operation Modes
CW
50 - 100% power adjustment
Laser Dimensions
Laser only
70(L) x 40(W) x 38(H)
mm
Laser with kineMATIX®
142(L) x 51**(W) x 51**(H) mm
Fiber length
1 to 3
Fiber jacket
m
Stainless steel, 5mm OD
Single-mode polarization
maintaining
Fiber type
Collimated fiber output beam
Beam diameter
0.7mm
mm
M squared
typ 1.1
-
≤1
μrad/ºC
Pointing stability
Beam divergence
Diffraction Limited
Mechanical dimensions
Ø12 x 50
mm
Beam position
≤ ± 0.15
mm
Beam angle
≤ ± 0.5
mrad
Connectorized output beam
Single-mode polarization
maintaining fiber
FCP (polarization keyed), FCP8,
APC (polarization keyed and 8
degree polished)
Environmental conditions
Storage temp.
Operating pressure
Operating temp.
Operating humidity
10 to 50
Atmospheric
10 to 40
ºC
ºC
Non-condensing, dew point <20°C
3 of 8
PSM1035_1
*Model specific please contact Qioptiq for details
**Full extension travel on kineMATIX adjustment screws. Typical setting
is 48.5mm(W) x 48.5(H)
Custom OEM versions on request
(1)
iFLEX-iRIS laser with centralized beam exit position
Note: it is possible to attach a kineFLEX fiber delivery system to the iFLEX-iRIS laser with centralized beam exit position.
The kineFLEX can be attached by customers, as a future upgrade option.
64
TY VOID
OVED
30
5
40
WARRAN
IF REM
3
4 MOUNTING HOLES, Ø3.2
15.0
70
WARRAN
IF REM
LASER
APERTURE
15.0
LASER CONTROL I/O
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
CW EMISSION
<500mW 400-410nm
IEC60825-1:2007
19.0
21
38
STATUS
33
7.5
1.0
15
7.5
SERIAL No
63.5
3.0
20.0
20.0
M3x0.5 IN 4 POSITIONS
DOWEL HOLE Ø2.02/2.03 x 3 DEEP
DOWEL SLOT Ø2.02/2.03 x 3 DEEP
iFLEX-iRIS electrical interface
1
8
15
PinFunction
1
Monitor Photodiode Output (Vmon)
2
Operating Current Output (Vop)
3
External Power Control
4
Laser Enable
5
Temperature OK Signal
6Reserved
7
Laser Supply Voltage
8Reserved
9Reserved
10Reserved
11
Chassis Ground
12
Digital Modulation Input
13Reserved
14
0V Laser Supply
15
0V Signal Return
Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs.
4 of 8
PSM1035_1
9
(2)
iFLEX-iRIS laser with offset beam exit position
Note: the kineFLEX fiber delivery system cannot be fitted directly to the iFLEX-iRIS laser with offset beam exit position.
64
TY VOID
OVED
30
5
40
WARRAN
IF REM
3
4 MOUNTING HOLES, Ø3.2
WARRAN
IF REM
70
LASER CONTROL I/O
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
CW EMISSION
<500mW 400-410nm
IEC60825-1:2007
19.0
21
38
33
STATUS
SERIAL No
1.0
15
63.5
3.0
15.5
15.5
LASER APERTURE
DOWEL HOLE Ø2.02/2.03 x 3 DEEP
DOWEL SLOT Ø2.02/2.03 x 3 DEEP
iFLEX-iRIS electrical interface
1
Other industry footprints and beam offsets may be
available. Please contact Qioptiq Sales for details.
8
15
PinFunction
1
Monitor Photodiode Output (Vmon)
2
Operating Current Output (Vop)
3
External Power Control
4
Laser Enable
5
Temperature OK Signal
6Reserved
7
Laser Supply Voltage
8Reserved
9Reserved
10Reserved
11
Chassis Ground
12
Digital Modulation Input
13Reserved
14
0V Laser Supply
15
0V Signal Return
Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs.
5 of 8
PSM1035_1
9
(3)
iFLEX-iRIS laser with fiber coupled output
This iFLEX-iRIS includes a kineFLEX single-mode polarization maintaining fiber delivery system.
Please refer to the kineFLEX datasheet for full details of all standard options. Please contact Qioptiq Sales to discuss any
Ø12.0
customized outputs or beam shaping required.
50.0
FIBER ASSY.
SERIAL No
SERIAL
TY VOID
OVED
30
40
WARRAN
IF REM
4 MOUNTING HOLES, Ø3.2
64
WARRAN
IF REM
142
LASER CONTROL I/O
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
CW EMISSION
<500mW 400-410nm
IEC60825-1:2007
19.0
21
38
33
STATUS
SERIAL No
1.0
63.5
3.0
20.0
20.0
15
iFLEX-iRIS electrical interface
1
DOWEL HOLE Ø2.02/2.03 x 3 DEEP
DOWEL SLOT Ø2.02/2.03 x 3 DEEP
8
15
PinFunction
1
Monitor Photodiode Output (Vmon)
2
Operating Current Output (Vop)
3
External Power Control
4
Laser Enable
5
Temperature OK Signal
6Reserved
7
Laser Supply Voltage
8Reserved
9Reserved
10Reserved
11
Chassis Ground
12
Digital Modulation Input
13Reserved
14
0V Laser Supply
15
0V Signal Return
Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs.
6 of 8
PSM1035_1
9
iFLEX-iRIS CDRH compliant interlock unit
For CDRH compliance a bench top standalone laser system must be used with a CDRH compliant interlock unit power supply.
Qioptiq is pleased to offer this iFLEX-iRIS CDRH compliant interlock unit for use with the iFLEX-iRIS laser systems.
Note: The iFLEX-iRIS CDRH compliant interlock unit includes keyswitch, interlock plug, remote interlock switch and power
supply. This CDRH compliant interlock unit is recommended for bench top use.
~40cm CORD
31mm
131mm
82mm
End panel views of the iFLEX-iRIS™ interlock control unit detailing the location of the different connectors and indicators
iFLEX-iRIS OEM power supply
When iFLEX-iRIS lasers are integrated into OEM instrumentation then power may be supplied directly from the instrument
or from an OEM power supply. Qioptiq is pleased to supply this OEM power supply for the iFLEX-iRIS and iFLEX2000 laser
systems.
1.35m ±0.05
7 of 8
PSM1035_1
C INC ON E L E C T R ONIC S C O.,L T D.
C A UT ION:
A C A DA P T E R
011626
FERRITE
iFLEX – iRIS – X0 -
- 0.7 -
-
iFLEX-iRIS
Adaptor Cable
Laser Wavelength (nm)
This
allows
an iFLEX-iRIS
Beam
Diameter
(mm) to be installed in place of an iFLEX2000, as a retrofit laser system.
iFLEX – iRIS – X0 - 0.7 Laser Power (mW)
Laser Wavelength (nm)
Operating mode
(CW = NP,
Digital modulation = T)
iFLEX-iRIS
Order
Codes
Beam Diameter (mm)
Laser Power (mW)
iFLEX – iRIS – X0 - 0.7 Operating mode (CW = NP, Digital modulation = T)
Laser Wavelength (nm)
-
Beam Diameter (mm)
Laser Power (mW)
iFLEX – iRIS – X2 - 0.7 Operating mode (CW = NP, Digital modulation = T)
Laser Wavelength (nm)
Beam Diameter (mm)
iFLEX – iRIS – X2 - 0.7 Laser Power (mW)
Laser Wavelength (nm)
Operating mode (CW = NP, Digital modulation = T)
Beam Diameter (mm)
Laser Power (mW)
iFLEX – iRIS – X2 - 0.7 Operating mode (CW = NP, Digital modulation = T)
Laser Wavelength (nm)
-
-
-
Beam Diameter (mm)
iFLEX
- iRIS (mW)
- P Laser Power
-
-
-
-
SM
PM Fiber
type(CW = NP, Digital modulation = T)
Operating
mode
Fiber length (m)
iFLEX - iRIS
- P Laser Wavelength (nm)
SM PM Fiber type
Fiber output (0.7mm, FCP, FCP8 or APC)
Fiber length (m)
Laser power after fiber (mW)
Laser Wavelength (nm)
iFLEX - iRIS
P =- NP, Digital modulation
-= T)
Operating
mode- (CW
Fiber output (0.7mm, FCP, FCP8 or APC)
SM PM Fiber type
Laser power after fiber (mW)
These
lasers are
Fiber length
(m)designed and manufactured in a factory with ISO9001:2008 certification. These lasers are CE certified.
Operating
= NP, Digital modulation
= T)
These
lasersmode
meet (CW
the requirements
for IEC60825.
Only lasers used with the CDRH compliant interlock unit meet CDRH
Laser
Wavelength
(nm)
requirements. The fiber optic output can increase laser hazard. Please follow recommended laser safety guidelines when
using
lasers.
iFLEX-iRIS-P
the
iFLEX-iRIS laser with kineFLEX fiber delivery including kineMATIX-P2 fiber coupler.
Fiber these
output
(0.7mm,
FCP, FCP8isor
APC)
Laser power after fiber (mW)
Qioptiq Photonics Ltd.
[email protected]
phone +44 (0) 2380 744 500
www.qioptiq.com
iFLEX-iRIS™ is a trademark of Qioptiq Photonics Ltd. Copyright ©2014 Qioptiq Photonics Ltd.
VISIBLE AND INVISIBLE LASER
RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
<500mW
IEC60825-1:2007
VISIBLE AND INVISIBLE LASER
RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
>500mW
IEC60825-1:2007
8 of 8
PSM1035_1
technical
information
contact:= T)
Operating modeFor
(CW
= NP, Digital
modulation