Download User`s Manual Template
Transcript
5.0 Using the System (Batch) #!/bin/sh bbkeys & sudo chmod 777 -R /opt/SignagePlayer/share/linux sudo xterm -geometry 60x40+10+10 /opt/SignagePlayer/share/linux/signageController.sh & sleep 3 /usr/bin/blackbox The Black Box startup config file (.bbstartup) will launch the signageController.sh which is the proper (and only) way of executing the Digital Signage and Kiosk presentation. The signageController.sh script is responsible for launching the SignageController and the SignagePlayer. It also maintains the health status of the SignageController and validates the integrity of all running processes. The SignagePlayer installation resides in /opt/SignagePlayer The SignagePlayer Linux configuration resides in /opt/SignagePlayer/share/linux Cached content resides in /opt/SignagePlayer/share/buisnessXXX where XXX is your business account number. The Linux environment comes with several command line aliases. These aliases are quick shortcuts which can be execute from any open terminal. sign_run sign_cd sign_unregister sign_clear sign_showActive sign_time sign_vnc 4.5 = runs the Signage shell startup script = change to SignagePlayer Linux directory = unregister the account and clear all cached cookie info = remove all cached content = print all active signage relayed processes = configure timezone = enable remote management using vnc server HDMI Sound The Ubuntu mediaBOX is pre configured with standard audio through the back green mini jack output port. In order to enable HDMI sound through the HDMI port you should follow these steps: 1. Right click on the desktop and run Terminal 2. Run the command sign_hdmi 3. Reboot the mediaBOX Once rebooted all sound controls should work through the HDMI port. The reverse procedure will reset the audtio back to the standard mini jack port. Advanced HDMI sound control can be managed through the: sudo alsamixer command (for advanced users only). ‘ User’s Manual