Download User`s Manual(current)

3. Design the Graphic User Interface
We can skip this step.
Here we just demonstrate how to quickly complete a whole new project
with I/O modules of ICP DAS.
4. Design the Ladder Diagram
Press F3 key or click on “Register Devices” of the “HMI” menu to
evoke the “Devices” window to register PET-7060.
Refer to section “Connect to I/O Modules” in the chapter 4 for details.
Then pick up the picture which represents the tag. Drag and drop the
tag that is corresponding to the DO0 of PET-7060 to the frame design
space. On the frame design space, the picture you just pick is now on
the frame.
TouchPAD User Manual, version 1.0.5. Last Revised: March 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
Page: 178
 E-mail: [email protected]