Download DLK641 Plus

A P P E N D I X
1
Use in alarm system
If you have alarm system equipped with alarm panel armed by zone triggering, you
can use DLK-641Plus stand-alone access control unit for setting/unsetting your alarm
system. The wiring for this implementation is shown below. Codes or proximity cards
driving Relay 1 are utilized for access to the premises control and codes or proximity
cards driving Relay 2 are used for setting/unsetting. LED 3, will show set/unset state
of your alarm system.
+12V GND RTE DC GND
SAB
ALM CM1 NC1 NO1 CM2 NC2 NO2
System
setting/unsetting
input connection
System devices
Tamper contacts
connection
Power
supply
+12 V
RTE
26
Door
sensor
Integrated Technical Vision Ltd
Outer system
input
connection
http://www.itvsystems.com.ua