Download USER MANUAL - BCH Electric Limited

5. Programming keypad
 The above setting is also applied to change parameter values in function group 2 and I/O
group.
5.6
Monitoring of operation status
Monitoring output current in drive group
Drive group
1
2
3
4
-. In [0.0], continue pressing the Up () or Down () key until [Cur] is displayed.
-. Monitoring output current is provided in this parameter.
-. Press the Prog/Ent () key once to check the current.
-. Present output current is 5.0 A.
-. Press the Prog/Ent () key once to return to the parameter name.
-. Return to the output current monitoring code.
 Other parameters in drive group such as dCL (Inverter DC link current) or vOL (Inverter output
voltage) can be monitored via the same method.
5-10
SINUS N