Download GLX Lighting PLB

GLX LIGHTING
POWER LED BEAM 56 NARROW
Replacing the fuse
Only replace the fuse by one of same type and rating. Before replacing the fuse, unplug the PLB-56N!
Step 1: Open the fuse holder on the rear panel with a fitting screw driver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder
Step 4: Remount the fuse holder in the housing
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaces by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.
Technical Specifications
LIGHT SOURCE
LED
Illuminance @ 1 m
Beam Angle
108 X 10mm (25 red, 25 green, 25 blue)
2550 lux @1meter
25°
CONTROL & PROGRAMMING
Data input
Data output
Data pin configuration
Protocols
Channels
locking 3-pin XLR male socket
locking 3-pin XLR female socket
pin 1 shield, pin 2 (-), pin 3 (+)
DMX-512
7
POWER
Auto-switching power supply
Power consumption
Fuse
100V~240 VAC, 50/ 60Hz
22w
20mm 2A fast blow
WEIGHT & DIMENSIONS
Length
Width
Height
Weight
210mm
220mm
230mm
1,2kg
8