Download Installation & Operating Instructions

2.
2.
For the installer
For the installer
2.1 Scope of delivery, packaging
2.1.1
Boiler
The boiler is supplied on a wooden pallet covered with a plastic sack
– Fig. 3. The cladding parts are in a separate cardboard box. Cleaning
tools are packed in the combustion chamber and the ash chamber.
In addition, the pellet feed unit is packed in several cardboard boxes.
2.1.2
78
0
Optional accessories
MES system control, motorised mixing valve, mixer groups, heating
distributor, thermal discharge safeguard, stainless steel flue accessory, combi energy-saving intake regulator with explosion flap EEX
(EZR for Germany)
1790
Accessories for boiler
Accessories for fully-automatic pellet feed
– Fully automated changeover unit with/without fire protection collars including 3x suction probes
– Fully automated changeover unit with/without fire protection unit
including 8x suction probes and masonry feed-through
– Fastening clips for delivery hose (pack of 6)
– Delivery hose with flexible earth leads, DN 50/25 m (supply and
return air hoses)
97
5
– Connecting piece for return air hose
Fig. 3
Installation dimensions – BioWIN XL
Accessories for storage room
– Filling coupling set NW 100 mm (2 Storz A couplings with 0.5 m pipe, incl. fastening material) – with blockable
blind covers
– Z-brackets (2x 2 m) incl. bolts and dowels for storage room door
– Plastic baffle plate (1500 x 1500 x 2 mm) incl. fastening material for storage room
– Fire protection collars (2x) incl. masonry attachment
– Pipe clamp for earthing the filling and return air lines Ø 100 mm and attaching them to the wall
– Pipes and bends (natural aluminium) for extending the filling and return air pipes Ø 100 mm.
Pellet storage rooms
– Sheet steel tank with volume of 2.3 to 9.6
– Fabric tank with volume of 2,1 to 6,1 t
6