Download MVI56E-MNET / MNETXT

MVI56E-MNET / MNETXT ♦ ControlLogix Platform
Modbus TCP/IP Interface Module
Reference
User Manual
Controller Tags
The MNET.UTIL.CmdControl controller tag array holds all the values needed to
create one Command Control block, have it sent to the module, and control the
processing of the returned response block.
Controller Tag
TriggerCmdCntrl
NumberOfCommands
CommandIndex[x]
CmdsAddedToQueue
CmdControlBlockID
CmdCntrlPending
ProSoft Technology, Inc.
April 23, 2014
Description
Set this tag to 1 to trigger the execution of a command after all the
other parameters have been entered.
Enter a decimal value representing the quantity of commands to be
requested in the Command Control block (1 to 6).
Enter the ROW NUMBER of the command in the MNET Client 0
Command List in Prosoft Configuration Builder minus 1. This is a
six-element array. Each element holds one Command Index.
Returned decimal value representing the quantity of commands
added from the MNET Client 0 Command List to the command
priority queue by the most recent Command Control block.
Temporary variable that provides block ID of the Command Control
block most recently processed by the module.
Temporary variable used to prevent a new Command Control block
from being sent to the module until the previously sent Command
Control block has been completely processed and a response block
has been returned.
Page 125 of 181