Download MVI56E-MNET / MNETXT
Transcript
MVI56E-MNET / MNETXT ♦ ControlLogix Platform Modbus TCP/IP Interface Module 5.8 Reference User Manual Using the Sample Program If your processor uses RSLogix 5000 version 15 or earlier, you will not be able to use the Add-On Instruction for your module. Follow the steps below to obtain and use a sample program for your application. 5.8.1 Opening the Sample Program in RSLogix The sample program for your MVI56E-MNET module includes custom tags, data types and ladder logic for data I/O, status and command control. For most applications, you can run the sample program without modification, or, for advanced applications, you can incorporate the sample program into your existing application. Download the manuals and sample program from the ProSoft Technology web site You can always download the latest version of the sample ladder logic and user manuals for the MVI56E-MNET module from the ProSoft Technology website, at www.prosoft-technology.com/prosoft/support/downloads (http://www.prosofttechnology.com/prosoft/support/downloads) From that link, navigate to the download page for your module and choose the sample program to download for your version of RSLogix 5000 and your processor. To determine the firmware version of your processor Important: The RSLinx service must be installed and running on your computer in order for RSLogix to communicate with the processor. Refer to your RSLinx and RSLogix documentation for help configuring and troubleshooting these applications. 1 2 3 Connect an RS-232 serial cable from the COM (serial) port on your PC to the communication port on the front of the processor. Start RSLogix 5000 and close any existing project that may be loaded. Open the COMMUNICATIONS menu and choose GO ONLINE. RSLogix will establish communication with the processor. This may take a few moments. ProSoft Technology, Inc. April 23, 2014 Page 163 of 181