Download MATCHMAKER Co
Transcript
Matchmaker™ Co-IP Kit User Manual VI. In vitro Coimmunoprecipitation continued 30 min. If your gel is thicker than 0.75 mm, extend the fixation time to 45 min. 18.Rinse the gel with H2O, then add Amplify Fluorographic Reagent according to the manufacturer’s instructions. Place on a rotary shaker for 20 min at room temperature. 19.Lay the gel onto pre-wetted Whatman 3MM paper. Cover with Saran wrap, and dry at 80oC under constant vacuum. 20.Remove Saran wrap, and expose the gel to a phosphorimaging screen or X-ray film overnight at room temperature. Note: Some X-ray films such as Kodak BioMax MR are coated on a single side. Make certain the gel directly contacts the emulsion side of the film. 21.Develop the screen or film using standard techniques. 22.Check the results of your Positive Control (p53/large T-antigen) Co-IP against those shown in Appendix A. Protocol No. PT3323-1 www.clontech.com Version No. PR631435 Clontech Laboratories, Inc. 15