Download The UV Curing System - Multice & Co., Ltd.
Transcript
Ordering Information Ratings and Characteristics Head Unit Multi-function model ZUV-C30H Value model Model Wavelength Light source Class Vibration tolerance Drop impact resistance Ambient temperature range Ambient humidity range Degree of Protection rellortnoC ZUV-C20H Mega-power head ZUV-H20MB ZUV-H30MB NEW tinU daeH MB Series Value model Material Diffuse illumination head ZUV-H25MB ZUV-H35MB Weight (after packing) Value model Accessories Operating: 5 to 35¡C; Storage: -10 to +60¡C (with no condensation or icing) Operating/storage: 30% to 85% (with no condensation or icing) IEC60529 IP40 ZUV-H20MB/25MB:Zinc, aluminum, glass ZUV-H30MB/H10MB/H35MB:Zinc, copper, aluminum, glass ZUV-H20MB/H25MB:Approx. 185g (Main unit: approx. 100g), ZUV-H30MB/H35MB:Approx. 150g (Main unit: approx. 55g), ZUV-H10MB:Approx. 180g (Main unit:approx. 105g) Operation manual, clamp (with M3 thread), warning label (English) * Models are also available with a 385-nm light source wavelength. (ZUV-H21MB/H11MB/H26MB) ¥ Separate Lens Unit required ¥ Separate Lens Unit required ¥ Cable length: 2m ¥ Cable length: 0.3m ¥ Max illumination of ¥ Max illumination of 9400mW/cm2 with 2 beam 9400mW/cm2 with 2 beam dia. dia. Spot lens Ultra light focus lens Line beam lens ZUV-L3H/L4H/L6H/L8H/L10H ZUV-L2H ZUV-L12L NEW tinU sneL Ultra cooling head ZUV-H10MB *1 ZUV-H20MB/H30MB/H10MB/H25MB/H35MB 365nm * Class 3B (JIS C 6802 2005) Class 3B (EN60825-1: 1994 +A1: 2002 +A2: 2001) 10 to 150 Hz acceleration 50 m/s2, half amplitude 0.35 mm, X/Y/Z direction 8 minutes each 10 times 150 m/s2, 6 directions (up/down, right/left, front/back) 3 times each ¥ Spot dia.: ¿3mm ¥ ZUV-L3H ¿4mm ¥ ZUV-L4H ¿6mm ¥ ZUV-L6H ¿8mm ¥ ZUV-L8H ¿10mm ¥ ZUV-L10H ¥ Spot dia.: ¿2mm ¥ ZUV-L12H ¥ Beam width : 12mm ZUV-L12L ¥ Separate Lens Unit required ¥ Cable length: 0.3m ¥ Max illumination of 9400mW/cm2 with 2 beam dia. Narrow radius lens ZUV-L6T/L8T ¥ Spot dia.: ¿6mm ¥ ZUV-L6T ¿8mm ¥ ZUV-L8T *1 Models are also available with 2-m cables. (ZUV-H10MB 2M) ¥ Separate diffusing lens required ¥ Cable length: 2m ¥ Max illumination of 690mW/cm2 with 12 beam dia. ¥ Separate diffusing lens required ¥ Cable length: 0.3m ¥ Max illumination of 690mW/cm2 with 12 beam dia. Side-view lens *2 Diffusing lens ZUV-L3S/L4S/L6S/L8S ZUV-L12H NEW ¥ Spot dia.: ¿3mm ¥ ZUV-L3S ¿4mm ¥ ZUV-L4S ¿6mm ¥ ZUV-L6S ¿8mm ¥ ZUV-L8S ¥ Spot dia.: ¿12mm ¥ ZUV-L12H Extension Cable ZUV-XC2B/XC5B/XC10B ¥ For extending length between Controller and Heads ¥ Cable length: 2m ZUV-XC2B 5m ZUV-XC5B 10m ZUV-XC10B *2 When using ZUV-H25MB/H35MB diffuse illumination head with side-view lens, we recommend using ZUV-L3S/L4S. Ratings and Characteristics Controller Model Constant Irradiation irradiation method Pattern irradiation No. of settings Cumulative illumination summation Terminalxx Inputs block I/O Outputs ZUV-C20H (Value model) irradiation Illumination power (0% to100%), illumination time (max. 99.9sec/unlimited) Unavailable Illumination power (0% to 100%), irradiation time (999.9 s max.) No bank feature 16 banks ZUV-C30H (Multi-function model) Can be set to step or ramp (linear) 16 points specified per setting) Energy (display unit - J) stop, Start/stop UV illumination (4 channels), Emergency shutdown, UV illumination start/stop (All channels/4-channel) Emergency Select settings (banks) Ready (4 channels), UV illuminating, errors Ready output (all-channels/4-channel), error output, operating Start/stop UV irradiation (4 channels), select settings (banks), RS-232C and USB I/O None get/change settings data, save/read data, power tuning Cooling method Fan air cooling Air cooled (no fan) Select AC or DC power supply AC power only ¥ AC power supply: 100 to 240 V AC±10%, 50/60 Hz (AC adapter included) Power supply voltage 100V-240V AC ± 10%, 50/60 Hz (AC adapter attached) ¥ DC power supply: 24 V DC±10% (supplied from terminal block on back of Unit) ¥ With AC adapter: 2.3 A (55W) Current consumption 1.4A (53W) ¥ With DC power supply: 1.9 A (45W) 10 to 150 Hz acceleration 50 m/s2, half amplitude 0.35 mm, X/Y/Z direction 8 minutes each 10 times Vibration tolerance Drop impact resistance 150 m/s2, 6 directions (up/down, right/left, front/back) 3 times each Ambient temperature range Operating: 5 to 35¡C; Storage: -10 to +60¡C (with no condensation or icing) Operating/storage: 30% to 85% (with no condensation or icing) Ambient humidity range IEC 60529 IP20 Degree of protection Polycarbonate, SECC SUS, aluminum Material Approx. 1,800g (Controller only: approx. 1,200g) Approx. 2,950g (Controller only: approx. 1,900g) Weight (package) Accessories Time (unit: 100 hour display) Instruction sheet, Key, AC adapter Lens Unit Model Vibration tolerance Drop impact resistance Ambient temperature range Ambient humidity range Degree of Protection Material Weight (after packing) ZUV-L2H/L3H/L4H/L6H/L8H/L10H/L12L/L6T/L8T/L3S/L4S/L6S/L8S/L12H 10 to 150 Hz acceleration 50 m/s2, half amplitude 0.35 mm, X/Y/Z direction 8 minutes each 10 times 150 m/s2, 6 directions (up/down, right/left, front/back) 3 times each Operating: 5 to 35¡C; Storage: -10 to +60¡C (with no condensation or icing) Operating/storage: 30% to 85% (with no condensation or icing) IEC60529 IP40 Aluminum, glass Accessories Operation manual Head Unit model Lens Unit model Spot diameter/Beam shape Recommended working distance Peak illumination *1 ZUV-H20MB/H30MB/H10MB ZUV-L3H ZUV-L2H 2mm dia. 3mm dia. ZUV-L4H 4mm dia. ZUV-L6H 6mm dia. ZUV-L8H 8mm dia. ZUV-L10H 10mm dia. ZUV-L12L 12 ✕ 2mm 10mm 11mm 14mm 15mm 15mm 30mm 15mm 9400mW/cm2 6900mW/cm2 5300mW/cm2 3700mW/cm2 1800mW/cm2 400mW/cm2 460mW/cm2 *2 Head Unit model Lens Unit model Spot diameter/Beam shape Recommended working distance Peak illumination *1 ZUV-H20MB/H30MB/H10MB ZUV-L8T ZUV-L6T 1.5mm dia. 3mm dia. ZUV-L3S 3mm dia. ZUV-L4S 4mm dia. ZUV-L6S 6mm dia. ZUV-L8S 8mm dia. 6mm 9mm 4mm 5mm 8mm 13mm 5800mW/cm2 4600mW/cm2 6100mW/cm2 5300mW/cm2 3700mW/cm2 2000mW/cm2 Head Unit model Lens Unit model Spot diameter/Beam shape Recommended working distance Peak illumination *1 ZUV-H25MB/H35MB ZUV-L3S ZUV-L12H 12mm dia. 3mm dia. ZUV-L2H/L3H/L4H/L6H/L8H/L10H:Approx. 10g (Main unit: approx. 5g), ZUV-L12L:Approx. 30g (Main unit: approx. 5g), ZUV-L6T:Approx. 35g (Main unit: approx. 7g), ZUV-L8T:Approx. 40g (Main unit: approx. 10g), ZUV-L3S/L4S/L6S/L8S:Approx. 35g (Main unit: approx. 5g), ZUV-L12H:Approx. 30g (Main unit: approx. 5g) 30mm 690mW/cm ZUV-L4S 4mm dia. 8mm 2 3300mW/cm 13mm 2 1500mW/cm2 *1 Under the following conditions: 100% irradiation, 25¡C room temperature and with heat sink. Values for reference only. *2 Illumination is the value at a 15-mm working distance and in a 12 ✕ 2-mm beam shape range. Instruction sheet, Key, AC adapter, CD-ROM (USB driver, user's manual PDF) 10 11