Download Recording submasters
Transcript
Moving a link Use [S7], Move Link, to renumber a link or a group of links. All links in a group will be renumbered sequentially. To move a link to an empty space on the Link List, follow these steps: Keystrokes: Action: 1. Press [Setup] [1][1] [Enter]. Selects Channel Attributes display 2. Press [S7], Link List. Selects Link List display Prompt reads: Select link number 3. Press [S7], Move Link. Prompt reads: Select link number(s) to move, then press ENTER To cancel, press CLEAR. 4. Press [6] [Enter]. Prompt reads: To move selected link(s), select target link and press ENTER To cancel, press CLEAR 5. Press [9] [Enter]. Link 6 is renumbered as link 9 Merging two links If you move a link to a space on the Link List which already contains a link, the channels in the moved link are added to the existing link. To move a link to an occupied space on the Link List, follow these steps: Keystrokes: Action: 1. Press [Setup] [1][1] [Enter]. Selects Channel Attributes display 2. Press [S7], Link List. Selects Link List display Prompt reads: Select link number 3. Press [S7], Move Link. Prompt reads: Select link number(s) to move, then press ENTER To cancel, press CLEAR. 4. Press [6] [Enter]. Prompt reads: To move selected link(s), select target link and press ENTER To cancel, press CLEAR 5. Press [7] [Enter]. Prompt reads: Link already exists – To confirm, press ENTER To cancel, press CLEAR 6. Press [Enter]. The channels in link 6 are added to the channels in link 7 Note: To split a link apart, create a new link with the channels you want to move. Since a channel can only be in one link at a time, it will be deleted from the original link and recorded in the new link. Express two scene preset User Manual 241