1
Download Adaptable User Interface Generation
Transcript
8.2 Validating Dynamic Field Width Feature 8.2.1 Before Adaptation Figure 27 shows the field widths before adaptation for this feature. Figure 27. Screen Display before Adaptation for Dynamic Field Width As can be seen in Figure 27, even though the values for the parameters Fwd Link Traffic Chan Freq, Reference Level, Beam 1 Level, Beam 2 Level and Nose Level have fewer digits than their values in Figure 1, the field width of the parameters remains the same as before. This may or may not be desirable in some cases. 8.2.2 After Adaptation Using the architecture of Figure 21, the screen looks like Figure 27. As can be seen the parameters field width has adapted to their new sizes.
