Download C-2070E - DEN-SIN

Transcript
3. Maintenance and troubleshooting
Cylinder
Valve Cartridge
Back Plate
7) Slide the cylinder (700680061) forward; ensure that the plunger(700680111) is clear
of the back plate (700680084) before lifting and removing the cylinder (700680061).
8)Once outside, pull out the plunger (700680111) from the back of the
cylinder(700680061). Inspect the plungers for scratches, grooves and pitting replace if
necessary.
9) Remove the Throat bushing (700680007) and packing spring (700680059) from the front
but leave the packing adaptor (700680008) inside the cylinder (700680061).
10) Knock out the remaining packing assembly (7006800053 7006800113 700680032
700680008) with the packing removing tool (Order part no: 700953510) or with a piece of
plastic rod or suitable piece of round wood from the front of the cylinder.
`
11) Inspect the throat bushing(700680007) packing adaptor (700680008), back-up ring
(700680005) and support ring(700680110) for wear, replace if necessary. Packing
(700680110; 700680032) should be replace with every dismantling
C-2070E
V-00
-22-