Download BeatMaker v1.0.2 - UserManual

• CROSS CC
The CrossCC is a customizable control surface where you can interact with two parameters at the same time.
Control the volume, pan, tone and effects on any pads.
Configure both axis: X axis (horizontal) and Y axis (vertical).
Modify one or multiple pads at once, according to the current selection.
Basic controls :
- Press full-screen
button for a better
view.
- Access the miniature
CrossCC to trigger
samples and control
their parameters live.
The fullscreen mode provides more precision
while controlling the CrossCC.
See the current X and Y parameter values
while changing them.
When controlling an effect parameter, a handy
bypass button will be shown to activate the
associated effect.
To setup the CrossCC:
- Presets: Pop-up preset browser to access a
list of predefined presets. Scroll through the list,
select the desired preset and press APPLY.
- X axis: Configure the X axis parameters .
NOTE: The button displays the current active parameter.
- Y axis : Configure the Y axis parameters.
User manual for version 1.3.7 - all rights reserved - non-binding document
20