Transcript
NU-FRD1 Ford/Lincoln/Mercury Navigation Unlock Integration Interface VPW Arbitration Class 2 J1850 Class 2 EOD J1850 CRC 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0 Class 2 10 1 00 00 01 11 11 10 01 11 11 11 10 00 01 10 00 01 11 10 01 11 10 00 0 J1850 Class 2 111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0 The NU-FRD1 is a Navigation Unlock integration interface that allows the factory navigation features of your Ford/Lincoln/Mercury radio or the reverse camera to be used by the passenger at anytime. Installation & Operation Installation: Disconnect the 24-pin and 16-pin harness from the back of the radio. Plug the male connectors on the NU-FRD1 harness into the 24-pin and 16-pin port on the back of the radio. Connect the factory 24-pin and 16-pin harness into the female connectors on the NU-FRD1 harness.Plug the Black micro-fit 24-pin connector on the NU-FRD1 harness into the NU-FRD1. Operation: Press the “Phone” button on the steering wheel controls (SWC) twice to activate the NU-FRD1. The navigation screen will display “Turn On Navigation Unlock”. Press the “Yes” icon. The navigation screen will then display “Confirm Safe Passenger Use”. Press the “Yes” icon to acknowledge “safe use”, agreeing that use will be performed only by the passenger whenever the vehicle is in motion, and activate the NU-FRD1. To de-activate the NU-FRD1 simply press the “Phone” button on the SWC twice. The navigation screen will display “Navigation Unlock Deactivated”. To activate the Reverse Camera Unlock feature, press the “Phone” button on the SWC twice. When the navigation screen displays “Turn On Navigation Unlock” press the “No” icon. The navigation screen will then display “Turn On Reverse Camera Unlock”. Press the “Yes” icon. The navigation screen will then display “Confirm Safe Passenger Use”. Press the “Yes” icon to acknowledge “safe use”, agreeing that use will be performed only by the passenger whenever the vehicle is in motion, and activate the reverse camera unlock. To de-activate the reverse camera unlock simply press the “Phone” button on the SWC twice. The navigation screen will display “Reverse Camera Unlock Unlock Deactivated”. WARNING: In order to avoid distraction, which could lead to an accident, the driver should never utilize systems unlocked by the NU-FRD1 when the vehicle is in motion. Even when operated by the passenger, the vehicle driver should maintain their attention on the road at all times. NU-FRD1 Controls Connection Diagram NU-FRD1 Ford/Lincoln/Mercury Universal Navigation Unlock Interface To Vehicle NUFRD1 Harness To Factory Radio Navigation Unlock 1. Press Phone Button Twice 2. Screen Displays Turn On Navigation Unlock 3. Press Yes 4. Screen Displays Confirm Safe Passenger Use 5. Press Yes 6. Press Phone Button Twice to De-Activate Press Twice to Enable/Disable Navigation Unlock Reverse Camera Unlock + - VOL MEDIA 1. Press Phone Button Twice 2. Screen Displays Turn On Navigation Unlock 3. Press No 4. Screen Displays Turn on Reverse Camera Unlock 5. Press Yes 6.Screen Displays Confirm Safe Passenger Use 7. Press Yes 8.Press Phone Button Twice to De-Activate Installation/Compatibility Notes 1. The 2009 Lincoln MKS does not support the navigation unlock feature; only the reverse camera unlock will function in this vehicle. 2. It is reccomended that you set the Reverse Camera delay setting to Off for optimal performance. 3. If you are installing this interface in conjunction with a uPAC or aPAC module, the NU-FRD1 must be plugged into the the radio, then the uPAC or aPAC, then the vehicle harness. DISCLAIMER: Under no circumstances shall the manufacture or the distributors of the NU-FRD1 be held liable for claims of any loss or damage, consequential, direct or indirect, arising from the sale, installation, or use of the NU-FRD1. The manufacture and its distributors will not, nor will they authorize any representative or any other individual, to assume obligation or liability in relation to the NU-FRD1 other than its replacement. AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use above and with all State and Federal laws. PAC provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in conformity with those instructions or other misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger use only. 10-14-09 Pacific Accessory Corporation - Santa Ana, CA 92705 [email protected] • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com