Download User Manual - DiTranslator

3.1 Configuring a Network Installed Using the
Asynchronous Network Collection
Before a network can be used to send or receive mail, it must be configured. The configuration of a
network is somewhat different for each kind of asynchronous network connection. For this reason,
there is a unique Network Help file for each different network. The following instructions will tell
you how to access your network specific online help documentation, and network configuration
screens.
1. Configuration can be done at the end of installation (in this case, continue with Step 2), or at
any other time by right-clicking on the desired network icon (in the Networks & the Internet
window), and selecting Properties.
The Network Wizard is displayed.
2. Click Network Help for specific information about the network you installed. Use the
information in the “…Configure the Network Connection” topic of the “How To…” section to
assist you with configuring the network. You may print the current topic by selecting Print
Topic from the File menu. Select Exit from the File menu to return to the Network Wizard.
3. On the Network Wizard screen, click the Configuration button to access a series of
communication configuration screens. From here, use the Help buttons and your online
Network Help information (from the previous step) to assist you in completing these
screens.
After you have entered configuration information for your network, you will see a check
mark next to the Configuration button meaning that your network is ready for use.
3.2 Configuring a Custom Network
Before a network can be used to send or receive mail, it must be configured.
51