Download User Manual

Set to yes to enable blocking of I>>>.
D (.
2
Set to yes to enable blocking of Io>.
D (.
2
Set to yes to enable blocking of Io>>.
D (.
2
D (. !
Set to yes to enable blocking of Thermal Overload.
8
2
If TCS (trip circuit supervision) is selected, the following menu is displayed:
"6
Set the value for the time delay of TCS. TCS alarm triggers when the
input is deactivated for longer than the time delay. TCS function is
9 enabled when the trip contact output (RL1) is not energized.
)
Input 2 Menu has similar content as Input 1 menu. The settings are applied to input 2.
OUTPUT Menu
Heading of OUTPUT menu. Press Enter to enter submenu content.
3 81 >1
Output Relay 1
3
Heading of output relay 1 menu. Press Enter to enter submenu content.
)
)
Set the function of output Relay 1. Note that Relay 1 function is
locked to Trip.
$&'(
Set the reset method of relay: Auto (Unlatched), Manual (Latched).
9
&
Assign I> trip to the output relay.
A 9