Download WS1065

INITIALIZING GLOBAL SETTINGS
Initializing Global Settings
You can reset the global radio parameters to their
factory state without losing information stored in the
scanner’s working memory. However, any changes to
the radio’ s global settings will be lost.
NOTE: V-Scanner memory is not affected by this
operation.
To initialize Global settings:
1. Turn off the scanner, then turn it on again.
2. When the Welcome/Ownerscreen appears, press
0. The scanner displays:
System Tests:
Select a Test...
Exits if no key
is pressed
3. Press 2. The scanner displays:
Init GLOB data
To factory state
ENTER if APPROVE
CLEAR to EXIT
4. Press ENT. The scanner displays:
GLOB EEPROM area
Initialized to defaults.
Press any key.
5. Press any key to proceed. The scanner reboots
with default global parameters.
51