Download FSW-K10x LTE UL User Manual

R&S®FSW-K10x (LTE Uplink)
Analysis
Analyzing I/Q Measurements
●
X-axis shows the frequency of the subcarrier
●
X-axis shows the number of the subcarrier
Remote command:
UNIT:​CAXes​ on page 178
Subwindow Coupling
Couples or decouples result display tabs (subwindows).
If the coupling is on and you select another tab in a result display, the application automatically selects the same tab for all result displays
Subwindow coupling is available for measurements with multiple data streams (MIMO).
Marker Coupling
Couples or decouples markers that are active in multiple result displays.
When you turn this feature on, the application moves the marker to its new position in
all active result displays.
When you turn it off, you can move the markers in different result displays independent
from each other.
Remote command:
CALCulate:​MARKer:​COUPling​ on page 178
5.2.4 Markers
Markers are available for most of the I/Q measurement result displays and for the frequency sweep measurements. The functionality (setting and positioning) is the same
as in Spectrum mode.
User Manual 1173.9386.02 ─ 05
79