Download CONTENTS

Transcript
Appendix2 Frequently Asked
SuperDVR & TD Series Cards
Questions
User Manual
therefore try to use one channel display mode when the network speed is
slow.
TIPS
There may be some surplus channels that have no video input. Switching off the
channels is of help to improve transmission speed. (Refer to ‘4.1 Basic Configuration’
about switching on/off channels.)
Appendix 2.3.6 Why I can’t start WebCam server or RPB server?
Possible causes:
Other software is using these ports. If so, please change WebCam ports
configuration or stop other softwares.
Appendix 2.4 Other Questions
Appendix 2.4.1 Why computer display doesn’t work, and why I can’t
access window system?
The capture card may not be well installed. Unplug the card and try it again.
NOTICE
Please unplug the power plug of the computer, so as to avoid damaging the
motherboard chip set.
Appendix 2.4.2 Why I can’t find the recorded files?
HDD space is not enough.
Appendix 2.4.3 Why the screens display is unstable with dithering and
water-wave images?
Possible causes:
Camera electrical power is not enough.
There is external electromagnetic disturbance, or electrostatic disturbance
of camera BNC connector (It’s suggested to connect ground wire to the
connector).
User hasn’t installed necessary VGA driver.
VGA card problem. Try reinstalling the VGA card, or changing another
VGA card.
Appendix 2.4.4 Why does it delay to play back, and it’s slow to close and
open the driver?
Possible causes:
Windows system problem. Try to reboot the computer.
98