Download PBR-310C EBERT Operation Manual

Transcript
Phytrex SERIAL E-BERT
Physical features
Figure 1:PBR-310C E-BERT
The physical features of the PBR-310C E-BERT are shown in Figure. 1.
System
The chassis provides DC power and cooling for the PBR-310. The chassis has LEDs that
indicate the status of the electrical power supply and the fan.
Generator
7
9
23
31
The pattern generator produces PRBS 2 -1, 2 -1,2 -1, 2 -1 patterns NRZ data signal
that can be output to the electrical, or Optical from the front panel. The pattern generator
also outputs the 1/64 data rate clock and trigger signal to facilitate observing the data
signal using an sampling oscilloscope or communication analyzer. The generator has
LEDs indicating the power status of the system.
Analyzer
The electrical or optical signal to be tested for bit errors is provided to the PBR-310 via
the 50Ω SMA connector . Unlike most commercial bit-error-rate testers, the analyzer
does not require externally clock signals .
Power Input Requirement
AC power input requirement is 100~240VAC, 50~60Hz.
8