Download Logic HUI control surface plug

HUI Control Surface plug-in: Requirements
2 Setup
Requirements
To use the HUI control surface plug-in, you need
• a HUI or compatible product
• Logic Platinum 6.0 or newer
Set up: common steps
• Make sure that an XSKey with a Logic Platinum 6 authori•
•
•
zation.
Make sure that your HUI unit(s) are connected bidirectionally with the computer, either using a MIDI interface or the
USB connector built-in to the unit (DM2000, 02R96).
If the unit(s) are connected via USB, make sure that the
MIDI driver which comes with the unit is installed. On Mac
OS 9, you will have to enable OMS in Logic and make sure
that your OMS Studio includes the ports you have
connected your unit(s) to. If not, choose Studio > Add
Devices per Port... in OMS Setup.
Choose menu item Options > Control Surfaces > Install…
Set up: HUI
• For every HUI unit, select HUI in the Install window, choose
Add,
then set the appropriate MIDI In and Out ports in the
Setup window.
Set up: Baby HUI
• For every Baby HUI unit, select HUI in the Install window,
choose Add, then set the appropriate MIDI In and Out ports
in the Setup window.
10
Emagic
HUI control surface plug-in