Download Owner`s Manual - Projector Central

Technical Information
colors with a colorimeter
zAdjusting
z
1) Turn [Advanced color matching] to [On].
2) Select [Test pattern] and press the <SELECT> button.
zzDisplays the test pattern selection screen.
3) Select [Red] (or [Green], [Blue]) from [Measured] and press the <SELECT> button.
zzThe test pattern is displayed.
Test pattern
Measured
Red
Green
Blue
Target
Red
Green
Blue
Cyan
Magenta
Yellow
White
Exit
4) Measure the chromaticity coordinates (x, y) and luminance (Lx) using the
colorimeter.
5) Select [Exit] and press the <SELECT> button.
zzReturn to the advanced color matching setting screen.
6) Enter the value obtained in step 4).
7) Calculate the “L” value from the following formula and enter the value.
Example) Calculate “L” for the measured red value.
Luminance (Lx) of red
Luminance of red + luminance of green + luminance of blue (Lx)
8) Adjust the [Target] value again.
9) Select [Store] to register the adjusted value.
zzWhere required, adjust other projectors in the same way.
Appendix
92 - ENGLISH