Download Operating instructions

SHORT INSTRUCTIONS
Wearing variant shoulder belt
en
About this wearing variant
• axially symmetrical elongation in an upwards direction similar to the procedure with a rod expander
• pulling force varies depending on the position of the upper
part of the body
• pulling force varies depending on the position of the upper
part of the body
• If the penis protrudes over the waistband in an upwards direction, the same should be sufficient to not to inhibit the
elongation procedure.
• For the purposes of privacy a shirt should be worn protruding
over the trousers.
Preparation for application
[!] PeniMaster ® PRO already has to be applied to the penis (see
page 20 et. seq.).
Note:
Normally, when used as a shoulder belt the belt has to be adjusted to a relative short length. The information on the adjustment
of the belt length refers to a body height of approx. 175cm at a
normal weight and has to be adapted individually otherwise.
For this, position conductive buckle A approx. 15 centimetres
from the coupling socket and conductive buckle B another 15
centimetres from the aforementioned.
40
approx. 15 cm
approx.
15 cm
Pre-set the belt length