Download Safety Controller CC-Link Interface Module User`s Manual

CC-Link interface module
MELSEC-WS
4. CC-Link interface module
This chapter describes the CC-Link interface module (WS0-GCC1).
4.1 Overview
The CC-Link interface module is used to connect a MELSEC-WS safety controller to a
Q series programmable controller.
The module can exchange non-safety related data by connecting an external
application (e.g. Q series programmable controller) over CC-Link.
4.1.1
Interfaces and operation
The CC-Link interface module is equipped with a terminal block for CC-Link network
connection.
Figure 2:
Interfaces and display
elements of the
WS0-GCC1
MS LED
Station number setting switch 10
Station number setting switch 1
L RUN/L ERR. LED
Terminal block
SLD
DG
DA
DB
18