Download Safety Controller CC-Link Interface Module User`s Manual
Transcript
Preparing for operation MELSEC-WS 9.3.1 Parameter configuration example This section describes parameter configuration to output data from the WS0-GCC1 to the QJ61BT11N and to input data from the QJ61BT11N to the WS0-GCC1. (1) Configuration required for the WS0-GCC1 The following shows the configuration example using the system configuration of Figure 30. 1) Creating a hardware configuration Read the hardware configuration data from the actual CPU module to Setting and Monitoring Tool or place modules in Setting and Monitoring Tool according to the actual configuration. Figure 33: Hardware configuration dialog 59