Download System Test Plan

System Test Plan
HICS - Home Irrigation Control System
8. Item Pass/Fail Criteria
This section describes in detail how pass and fail criteria for each individual test will be regulated. This
will help our team to identify the acceptable or not acceptable standards for each portion in the system.
It will also clearly define the success or failure of each individual test.
8.1
Hardware Tests
Test ID
H1
H2
Hardware
Raspberry Pi
B+
Arduino
Pass Criteria
•
•
•
•
•
•
Fail Criteria
Store data
Processes HTTP request
Relay commands to the
Arduino
•
•
Interface with sensors
Send sensor values to
Raspberry Pi
Relay commands to the
Relay Switch Module
•
•
•
•
Does not store data
Does not process all
HTTP requests
Does not relay commands
to the Arduino
Does not interface with
sensor
Does not send sensor
values to the Raspberry Pi
Does not relay commands
to the Relay Switch
Module
H3
Soil moisture
sensor
•
Measure the moisture level
of the soil correctly
•
Does not measure the soil
moisture sensor correctly
H4
Temperature
sensor
•
Measure temperature of the
environment correctly
•
Does not measure
temperature of the
environment correctly
H5
Rain sensor
•
Report the rain condition of
the environment correctly
•
Does not report the rain
condition of the
environment correctly
H6
Relay Switch
Module
•
Open/close circuit for all 8
channels
•
Does not open/close
circuit for any channel
Table 8-1 Hardware Tests Criteria
3/30/2015
SmartGrass
61