Download User manual - Dewetron America

Measure
Four step tutorial
1.3
Measure
The Measure can be started by clicking the
FRF tools icon.
The Measure tool bar items
provides a few
basic functions for:
 resetting measurements - Reset (F5): to delete all the measurements
 rejecting last measurement - Reject last (F6): to delete only the last measurement from the result
 stopping the measurement - Stop, which can be restarted by pressing the Measure
 when the data is correctly calculated, FRFs can be taken by pressing Confirm (F9) button.
If the impulse excitation is chosen, make hits to acquire data. Number of averages are shown on the right side with overload
indicator and there are also some controls to monitor hits: Reset average will reset number of averages to zero and Reject
last hit will subtract last measurement from the result.
If more channels are to be measured, go back to the FRF setup, change the point indexes, do another measurement and
Confirm button will add it to all measurement result.
For detailed information see User Guide ® Measure
DeweFRF v6.5 - Tutorials v1.2.0
© 2007 DEWESoft
page
16