Download bdiGDB User Manual

Transcript
bdiGDB for BDI3000 (PowerPC 7440/7450/86xx)
User Manual
21
3.2 Configuration File
The configuration file is automatically read by the BDI after every power on.
The syntax of this file is as follows:
; comment
[part name]
identifier parameter1 parameter2 ..... parameterN ; comment
identifier parameter1 parameter2 ..... parameterN
.....
[part name]
identifier parameter1 parameter2 ..... parameterN
identifier parameter1 parameter2 ..... parameterN
.....
etc.
Numeric parameters can be entered as decimal (e.g. 700) or as hexadecimal (0x80000).
Note about how to enter 64bit values:
The syntax for 64 bit parameters is :
[<high word>_]<low word>
The "high word" (optional) and "low word" can be entered as decimal or hexadecimal. They are handled as two separate values concatenated with an underscore.
Examples:
0x01234567_0x89abcdef
1_0
256
3_0x1234
0x80000000_0
=>>
=>>
=>>
=>>
=>>
0x0123456789abcdef
0x0000000100000000
0x0000000000000100
0x0000000300001234
0x8000000000000000
© Copyright 1997-2015 by ABATRON AG Switzerland
V 1.02