Download ERGO - User Manual

Transcript
ERGO.book Seite 39 Freitag, 1. März 2002 1:09 13
ERGO
Operating ERGO
Recording the Individual Name
Key
Function
9
To branch to the submenu for setting mailbox functions:
Press 9.
2
To record the individual name:
Press 2.
The now possible operational steps are identical with those already
described with the standard mode. See: ”Further mailbox option settings“ on
page 30.
Defining the “Trusted Numbers“
The system considers a“trusted number” a specially defined calling number that rightly authorizes the caller
to access their mailbox. Thus these numbers are special terminal device calling numbers freely definable by
the user who can then, after dialing the corresponding access code number, access the individual mailbox
without specifying a PIN. This can occur either via express or control mode (for example from the mobile
phone or from the private extension). In ERGO you can define up to three calling numbers as “trusted numbers“. Attention: Keep in mind that “trusted numbers“ may lead to a security problem when they get
unsealed. Everybody who is informed about which connection has been defined as “trusted“ is in full control of a foreign mailbox. Access to the express mode, however, requires the definition of at least one
trusted number..
Key
Function
9
To branch to the submenu for setting mailbox functions:
Press 9.
3
To define “trusted numbers“:
Press 3.
Subsequently you are prompted to determine one of the three storage locations for saving the “trusted number”.
To enter the storage location (1…3):
Press 1, 2 or 3.
Subsequently the “trusted number” (if already available) currently stored in
the selected location is put out.
39